[Wed Jun 13 08:55:32 2012] Detection parameters:
  Position = (380.1, 342.2) = 13 4 47.78 -10 16 10.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 33.6 +/- 7.8
  Background counts = 4.6
  Rate = 0.004 +/- 0.001

[Wed Jun 13 08:55:32 2012] Off-axis axis estimate = 6.72'
[Wed Jun 13 09:55:55 2012] Using EEF radius (= 9.79 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 09:55:55 2012] Initial guess for spatial extent in simple fitting = 9.79"
[Wed Jun 13 09:55:55 2012] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.190
[Wed Jun 13 09:55:55 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 9.79"
[Wed Jun 13 10:18:29 2012] fullrun_mos2_xmm0032141201_pi300-10000_cl_pass0_src7.ximg exists
[Wed Jun 13 10:18:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0032141201_pi300-10000_cl_pass0_src7.csv
[Wed Jun 13 10:18:29 2012] fullrun_mos2_xmm0032141201_pi300-10000_cl_pass0_src7_1.ximg exists
[Wed Jun 13 10:18:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0032141201_pi300-10000_cl_pass0_src7.csv
[Wed Jun 13 10:18:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0032141201_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0032141201_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 10:18:29 2012] fullrun_mos2_xmm0032141201_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Wed Jun 13 10:18:29 2012] fullrun_mos2_xmm0032141201_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Wed Jun 13 10:18:29 2012] Fit fullrun_mos2_xmm0032141201_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Wed Jun 13 10:18:41 2012] Spatial fit model total counts = 68.996500, observed total counts = 69.000000
[Wed Jun 13 10:18:41 2012] Offset between fit and detection position for source 4 = 0.295340 pixels
[Wed Jun 13 10:18:41 2012] 69.790500 total counts/ 47.235400 bgd. counts: snr = 3.281791
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.295340 pixels
  Position = (379.8, 342.3) = 13 4 47.87 -10 16 11.2
  Extent = 4.9 (3.5-7.3)", rotation angle = 0
  Source counts = 22.6 +/- 8.4
  Background counts = 47.2
  Rate = 0.002 +/- 0.0006
[Wed Jun 13 10:18:41 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 10:18:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 10:18:41 2012] Assessing source extent using major axis lower bound
[Wed Jun 13 10:18:41 2012] Source does appear to be extended
[Wed Jun 13 10:18:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 11:24:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 13 11:24:40 2012] Initial guess for spatial extent in simple fitting = 4.88"
[Wed Jun 13 11:24:40 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.855
[Wed Jun 13 11:24:40 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 4.88"
[Wed Jun 13 11:44:47 2012] fullrun_mos2_xmm0032141201_pi300-10000_cl_pass1_src7.ximg exists
[Wed Jun 13 11:44:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0032141201_pi300-10000_cl_pass1_src7.csv
[Wed Jun 13 11:44:47 2012] fullrun_mos2_xmm0032141201_pi300-10000_cl_pass1_src7_1.ximg exists
[Wed Jun 13 11:44:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0032141201_pi300-10000_cl_pass1_src7.csv
[Wed Jun 13 11:44:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0032141201_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0032141201_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 11:44:47 2012] fullrun_mos2_xmm0032141201_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Wed Jun 13 11:44:47 2012] fullrun_mos2_xmm0032141201_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Wed Jun 13 11:44:47 2012] Fit fullrun_mos2_xmm0032141201_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Wed Jun 13 11:44:58 2012] Spatial fit model total counts = 68.998500, observed total counts = 69.000000
[Wed Jun 13 11:44:58 2012] Offset between fit and detection position for source 4 = 0.006103 pixels
[Wed Jun 13 11:44:58 2012] 69.792900 total counts/ 47.101500 bgd. counts: snr = 3.306313
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.006103 pixels
  Position = (379.8, 342.2) = 13 4 47.87 -10 16 11.2
  Extent = 4.9 (3.6-7.3)", rotation angle = 0
  Source counts = 22.7 +/- 8.4
  Background counts = 47.1
  Rate = 0.002 +/- 0.0006
[Wed Jun 13 11:44:58 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 11:44:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 11:44:58 2012] Assessing source extent using major axis lower bound
[Wed Jun 13 11:44:58 2012] Source does appear to be extended
[Wed Jun 13 11:44:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 12:28:07 2012] XMMSAS src. selection expression = ellipse(32995.444660, 29726.739200, 296.580609, 296.580609, 0.000000, X, Y)
[Wed Jun 13 12:28:07 2012] Writing source region out to fullrun_mos2_xmm0032141201_pi300-10000_pass1_cl_src4_src.reg
[Wed Jun 13 12:28:07 2012] Extracting stamp from image fullrun_mos2_xmm0032141201_pi300-10000_cl_sm2.00.img.gz, (363, 325) - (397, 359)
[Wed Jun 13 12:28:07 2012] XMMSAS bgd. selection expression = annulus(32995.444660, 29726.739200, 494.301014, 988.602028, X, Y)
[Wed Jun 13 12:28:07 2012] Writing fullrun_mos2_xmm0032141201_pi300-10000_pass1_cl_src4.gif
[Wed Jun 13 12:31:17 2012] Mean detx,y = (9202.75, -2285.11) 
[Wed Jun 13 12:31:18 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 13 12:31:25 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 13 12:31:25 2012] Setting source spectrum file to fullrun_mos2_xmm0032141201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Jun 13 12:31:25 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0032141201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed Jun 13 12:40:18 2012] Not generating rmf since there are only 22 counts
[Wed Jun 13 12:40:18 2012] rmf not generated due to insufficient counts
[Wed Jun 13 12:41:07 2012] Updating aperture counts using extracted products
[Wed Jun 13 12:41:07 2012] Error reading totcts from fullrun_mos2_xmm0032141201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Jun 13 12:41:07 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 13 12:41:07 2012] Using photon index=1.80, rate=0.00167, arf fullrun_mos2_xmm0032141201_pi300-10000_pass1_cl_src4.arf
[Wed Jun 13 12:41:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 13 12:41:07 2012] Updating source flux to 3.8e-14
[Wed Jun 13 12:41:18 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting