[Thu Jul  5 01:45:51 2012] Detection parameters:
  Position = (404.1, 305.8) = 17 57 58.62 -33 46 26.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 182.4 +/- 16.4
  Background counts = 7.4
  Rate = 0.01 +/- 0.0009

[Thu Jul  5 01:45:51 2012] Off-axis axis estimate = 7.68'
[Thu Jul  5 02:11:52 2012] Using EEF radius (= 10.27 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 02:11:52 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul  5 02:11:52 2012] Initial guess for spatial extent in simple fitting = 10.27"
[Thu Jul  5 02:11:52 2012] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.100
[Thu Jul  5 02:11:52 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 10.27"
[Thu Jul  5 02:33:45 2012] fullrun_mos1_xmm0032940101_pi300-10000_cl_pass0_src2.ximg exists
[Thu Jul  5 02:33:45 2012] fullrun_mos1_xmm0032940101_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu Jul  5 02:33:45 2012] Fit fullrun_mos1_xmm0032940101_pi300-10000_cl_pass0_src2 appears to have run properly
[Thu Jul  5 02:33:46 2012] fullrun_mos1_xmm0032940101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu Jul  5 02:33:46 2012] fullrun_mos1_xmm0032940101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Jul  5 02:33:46 2012] Fit fullrun_mos1_xmm0032940101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Thu Jul  5 02:49:51 2012] Spatial fit model total counts = 233.000000, observed total counts = 233.000000
[Thu Jul  5 02:49:51 2012] Offset between fit and detection position for source 1 = 0.321525 pixels
[Thu Jul  5 02:49:51 2012] 231.052000 total counts/ 103.144000 bgd. counts: snr = 12.594349
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.321525 pixels
  Position = (403.8, 305.7) = 17 57 58.72 -33 46 26.0
  Extent = 5.4 (4.6-6.4)", rotation angle = 0
  Source counts = 127.9 +/- 15.2
  Background counts = 103.1
  Rate = 0.007 +/- 0.0008
[Thu Jul  5 02:49:51 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 02:49:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 02:49:51 2012] Assessing source extent using major axis lower bound
[Thu Jul  5 02:49:51 2012] Source does appear to be extended
[Thu Jul  5 02:49:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 03:16:15 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul  5 03:16:15 2012] Initial guess for spatial extent in simple fitting = 5.38"
[Thu Jul  5 03:16:15 2012] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.996
[Thu Jul  5 03:16:15 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 5.38"
[Thu Jul  5 03:33:53 2012] fullrun_mos1_xmm0032940101_pi300-10000_cl_pass1_src2.ximg exists
[Thu Jul  5 03:33:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0032940101_pi300-10000_cl_pass1_src2.csv
[Thu Jul  5 03:33:53 2012] fullrun_mos1_xmm0032940101_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu Jul  5 03:33:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0032940101_pi300-10000_cl_pass1_src2.csv
[Thu Jul  5 03:33:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0032940101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0032940101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 03:33:54 2012] fullrun_mos1_xmm0032940101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu Jul  5 03:33:54 2012] fullrun_mos1_xmm0032940101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Jul  5 03:33:54 2012] Fit fullrun_mos1_xmm0032940101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Thu Jul  5 03:49:46 2012] Spatial fit model total counts = 232.045000, observed total counts = 233.000000
[Thu Jul  5 03:49:46 2012] Offset between fit and detection position for source 1 = 0.035275 pixels
[Thu Jul  5 03:49:46 2012] 230.097000 total counts/ 102.058000 bgd. counts: snr = 12.674147
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.035275 pixels
  Position = (403.8, 305.7) = 17 57 58.73 -33 46 25.9
  Extent = 5.4 (4.6-6.4)", rotation angle = 0
  Source counts = 128.0 +/- 15.2
  Background counts = 102.1
  Rate = 0.007 +/- 0.0008
[Thu Jul  5 03:49:46 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 03:49:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 03:49:46 2012] Assessing source extent using major axis lower bound
[Thu Jul  5 03:49:46 2012] Source does appear to be extended
[Thu Jul  5 03:49:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 04:17:30 2012] XMMSAS src. selection expression = ellipse(35081.416840, 26547.965200, 325.104609, 325.104609, 0.000000, X, Y)
[Thu Jul  5 04:17:30 2012] Writing source region out to fullrun_mos1_xmm0032940101_pi300-10000_pass1_cl_src1_src.reg
[Thu Jul  5 04:17:30 2012] Extracting stamp from image fullrun_mos1_xmm0032940101_pi300-10000_cl_sm2.00.img.gz, (385, 287) - (422, 324)
[Thu Jul  5 04:17:30 2012] XMMSAS bgd. selection expression = annulus(35081.416840, 26547.965200, 541.841016, 1083.682031, X, Y)
[Thu Jul  5 04:17:30 2012] Writing fullrun_mos1_xmm0032940101_pi300-10000_pass1_cl_src1.gif
[Thu Jul  5 04:17:46 2012] Mean detx,y = (-2085.41, -10520.12) 
[Thu Jul  5 04:17:47 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul  5 04:17:54 2012] Binned source spectrum to 10 counts/bin
[Thu Jul  5 04:17:54 2012] Setting source spectrum file to fullrun_mos1_xmm0032940101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jul  5 04:17:54 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0032940101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jul  5 04:31:49 2012] Updating aperture counts using extracted products
[Thu Jul  5 04:31:49 2012] Error reading totcts from fullrun_mos1_xmm0032940101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jul  5 04:31:49 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul  5 04:31:49 2012] Using photon index=1.80, rate=0.00706, arf fullrun_mos1_xmm0032940101_pi300-10000_pass1_cl_src1.arf
[Thu Jul  5 04:31:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul  5 04:31:49 2012] Updating source flux to 1.8e-13
[Thu Jul  5 04:32:00 2012] Reading fit data from xmm0032940101/analysis//spectral/fullrun_mos1_xmm0032940101_pi300-10000_pass1_cl_src1_pl.csv
[Thu Jul  5 04:32:00 2012] Spectral fit parameter nH value = 4.09913e+13
[Thu Jul  5 04:32:00 2012] Spectral fit parameter PhoIndex value = 1.67571
[Thu Jul  5 04:32:00 2012] Failed to get F(0.3-8.0) from xmm0032940101/analysis//spectral/fullrun_mos1_xmm0032940101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Jul  5 04:32:00 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul  5 04:32:00 2012] Using Nh = 4.1e+13, photon index=1.68, rate=0.00706, arf fullrun_mos1_xmm0032940101_pi300-10000_pass1_cl_src1.arf
[Thu Jul  5 04:32:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul  5 04:32:00 2012] Updating source flux to 1.9e-13