[Sat Jul 21 23:25:07 2012] Detection parameters:
  Position = (293.9, 320.8) = 12 8 58.05 45 40 34.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 422.4 +/- 26.0
  Background counts = 32.1
  Rate = 0.03 +/- 0.002

[Sat Jul 21 23:25:07 2012] Off-axis axis estimate = 1.65'
[Sat Jul 21 23:36:30 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Sat Jul 21 23:36:30 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Sat Jul 21 23:36:30 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.851
[Sat Jul 21 23:36:30 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Sat Jul 21 23:44:19 2012] fullrun_mos2_xmm0033540601_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jul 21 23:44:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0033540601_pi300-10000_cl_pass0_src1.csv
[Sat Jul 21 23:44:19 2012] fullrun_mos2_xmm0033540601_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jul 21 23:44:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0033540601_pi300-10000_cl_pass0_src1.csv
[Sat Jul 21 23:44:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0033540601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0033540601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 23:44:19 2012] fullrun_mos2_xmm0033540601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jul 21 23:44:19 2012] fullrun_mos2_xmm0033540601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jul 21 23:44:19 2012] Fit fullrun_mos2_xmm0033540601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jul 21 23:44:23 2012] Spatial fit model total counts = 468.609000, observed total counts = 448.000000
[Sat Jul 21 23:44:23 2012] Offset between fit and detection position for source 1 = 0.138949 pixels
[Sat Jul 21 23:44:23 2012] 468.400000 total counts/ 254.224000 bgd. counts: snr = 13.432676
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.138949 pixels
  Position = (293.8, 320.7) = 12 8 58.10 45 40 33.9
  Extent = 4.8 (4.1-5.4)", rotation angle = 0
  Source counts = 214.2 +/- 21.6
  Background counts = 254.2
  Rate = 0.02 +/- 0.002
[Sat Jul 21 23:44:23 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 23:44:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 23:44:23 2012] Assessing source extent using major axis lower bound
[Sat Jul 21 23:44:23 2012] Source does appear to be extended
[Sat Jul 21 23:44:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 23:56:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 21 23:56:59 2012] Initial guess for spatial extent in simple fitting = 4.77"
[Sat Jul 21 23:56:59 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.883
[Sat Jul 21 23:56:59 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.77"
[Sun Jul 22 00:06:22 2012] fullrun_mos2_xmm0033540601_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jul 22 00:06:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0033540601_pi300-10000_cl_pass1_src1.csv
[Sun Jul 22 00:06:22 2012] fullrun_mos2_xmm0033540601_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jul 22 00:06:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0033540601_pi300-10000_cl_pass1_src1.csv
[Sun Jul 22 00:06:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0033540601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0033540601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 00:06:22 2012] fullrun_mos2_xmm0033540601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jul 22 00:06:22 2012] fullrun_mos2_xmm0033540601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jul 22 00:06:22 2012] Fit fullrun_mos2_xmm0033540601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jul 22 00:06:26 2012] Spatial fit model total counts = 468.535000, observed total counts = 448.000000
[Sun Jul 22 00:06:26 2012] Offset between fit and detection position for source 1 = 0.012751 pixels
[Sun Jul 22 00:06:26 2012] 468.392000 total counts/ 256.043000 bgd. counts: snr = 13.270698
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.012751 pixels
  Position = (293.7, 320.7) = 12 8 58.11 45 40 33.9
  Extent = 4.7 (4.1-5.4)", rotation angle = 0
  Source counts = 212.3 +/- 21.6
  Background counts = 256.0
  Rate = 0.02 +/- 0.002
[Sun Jul 22 00:06:26 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 00:06:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 00:06:26 2012] Assessing source extent using major axis lower bound
[Sun Jul 22 00:06:26 2012] Source does appear to be extended
[Sun Jul 22 00:06:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 00:22:36 2012] XMMSAS src. selection expression = ellipse(25507.675800, 27852.880800, 281.996459, 281.996459, 0.000000, X, Y)
[Sun Jul 22 00:22:36 2012] Writing source region out to fullrun_mos2_xmm0033540601_pi300-10000_pass1_cl_src1_src.reg
[Sun Jul 22 00:22:36 2012] Extracting stamp from image fullrun_mos2_xmm0033540601_pi300-10000_cl_sm2.00.img.gz, (278, 304) - (310, 337)
[Sun Jul 22 00:22:36 2012] XMMSAS bgd. selection expression = annulus(25507.675800, 27852.880800, 469.994098, 939.988195, X, Y)
[Sun Jul 22 00:22:36 2012] Writing fullrun_mos2_xmm0033540601_pi300-10000_pass1_cl_src1.gif
[Sun Jul 22 00:22:38 2012] Mean detx,y = (107.76, 27.07) 
[Sun Jul 22 00:22:39 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 22 00:22:45 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 22 00:22:45 2012] Setting source spectrum file to fullrun_mos2_xmm0033540601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jul 22 00:22:45 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0033540601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jul 22 00:32:10 2012] Updating aperture counts using extracted products
[Sun Jul 22 00:32:10 2012] Error reading totcts from fullrun_mos2_xmm0033540601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jul 22 00:32:10 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 22 00:32:10 2012] Using photon index=1.80, rate=0.0205, arf fullrun_mos2_xmm0033540601_pi300-10000_pass1_cl_src1.arf
[Sun Jul 22 00:32:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 22 00:32:10 2012] Updating source flux to 2.8e-13
[Sun Jul 22 00:32:26 2012] Reading fit data from xmm0033540601/analysis//spectral/fullrun_mos2_xmm0033540601_pi300-10000_pass1_cl_src1_pl.csv
[Sun Jul 22 00:32:26 2012] Spectral fit parameter nH value = 3.74555e+20
[Sun Jul 22 00:32:26 2012] Spectral fit parameter PhoIndex value = 1.8179
[Sun Jul 22 00:32:26 2012] Failed to get F(0.3-8.0) from xmm0033540601/analysis//spectral/fullrun_mos2_xmm0033540601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Jul 22 00:32:26 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 22 00:32:26 2012] Using Nh = 3.7e+20, photon index=1.82, rate=0.0205, arf fullrun_mos2_xmm0033540601_pi300-10000_pass1_cl_src1.arf
[Sun Jul 22 00:32:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 22 00:32:26 2012] Updating source flux to 2.9e-13