[Thu Jul  5 01:45:51 2012] Detection parameters:
  Position = (263.8, 101.2) = 17 58 47.60 -34 1 16.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39.4 +/- 8.5
  Background counts = 7.1
  Rate = 0.002 +/- 0.0005

[Thu Jul  5 01:45:51 2012] Off-axis axis estimate = 14.52'
[Thu Jul  5 02:11:52 2012] Using EEF radius (= 13.69 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 02:11:52 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul  5 02:11:52 2012] Initial guess for spatial extent in simple fitting = 13.69"
[Thu Jul  5 02:11:52 2012] source mask rpix=3.1, npix_max = 53, mask sum = 49, frac = 0.921
[Thu Jul  5 02:11:52 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 13.69"
[Thu Jul  5 02:33:46 2012] fullrun_mos1_xmm0032940101_pi300-10000_cl_pass0_src19.ximg exists
[Thu Jul  5 02:33:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0032940101_pi300-10000_cl_pass0_src19.csv
[Thu Jul  5 02:33:46 2012] fullrun_mos1_xmm0032940101_pi300-10000_cl_pass0_src19_1.ximg exists
[Thu Jul  5 02:33:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0032940101_pi300-10000_cl_pass0_src19.csv
[Thu Jul  5 02:33:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0032940101_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0032940101_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 02:33:46 2012] fullrun_mos1_xmm0032940101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Thu Jul  5 02:33:46 2012] fullrun_mos1_xmm0032940101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Thu Jul  5 02:33:46 2012] Fit fullrun_mos1_xmm0032940101_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Thu Jul  5 02:49:51 2012] Spatial fit model total counts = 141.176000, observed total counts = 137.000000
[Thu Jul  5 02:49:51 2012] Offset between fit and detection position for source 6 = 0.170441 pixels
[Thu Jul  5 02:49:51 2012] 140.859100 total counts/ 122.752000 bgd. counts: snr = 1.634311
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.170441 pixels
  Position = (263.7, 101.2) = 17 58 47.66 -34 1 15.9
  Extent = 3.4" x 3.4", rotation angle = 0
  Source counts = 18.1 +/- 11.9
  Background counts = 122.8
  Rate = 0.001 +/- 0.0007
  Deleting source due to low Poisson probability