[Mon Jun 18 08:08:52 2012] Detection parameters:
  Position = (121.0, 211.1) = 16 33 8.82 37 33 7.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 172.9 +/- 16.2
  Background counts = 11.8
  Rate = 0.01 +/- 0.001

[Mon Jun 18 08:08:53 2012] Off-axis axis estimate = 14.34'
[Mon Jun 18 08:38:29 2012] Using EEF radius (= 13.60 ")to estimate initial spatial extent for simple fitting
[Mon Jun 18 08:38:29 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 18 08:38:29 2012] Initial guess for spatial extent in simple fitting = 13.60"
[Mon Jun 18 08:38:29 2012] source mask rpix=3.1, npix_max = 52, mask sum = 37, frac = 0.704
[Mon Jun 18 08:38:29 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 13.60"
[Mon Jun 18 08:56:20 2012] fullrun_mos1_xmm0033540901_pi300-10000_cl_pass0_src3.ximg exists
[Mon Jun 18 08:56:20 2012] fullrun_mos1_xmm0033540901_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Jun 18 08:56:20 2012] Fit fullrun_mos1_xmm0033540901_pi300-10000_cl_pass0_src3 appears to have run properly
[Mon Jun 18 08:56:20 2012] fullrun_mos1_xmm0033540901_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Jun 18 08:56:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0033540901_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Jun 18 08:56:20 2012] fullrun_mos1_xmm0033540901_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Jun 18 08:56:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0033540901_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Jun 18 08:56:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0033540901_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0033540901_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 09:09:41 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 12.439417 pixels away
[Mon Jun 18 09:09:41 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 09:09:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 09:09:41 2012] Assessing source extent using major
[Mon Jun 18 09:09:41 2012] Source does appear to be extended
[Mon Jun 18 09:09:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 18 09:38:26 2012] Using EEF radius (= 13.60 ")to estimate initial spatial extent for simple fitting
[Mon Jun 18 09:38:26 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 18 09:38:26 2012] Initial guess for spatial extent in simple fitting = 13.60"
[Mon Jun 18 09:38:26 2012] source mask rpix=3.1, npix_max = 52, mask sum = 37, frac = 0.704
[Mon Jun 18 09:38:26 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 13.60"
[Mon Jun 18 09:54:34 2012] fullrun_mos1_xmm0033540901_pi300-10000_cl_pass1_src3.ximg exists
[Mon Jun 18 09:54:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0033540901_pi300-10000_cl_pass1_src3.csv
[Mon Jun 18 09:54:34 2012] fullrun_mos1_xmm0033540901_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Jun 18 09:54:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0033540901_pi300-10000_cl_pass1_src3.csv
[Mon Jun 18 09:54:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0033540901_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0033540901_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 09:54:34 2012] fullrun_mos1_xmm0033540901_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Jun 18 09:54:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0033540901_pi300-10000_cl_pass1_tfrozen_src3.csv
[Mon Jun 18 09:54:34 2012] fullrun_mos1_xmm0033540901_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Jun 18 09:54:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0033540901_pi300-10000_cl_pass1_tfrozen_src3.csv
[Mon Jun 18 09:54:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0033540901_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0033540901_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 18 10:13:50 2012] Spatial fit model total counts = 362.770000, observed total counts = 185.000000
[Mon Jun 18 10:13:50 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 18 10:13:50 2012] Vigneting correction estimate = 1.000000
[Mon Jun 18 10:13:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 18 10:13:50 2012] Assessing source extent using major
[Mon Jun 18 10:13:50 2012] Source does appear to be extended
[Mon Jun 18 10:13:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 18 10:51:02 2012] XMMSAS src. selection expression = ellipse(10478.700455, 18320.028137, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 18 10:51:02 2012] Writing source region out to fullrun_mos1_xmm0033540901_pi300-10000_pass1_cl_src3_src.reg
[Mon Jun 18 10:51:02 2012] Extracting stamp from image fullrun_mos1_xmm0033540901_pi300-10000_cl_sm2.00.img.gz, (84, 174) - (159, 249)
[Mon Jun 18 10:51:02 2012] XMMSAS bgd. selection expression = annulus(10478.700455, 18320.028137, 1087.500000, 2175.000000, X, Y) && !ellipse(10376.375626, 20143.547394, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 18 10:51:02 2012] Writing fullrun_mos1_xmm0033540901_pi300-10000_pass1_cl_src3.gif
[Mon Jun 18 10:51:27 2012] Mean detx,y = (-9459.43, 13758.45) 
[Mon Jun 18 10:51:28 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 18 10:51:45 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 18 10:51:45 2012] Setting source spectrum file to fullrun_mos1_xmm0033540901_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Jun 18 10:51:45 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0033540901_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon Jun 18 10:59:43 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 18 10:59:43 2012] rmf not generated due to insufficient counts
[Mon Jun 18 11:14:14 2012] Updating aperture counts using extracted products
[Mon Jun 18 11:14:14 2012] Error reading totcts from fullrun_mos1_xmm0033540901_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Jun 18 11:14:15 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 18 11:14:15 2012] Using photon index=1.80, rate=0.0102, arf fullrun_mos1_xmm0033540901_pi300-10000_pass1_cl_src3.arf
[Mon Jun 18 11:14:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 18 11:14:15 2012] Updating source flux to 3.6e-13
[Mon Jun 18 11:14:19 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting