[Wed Jun 13 08:55:32 2012] Detection parameters:
  Position = (226.0, 105.9) = 13 5 33.21 -10 33 19.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3532.3 +/- 70.7
  Background counts = 5.0
  Rate = 0.3 +/- 0.005

[Wed Jun 13 08:55:32 2012] Off-axis axis estimate = 14.91'
[Wed Jun 13 09:55:55 2012] Using EEF radius (= 13.89 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 09:55:55 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 13 09:55:55 2012] Initial guess for spatial extent in simple fitting = 13.89"
[Wed Jun 13 09:55:55 2012] source mask rpix=3.2, npix_max = 54, mask sum = 64, frac = 1.174
[Wed Jun 13 09:55:55 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 13.89"
[Wed Jun 13 10:18:29 2012] fullrun_mos2_xmm0032141201_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jun 13 10:18:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0032141201_pi300-10000_cl_pass0_src1.csv
[Wed Jun 13 10:18:29 2012] fullrun_mos2_xmm0032141201_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jun 13 10:18:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0032141201_pi300-10000_cl_pass0_src1.csv
[Wed Jun 13 10:18:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0032141201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0032141201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 10:18:29 2012] fullrun_mos2_xmm0032141201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jun 13 10:18:29 2012] fullrun_mos2_xmm0032141201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jun 13 10:18:29 2012] Fit fullrun_mos2_xmm0032141201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jun 13 10:18:41 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 18.128547 pixels away
[Wed Jun 13 10:18:41 2012] Source 14 is offset by 6.974483 and -3.680707 pixels which is larger than
2 X fitted extent = 4.922621 x 4.922621, not incorporating fit results
[Wed Jun 13 10:18:41 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 10:18:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 10:18:41 2012] Assessing source extent using major
[Wed Jun 13 10:18:41 2012] Source does appear to be extended
[Wed Jun 13 10:18:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 11:24:40 2012] Using EEF radius (= 13.89 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 11:24:40 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 13 11:24:40 2012] Initial guess for spatial extent in simple fitting = 13.89"
[Wed Jun 13 11:24:40 2012] source mask rpix=3.2, npix_max = 54, mask sum = 64, frac = 1.174
[Wed Jun 13 11:24:40 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 13.89"
[Wed Jun 13 11:44:46 2012] fullrun_mos2_xmm0032141201_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jun 13 11:44:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0032141201_pi300-10000_cl_pass1_src1.csv
[Wed Jun 13 11:44:46 2012] fullrun_mos2_xmm0032141201_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jun 13 11:44:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0032141201_pi300-10000_cl_pass1_src1.csv
[Wed Jun 13 11:44:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0032141201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0032141201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 11:44:47 2012] fullrun_mos2_xmm0032141201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jun 13 11:44:47 2012] fullrun_mos2_xmm0032141201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jun 13 11:44:47 2012] Fit fullrun_mos2_xmm0032141201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jun 13 11:44:58 2012] Spatial fit model total counts = 2904.450000, observed total counts = 3226.000000
[Wed Jun 13 11:44:58 2012] Offset between fit and detection position for source 14 = 0.514053 pixels
[Wed Jun 13 11:44:58 2012] 2968.916000 total counts/ 192.616000 bgd. counts: snr = 200.041551
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.514053 pixels
  Position = (226.4, 106.2) = 13 5 33.09 -10 33 17.9
  Extent = 10.6 (10.6-10.6)", rotation angle = 0
  Source counts = 2776.3 +/- 54.5
  Background counts = 192.6
  Rate = 0.2 +/- 0.004
[Wed Jun 13 11:44:58 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 11:44:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 11:44:58 2012] Assessing source extent using major axis lower bound
[Wed Jun 13 11:44:58 2012] Source does appear to be extended
[Wed Jun 13 11:44:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 12:28:07 2012] Counts = 2776.300000, rescaling region sizes by 2.000000
[Wed Jun 13 12:28:07 2012] XMMSAS src. selection expression = ellipse(19650.553800, 9192.126200, 1270.728037, 1270.728037, 0.000000, X, Y)
[Wed Jun 13 12:28:07 2012] Writing source region out to fullrun_mos2_xmm0032141201_pi300-10000_pass1_cl_src14_src.reg
[Wed Jun 13 12:28:07 2012] Extracting stamp from image fullrun_mos2_xmm0032141201_pi300-10000_cl_sm2.00.img.gz, (153, 33) - (299, 179)
[Wed Jun 13 12:28:07 2012] XMMSAS bgd. selection expression = annulus(19650.553800, 9192.126200, 4235.760122, 8471.520244, X, Y) && !ellipse(20511.372600, 15747.616600, 564.421616, 337.629610, 0.000000, X, Y) && !ellipse(18297.760406, 9941.471870, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 13 12:28:07 2012] Writing fullrun_mos2_xmm0032141201_pi300-10000_pass1_cl_src14.gif
[Wed Jun 13 12:28:09 2012] Mean detx,y = (-11237.51, 11200.30) 
[Wed Jun 13 12:28:10 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 13 12:30:07 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 13 12:30:07 2012] Setting source spectrum file to fullrun_mos2_xmm0032141201_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Wed Jun 13 12:30:07 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0032141201_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Wed Jun 13 12:41:07 2012] Updating aperture counts using extracted products
[Wed Jun 13 12:41:07 2012] Error reading totcts from fullrun_mos2_xmm0032141201_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Wed Jun 13 12:41:07 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 13 12:41:07 2012] Using photon index=1.80, rate=0.205, arf fullrun_mos2_xmm0032141201_pi300-10000_pass1_cl_src14.arf
[Wed Jun 13 12:41:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 13 12:41:07 2012] Updating source flux to 5.2e-12
[Wed Jun 13 12:41:18 2012] Flag b found in src. 14 procflags, skipping spectral fitting
[Wed Jun 13 12:41:38 2012] Reading fit data from xmm0032141201/analysis//spectral/fullrun_mos2_xmm0032141201_pi300-10000_pass1_cl_src14_pl.csv
[Wed Jun 13 12:41:38 2012] Spectral fit parameter nH value = 2.38524e+13
[Wed Jun 13 12:41:38 2012] Spectral fit parameter PhoIndex value = 1.92582
[Wed Jun 13 12:41:38 2012] Failed to get F(0.3-8.0) from xmm0032141201/analysis//spectral/fullrun_mos2_xmm0032141201_pi300-10000_pass1_cl_src14_pl.csv, possibly due to different flux energy range selected
[Wed Jun 13 12:41:38 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 13 12:41:38 2012] Using Nh = 2.4e+13, photon index=1.93, rate=0.205, arf fullrun_mos2_xmm0032141201_pi300-10000_pass1_cl_src14.arf
[Wed Jun 13 12:41:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 13 12:41:38 2012] Updating source flux to 4.9e-12