[Fri Jun 15 10:06:38 2012] Detection parameters:
  Position = (357.9, 141.9) = 9 27 30.27 -6 17 23.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 19.1 +/- 5.6
  Background counts = 1.3
  Rate = 0.003 +/- 0.001

[Fri Jun 15 10:06:38 2012] Off-axis axis estimate = 12.14'
[Fri Jun 15 10:20:39 2012] Using EEF radius (= 12.50 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 10:20:39 2012] Initial guess for spatial extent in simple fitting = 12.50"
[Fri Jun 15 10:20:39 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.923
[Fri Jun 15 10:20:39 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 12.50"
[Fri Jun 15 10:32:41 2012] fullrun_mos2_xmm0032342201_pi300-10000_cl_pass0_src6.ximg exists
[Fri Jun 15 10:32:41 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0032342201_pi300-10000_cl_pass0_src6.csv
[Fri Jun 15 10:32:41 2012] fullrun_mos2_xmm0032342201_pi300-10000_cl_pass0_src6_1.ximg exists
[Fri Jun 15 10:32:41 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0032342201_pi300-10000_cl_pass0_src6.csv
[Fri Jun 15 10:32:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0032342201_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0032342201_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 10:32:41 2012] fullrun_mos2_xmm0032342201_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Fri Jun 15 10:32:41 2012] fullrun_mos2_xmm0032342201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Jun 15 10:32:41 2012] Fit fullrun_mos2_xmm0032342201_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Fri Jun 15 10:32:49 2012] Spatial fit model total counts = 33.992200, observed total counts = 34.000000
[Fri Jun 15 10:32:49 2012] Offset between fit and detection position for source 3 = 0.243991 pixels
[Fri Jun 15 10:32:49 2012] 34.615700 total counts/ 24.036100 bgd. counts: snr = 2.157929
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.243991 pixels
  Position = (357.7, 142.0) = 9 27 30.33 -6 17 21.5
  Extent = 4.2 (3.1-6.1)", rotation angle = 0
  Source counts = 10.6 +/- 5.9
  Background counts = 24.0
  Rate = 0.002 +/- 0.001
[Fri Jun 15 10:32:49 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 10:32:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 10:32:49 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 10:32:49 2012] Source does appear to be extended
[Fri Jun 15 10:32:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 10:42:18 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 15 10:42:18 2012] Initial guess for spatial extent in simple fitting = 4.16"
[Fri Jun 15 10:42:18 2012] source mask rpix=1.0, npix_max = 8, mask sum = 6, frac = 0.707
[Fri Jun 15 10:42:18 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 4.16"
[Fri Jun 15 10:53:07 2012] fullrun_mos2_xmm0032342201_pi300-10000_cl_pass1_src6.ximg exists
[Fri Jun 15 10:53:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0032342201_pi300-10000_cl_pass1_src6.csv
[Fri Jun 15 10:53:07 2012] fullrun_mos2_xmm0032342201_pi300-10000_cl_pass1_src6_1.ximg exists
[Fri Jun 15 10:53:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0032342201_pi300-10000_cl_pass1_src6.csv
[Fri Jun 15 10:53:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0032342201_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0032342201_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 10:53:07 2012] fullrun_mos2_xmm0032342201_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Fri Jun 15 10:53:07 2012] fullrun_mos2_xmm0032342201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Jun 15 10:53:07 2012] Fit fullrun_mos2_xmm0032342201_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Fri Jun 15 10:53:11 2012] Spatial fit model total counts = 30.996700, observed total counts = 31.000000
[Fri Jun 15 10:53:11 2012] Offset between fit and detection position for source 3 = 0.392005 pixels
[Fri Jun 15 10:53:11 2012] 31.969400 total counts/ 18.648000 bgd. counts: snr = 3.084848
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.392005 pixels
  Position = (357.6, 141.6) = 9 27 30.35 -6 17 23.2
  Extent = 5.9 (2.9-8.3)", rotation angle = 0
  Source counts = 13.3 +/- 5.7
  Background counts = 18.6
  Rate = 0.002 +/- 0.001
[Fri Jun 15 10:53:11 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 10:53:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 10:53:11 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 10:53:11 2012] Source does appear to be extended
[Fri Jun 15 10:53:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 10:53:11 2012] Deleting source due to low Poisson probability 0.9