[Sat Jul 21 23:24:56 2012] Detection parameters:
  Position = (168.8, 230.5) = 12 9 49.86 45 34 0.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 60.1 +/- 11.7
  Background counts = 25.2
  Rate = 0.005 +/- 0.0009

[Sat Jul 21 23:24:56 2012] Off-axis axis estimate = 10.61'
[Sat Jul 21 23:32:30 2012] Using EEF radius (= 11.73 ")to estimate initial spatial extent for simple fitting
[Sat Jul 21 23:32:30 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 21 23:32:30 2012] Initial guess for spatial extent in simple fitting = 11.73"
[Sat Jul 21 23:32:30 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.027
[Sat Jul 21 23:32:30 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 11.73"
[Sat Jul 21 23:36:30 2012] fullrun_mos1_xmm0033540601_pi300-10000_cl_pass0_src4.ximg exists
[Sat Jul 21 23:36:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0033540601_pi300-10000_cl_pass0_src4.csv
[Sat Jul 21 23:36:30 2012] fullrun_mos1_xmm0033540601_pi300-10000_cl_pass0_src4_1.ximg exists
[Sat Jul 21 23:36:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0033540601_pi300-10000_cl_pass0_src4.csv
[Sat Jul 21 23:36:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0033540601_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0033540601_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 23:36:30 2012] fullrun_mos1_xmm0033540601_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sat Jul 21 23:36:30 2012] fullrun_mos1_xmm0033540601_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sat Jul 21 23:36:30 2012] Fit fullrun_mos1_xmm0033540601_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Sat Jul 21 23:44:22 2012] Spatial fit model total counts = 193.355000, observed total counts = 194.000000
[Sat Jul 21 23:44:22 2012] Offset between fit and detection position for source 3 = 0.236470 pixels
[Sat Jul 21 23:44:22 2012] 192.519700 total counts/ 161.544000 bgd. counts: snr = 2.437113
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.236470 pixels
  Position = (169.0, 230.3) = 12 9 49.80 45 33 59.9
  Extent = 4.5 (3.0-6.9)", rotation angle = 0
  Source counts = 31.0 +/- 13.9
  Background counts = 161.5
  Rate = 0.003 +/- 0.001
[Sat Jul 21 23:44:22 2012] Vigneting correction estimate = 1.000000
[Sat Jul 21 23:44:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 21 23:44:22 2012] Assessing source extent using major axis lower bound
[Sat Jul 21 23:44:22 2012] Source does appear to be extended
[Sat Jul 21 23:44:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 21 23:52:44 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 21 23:52:44 2012] Initial guess for spatial extent in simple fitting = 4.49"
[Sat Jul 21 23:52:44 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.957
[Sat Jul 21 23:52:44 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 4.49"
[Sat Jul 21 23:56:59 2012] fullrun_mos1_xmm0033540601_pi300-10000_cl_pass1_src4.ximg exists
[Sat Jul 21 23:56:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0033540601_pi300-10000_cl_pass1_src4.csv
[Sat Jul 21 23:56:59 2012] fullrun_mos1_xmm0033540601_pi300-10000_cl_pass1_src4_1.ximg exists
[Sat Jul 21 23:56:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0033540601_pi300-10000_cl_pass1_src4.csv
[Sat Jul 21 23:56:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0033540601_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0033540601_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 21 23:56:59 2012] fullrun_mos1_xmm0033540601_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sat Jul 21 23:56:59 2012] fullrun_mos1_xmm0033540601_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sat Jul 21 23:56:59 2012] Fit fullrun_mos1_xmm0033540601_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Sun Jul 22 00:06:25 2012] Spatial fit model total counts = 194.518000, observed total counts = 195.000000
[Sun Jul 22 00:06:25 2012] Offset between fit and detection position for source 3 = 0.035247 pixels
[Sun Jul 22 00:06:25 2012] 193.543900 total counts/ 162.438000 bgd. counts: snr = 2.440613
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.035247 pixels
  Position = (169.0, 230.3) = 12 9 49.80 45 33 59.7
  Extent = 4.5 (3.0-6.8)", rotation angle = 0
  Source counts = 31.1 +/- 13.9
  Background counts = 162.4
  Rate = 0.003 +/- 0.001
[Sun Jul 22 00:06:25 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 00:06:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 00:06:25 2012] Assessing source extent using major axis lower bound
[Sun Jul 22 00:06:25 2012] Source does appear to be extended
[Sun Jul 22 00:06:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 00:17:13 2012] XMMSAS src. selection expression = ellipse(14650.313020, 19985.370000, 272.874008, 272.874008, 0.000000, X, Y)
[Sun Jul 22 00:17:13 2012] Writing source region out to fullrun_mos1_xmm0033540601_pi300-10000_pass1_cl_src3_src.reg
[Sun Jul 22 00:17:13 2012] Extracting stamp from image fullrun_mos1_xmm0033540601_pi300-10000_cl_sm2.00.img.gz, (153, 215) - (185, 246)
[Sun Jul 22 00:17:13 2012] XMMSAS bgd. selection expression = annulus(14650.313020, 19985.370000, 454.790013, 909.580026, X, Y)
[Sun Jul 22 00:17:13 2012] Writing fullrun_mos1_xmm0033540601_pi300-10000_pass1_cl_src3.gif
[Sun Jul 22 00:18:02 2012] Mean detx,y = (2444.96, -13508.77) 
[Sun Jul 22 00:18:03 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 22 00:18:10 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 22 00:18:10 2012] Setting source spectrum file to fullrun_mos1_xmm0033540601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Jul 22 00:18:10 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0033540601_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Jul 22 00:22:31 2012] Not generating rmf since there are only 31 counts
[Sun Jul 22 00:22:31 2012] rmf not generated due to insufficient counts
[Sun Jul 22 00:32:09 2012] Updating aperture counts using extracted products
[Sun Jul 22 00:32:10 2012] Error reading totcts from fullrun_mos1_xmm0033540601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Jul 22 00:32:10 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 22 00:32:10 2012] Using photon index=1.80, rate=0.00297, arf fullrun_mos1_xmm0033540601_pi300-10000_pass1_cl_src3.arf
[Sun Jul 22 00:32:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 22 00:32:10 2012] Updating source flux to 1e-13
[Sun Jul 22 00:32:10 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting