[Fri Jun 15 10:06:38 2012] Detection parameters:
  Position = (301.5, 322.1) = 9 27 46.71 -6 4 17.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1134.8 +/- 39.5
  Background counts = 4.1
  Rate = 0.2 +/- 0.007

[Fri Jun 15 10:06:38 2012] Off-axis axis estimate = 1.73'
[Fri Jun 15 10:20:39 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 10:20:39 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Fri Jun 15 10:20:39 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.055
[Fri Jun 15 10:20:39 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Fri Jun 15 10:32:41 2012] fullrun_mos2_xmm0032342201_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun 15 10:32:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0032342201_pi300-10000_cl_pass0_src1.csv
[Fri Jun 15 10:32:41 2012] fullrun_mos2_xmm0032342201_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun 15 10:32:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0032342201_pi300-10000_cl_pass0_src1.csv
[Fri Jun 15 10:32:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0032342201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0032342201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 10:32:41 2012] fullrun_mos2_xmm0032342201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun 15 10:32:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0032342201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Jun 15 10:32:41 2012] fullrun_mos2_xmm0032342201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun 15 10:32:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0032342201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Jun 15 10:32:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0032342201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0032342201_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 10:32:49 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 16.272502 pixels away
[Fri Jun 15 10:32:49 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 10:32:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 10:32:49 2012] Assessing source extent using major
[Fri Jun 15 10:32:49 2012] Source does appear to be extended
[Fri Jun 15 10:32:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 10:42:18 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 10:42:18 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Fri Jun 15 10:42:18 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.055
[Fri Jun 15 10:42:18 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.29"
[Fri Jun 15 10:53:07 2012] fullrun_mos2_xmm0032342201_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun 15 10:53:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0032342201_pi300-10000_cl_pass1_src1.csv
[Fri Jun 15 10:53:07 2012] fullrun_mos2_xmm0032342201_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun 15 10:53:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0032342201_pi300-10000_cl_pass1_src1.csv
[Fri Jun 15 10:53:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0032342201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0032342201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 10:53:07 2012] fullrun_mos2_xmm0032342201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun 15 10:53:07 2012] fullrun_mos2_xmm0032342201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun 15 10:53:07 2012] Fit fullrun_mos2_xmm0032342201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jun 15 10:53:11 2012] Spatial fit model total counts = 1094.540000, observed total counts = 1058.000000
[Fri Jun 15 10:53:11 2012] Offset between fit and detection position for source 1 = 0.277975 pixels
[Fri Jun 15 10:53:11 2012] 1102.455000 total counts/ 322.245000 bgd. counts: snr = 43.462872
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.277975 pixels
  Position = (301.3, 322.2) = 9 27 46.79 -6 4 17.6
  Extent = 5.0 (4.7-5.4)", rotation angle = 0
  Source counts = 780.2 +/- 33.2
  Background counts = 322.2
  Rate = 0.1 +/- 0.006
[Fri Jun 15 10:53:11 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 10:53:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 10:53:11 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 10:53:11 2012] Source does appear to be extended
[Fri Jun 15 10:53:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 11:02:20 2012] XMMSAS src. selection expression = ellipse(26161.329400, 27983.465800, 302.207409, 302.207409, 0.000000, X, Y)
[Fri Jun 15 11:02:20 2012] Writing source region out to fullrun_mos2_xmm0032342201_pi300-10000_pass1_cl_src1_src.reg
[Fri Jun 15 11:02:20 2012] Extracting stamp from image fullrun_mos2_xmm0032342201_pi300-10000_cl_sm2.00.img.gz, (284, 305) - (319, 340)
[Fri Jun 15 11:02:20 2012] XMMSAS bgd. selection expression = annulus(26161.329400, 27983.465800, 503.679014, 1007.358029, X, Y)
[Fri Jun 15 11:02:20 2012] Writing fullrun_mos2_xmm0032342201_pi300-10000_pass1_cl_src1.gif
[Fri Jun 15 11:02:23 2012] Mean detx,y = (69.71, 125.57) 
[Fri Jun 15 11:02:24 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 15 11:02:32 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 15 11:02:32 2012] Setting source spectrum file to fullrun_mos2_xmm0032342201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 15 11:02:32 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0032342201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jun 15 11:07:48 2012] Updating aperture counts using extracted products
[Fri Jun 15 11:07:48 2012] Error reading totcts from fullrun_mos2_xmm0032342201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun 15 11:07:48 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 11:07:48 2012] Using photon index=1.80, rate=0.134, arf fullrun_mos2_xmm0032342201_pi300-10000_pass1_cl_src1.arf
[Fri Jun 15 11:07:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 11:07:48 2012] Updating source flux to 1.9e-12
[Fri Jun 15 11:07:57 2012] Reading fit data from xmm0032342201/analysis//spectral/fullrun_mos2_xmm0032342201_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jun 15 11:07:57 2012] Spectral fit parameter nH value = 2.88247e+21
[Fri Jun 15 11:07:57 2012] Spectral fit parameter PhoIndex value = 4.11822
[Fri Jun 15 11:07:57 2012] Failed to get F(0.3-8.0) from xmm0032342201/analysis//spectral/fullrun_mos2_xmm0032342201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jun 15 11:07:57 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 15 11:07:57 2012] Using Nh = 2.9e+21, photon index=4.12, rate=0.134, arf fullrun_mos2_xmm0032342201_pi300-10000_pass1_cl_src1.arf
[Fri Jun 15 11:07:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 15 11:07:57 2012] Updating source flux to 1.2e-12