[Mon Jun 18 08:08:52 2012] Detection parameters:
  Position = (348.3, 148.7) = 16 31 45.71 37 28 37.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 30.1 +/- 7.5
  Background counts = 12.5
  Rate = 0.002 +/- 0.0004

[Mon Jun 18 08:08:53 2012] Off-axis axis estimate = 11.44'
[Mon Jun 18 08:38:29 2012] Using EEF radius (= 12.15 ")to estimate initial spatial extent for simple fitting
[Mon Jun 18 08:38:29 2012] Initial guess for spatial extent in simple fitting = 12.15"
[Mon Jun 18 08:38:29 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.968
[Mon Jun 18 08:38:29 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 12.15"
[Mon Jun 18 08:56:20 2012] fullrun_mos1_xmm0033540901_pi300-10000_cl_pass0_src18.ximg exists
[Mon Jun 18 08:56:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0033540901_pi300-10000_cl_pass0_src18.csv
[Mon Jun 18 08:56:20 2012] fullrun_mos1_xmm0033540901_pi300-10000_cl_pass0_src18_1.ximg exists
[Mon Jun 18 08:56:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0033540901_pi300-10000_cl_pass0_src18.csv
[Mon Jun 18 08:56:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0033540901_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0033540901_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 08:56:20 2012] fullrun_mos1_xmm0033540901_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Mon Jun 18 08:56:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0033540901_pi300-10000_cl_pass0_tfrozen_src18.csv
[Mon Jun 18 08:56:20 2012] fullrun_mos1_xmm0033540901_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Mon Jun 18 08:56:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0033540901_pi300-10000_cl_pass0_tfrozen_src18.csv
[Mon Jun 18 08:56:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0033540901_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0033540901_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 09:09:41 2012] Spatial fit model total counts = 84.454100, observed total counts = 71.000000
[Mon Jun 18 09:09:41 2012] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 18 09:09:41 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 09:09:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 09:09:41 2012] Assessing source extent using major
[Mon Jun 18 09:09:41 2012] Source does appear to be extended
[Mon Jun 18 09:09:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 18 09:38:27 2012] Using EEF radius (= 12.15 ")to estimate initial spatial extent for simple fitting
[Mon Jun 18 09:38:27 2012] Initial guess for spatial extent in simple fitting = 12.15"
[Mon Jun 18 09:38:27 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.968
[Mon Jun 18 09:38:27 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 12.15"
[Mon Jun 18 09:54:34 2012] fullrun_mos1_xmm0033540901_pi300-10000_cl_pass1_src18.ximg exists
[Mon Jun 18 09:54:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0033540901_pi300-10000_cl_pass1_src18.csv
[Mon Jun 18 09:54:34 2012] fullrun_mos1_xmm0033540901_pi300-10000_cl_pass1_src18_1.ximg exists
[Mon Jun 18 09:54:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0033540901_pi300-10000_cl_pass1_src18.csv
[Mon Jun 18 09:54:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0033540901_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0033540901_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 09:54:34 2012] fullrun_mos1_xmm0033540901_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Mon Jun 18 09:54:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0033540901_pi300-10000_cl_pass1_tfrozen_src18.csv
[Mon Jun 18 09:54:34 2012] fullrun_mos1_xmm0033540901_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Mon Jun 18 09:54:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0033540901_pi300-10000_cl_pass1_tfrozen_src18.csv
[Mon Jun 18 09:54:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0033540901_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0033540901_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 10:13:50 2012] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 74.373853 pixels away
[Mon Jun 18 10:13:50 2012] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 14.691198 pixels away
[Mon Jun 18 10:13:50 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 10:13:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 10:13:50 2012] Assessing source extent using major
[Mon Jun 18 10:13:50 2012] Source does appear to be extended
[Mon Jun 18 10:13:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 18 10:51:02 2012] XMMSAS src. selection expression = ellipse(30251.764313, 12889.494934, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 18 10:51:02 2012] Writing source region out to fullrun_mos1_xmm0033540901_pi300-10000_pass1_cl_src6_src.reg
[Mon Jun 18 10:51:02 2012] Extracting stamp from image fullrun_mos1_xmm0033540901_pi300-10000_cl_sm2.00.img.gz, (311, 111) - (386, 186)
[Mon Jun 18 10:51:02 2012] XMMSAS bgd. selection expression = annulus(30251.764313, 12889.494934, 1087.500000, 2175.000000, X, Y)
[Mon Jun 18 10:51:02 2012] Writing fullrun_mos1_xmm0033540901_pi300-10000_pass1_cl_src6.gif
[Mon Jun 18 10:54:52 2012] Mean detx,y = (9680.72, 6779.65) 
[Mon Jun 18 10:54:54 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 18 10:55:18 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 18 10:55:18 2012] Setting source spectrum file to fullrun_mos1_xmm0033540901_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon Jun 18 10:55:18 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0033540901_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Mon Jun 18 11:01:08 2012] Not generating rmf since there are only 30 counts
[Mon Jun 18 11:01:08 2012] rmf not generated due to insufficient counts
[Mon Jun 18 11:14:15 2012] Updating aperture counts using extracted products
[Mon Jun 18 11:14:15 2012] Error reading totcts from fullrun_mos1_xmm0033540901_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon Jun 18 11:14:16 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 18 11:14:16 2012] Using photon index=1.80, rate=0.00177, arf fullrun_mos1_xmm0033540901_pi300-10000_pass1_cl_src6.arf
[Mon Jun 18 11:14:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 18 11:14:16 2012] Updating source flux to 3.4e-14
[Mon Jun 18 11:14:19 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting