[Wed Jun 13 08:55:01 2012] Detection parameters:
  Position = (222.2, 170.3) = 13 5 34.32 -10 28 38.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57.2 +/- 10.8
  Background counts = 15.2
  Rate = 0.009 +/- 0.002

[Wed Jun 13 08:55:01 2012] Off-axis axis estimate = 10.81'
[Wed Jun 13 08:56:27 2012] Using EEF radius (= 11.83 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 08:56:27 2012] Initial guess for spatial extent in simple fitting = 11.83"
[Wed Jun 13 08:56:27 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.013
[Wed Jun 13 08:56:27 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 11.83"
[Wed Jun 13 09:40:26 2012] fullrun_pn_xmm0032141201_pi300-10000_cl_pass0_src27.ximg exists
[Wed Jun 13 09:40:26 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0032141201_pi300-10000_cl_pass0_src27.csv
[Wed Jun 13 09:40:26 2012] fullrun_pn_xmm0032141201_pi300-10000_cl_pass0_src27_1.ximg exists
[Wed Jun 13 09:40:26 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0032141201_pi300-10000_cl_pass0_src27.csv
[Wed Jun 13 09:40:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0032141201_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0032141201_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 09:40:26 2012] fullrun_pn_xmm0032141201_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Wed Jun 13 09:40:26 2012] fullrun_pn_xmm0032141201_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Wed Jun 13 09:40:26 2012] Fit fullrun_pn_xmm0032141201_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Wed Jun 13 10:18:36 2012] Spatial fit model total counts = 340.520000, observed total counts = 324.000000
[Wed Jun 13 10:18:36 2012] Offset between fit and detection position for source 29 = 0.490460 pixels
[Wed Jun 13 10:18:36 2012] 337.878400 total counts/ 287.221000 bgd. counts: snr = 2.989061
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.490460 pixels
  Position = (221.8, 170.4) = 13 5 34.46 -10 28 38.6
  Extent = 6.8 (4.4-9.6)", rotation angle = 0
  Source counts = 50.7 +/- 18.4
  Background counts = 287.2
  Rate = 0.004 +/- 0.001
[Wed Jun 13 10:18:36 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 10:18:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 10:18:36 2012] Assessing source extent using major axis lower bound
[Wed Jun 13 10:18:36 2012] Source does appear to be extended
[Wed Jun 13 10:18:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 10:18:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 13 10:18:49 2012] Initial guess for spatial extent in simple fitting = 6.76"
[Wed Jun 13 10:18:49 2012] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.949
[Wed Jun 13 10:18:49 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 6.76"
[Wed Jun 13 11:08:22 2012] fullrun_pn_xmm0032141201_pi300-10000_cl_pass1_src26.ximg exists
[Wed Jun 13 11:08:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0032141201_pi300-10000_cl_pass1_src26.csv
[Wed Jun 13 11:08:22 2012] fullrun_pn_xmm0032141201_pi300-10000_cl_pass1_src26_1.ximg exists
[Wed Jun 13 11:08:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0032141201_pi300-10000_cl_pass1_src26.csv
[Wed Jun 13 11:08:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0032141201_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0032141201_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 11:08:23 2012] fullrun_pn_xmm0032141201_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Wed Jun 13 11:08:23 2012] fullrun_pn_xmm0032141201_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Wed Jun 13 11:08:23 2012] Fit fullrun_pn_xmm0032141201_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Wed Jun 13 11:44:53 2012] Warning, spatial fit 26 centroid is now closest to src. 32
[Wed Jun 13 11:44:53 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 11:44:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 11:44:53 2012] Assessing source extent using major axis lower bound
[Wed Jun 13 11:44:53 2012] Source does appear to be extended
[Wed Jun 13 11:44:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 11:45:05 2012] XMMSAS src. selection expression = ellipse(19244.770000, 14778.663600, 405.471612, 405.471612, 0.000000, X, Y)
[Wed Jun 13 11:45:05 2012] Writing source region out to fullrun_pn_xmm0032141201_pi300-10000_pass1_cl_src29_src.reg
[Wed Jun 13 11:45:05 2012] Extracting stamp from image fullrun_pn_xmm0032141201_pi300-10000_cl_sm2.00.img.gz, (198, 147) - (245, 194)
[Wed Jun 13 11:45:05 2012] XMMSAS bgd. selection expression = annulus(19244.770000, 14778.663600, 675.786019, 1351.572039, X, Y) && !ellipse(20534.785800, 15748.846800, 487.357386, 487.357386, 0.000000, X, Y)
[Wed Jun 13 11:45:05 2012] Writing fullrun_pn_xmm0032141201_pi300-10000_pass1_cl_src29.gif
[Wed Jun 13 12:00:10 2012] Mean detx,y = (9602.60, -5956.28) 
[Wed Jun 13 12:00:13 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 13 12:00:36 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 13 12:00:36 2012] Setting source spectrum file to fullrun_pn_xmm0032141201_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Wed Jun 13 12:00:36 2012] Setting bgd. spectrum file to fullrun_pn_xmm0032141201_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Wed Jun 13 12:19:11 2012] Not generating rmf since there are only 50 counts
[Wed Jun 13 12:19:11 2012] rmf not generated due to insufficient counts
[Wed Jun 13 12:41:06 2012] Updating aperture counts using extracted products
[Wed Jun 13 12:41:06 2012] Error reading totcts from fullrun_pn_xmm0032141201_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Wed Jun 13 12:41:07 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 13 12:41:07 2012] Using photon index=1.80, rate=0.00396, arf fullrun_pn_xmm0032141201_pi300-10000_pass1_cl_src29.arf
[Wed Jun 13 12:41:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 13 12:41:07 2012] Updating source flux to 2.1e-14
[Wed Jun 13 12:41:38 2012] Source 29 has fewer than 100.000000 counts, skipping spectral fitting