[Wed Jun 13 08:55:16 2012] Detection parameters:
  Position = (215.3, 336.4) = 13 5 36.35 -10 16 35.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.2 +/- 10.3
  Background counts = 4.5
  Rate = 0.007 +/- 0.001

[Wed Jun 13 08:55:16 2012] Off-axis axis estimate = 6.62'
[Wed Jun 13 09:40:26 2012] Using EEF radius (= 9.74 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 09:40:26 2012] Initial guess for spatial extent in simple fitting = 9.74"
[Wed Jun 13 09:40:26 2012] source mask rpix=2.2, npix_max = 30, mask sum = 25, frac = 0.833
[Wed Jun 13 09:40:26 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 9.74"
[Wed Jun 13 09:55:55 2012] fullrun_mos1_xmm0032141201_pi300-10000_cl_pass0_src6.ximg exists
[Wed Jun 13 09:55:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0032141201_pi300-10000_cl_pass0_src6.csv
[Wed Jun 13 09:55:55 2012] fullrun_mos1_xmm0032141201_pi300-10000_cl_pass0_src6_1.ximg exists
[Wed Jun 13 09:55:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0032141201_pi300-10000_cl_pass0_src6.csv
[Wed Jun 13 09:55:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0032141201_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0032141201_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 09:55:55 2012] fullrun_mos1_xmm0032141201_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Wed Jun 13 09:55:55 2012] fullrun_mos1_xmm0032141201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Wed Jun 13 09:55:55 2012] Fit fullrun_mos1_xmm0032141201_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Wed Jun 13 10:18:39 2012] Spatial fit model total counts = 119.709000, observed total counts = 115.000000
[Wed Jun 13 10:18:39 2012] Offset between fit and detection position for source 6 = 0.236740 pixels
[Wed Jun 13 10:18:39 2012] 120.547400 total counts/ 79.087100 bgd. counts: snr = 4.662079
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.236740 pixels
  Position = (215.2, 336.6) = 13 5 36.38 -10 16 35.9
  Extent = 4.3 (3.4-5.6)", rotation angle = 0
  Source counts = 41.5 +/- 11.0
  Background counts = 79.1
  Rate = 0.003 +/- 0.0008
[Wed Jun 13 10:18:39 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 10:18:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 10:18:39 2012] Assessing source extent using major axis lower bound
[Wed Jun 13 10:18:39 2012] Source does appear to be extended
[Wed Jun 13 10:18:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 11:08:23 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 13 11:08:23 2012] Initial guess for spatial extent in simple fitting = 4.30"
[Wed Jun 13 11:08:23 2012] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.017
[Wed Jun 13 11:08:23 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 4.30"
[Wed Jun 13 11:24:39 2012] fullrun_mos1_xmm0032141201_pi300-10000_cl_pass1_src4.ximg exists
[Wed Jun 13 11:24:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0032141201_pi300-10000_cl_pass1_src4.csv
[Wed Jun 13 11:24:39 2012] fullrun_mos1_xmm0032141201_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed Jun 13 11:24:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0032141201_pi300-10000_cl_pass1_src4.csv
[Wed Jun 13 11:24:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0032141201_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0032141201_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 11:24:39 2012] fullrun_mos1_xmm0032141201_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed Jun 13 11:24:39 2012] fullrun_mos1_xmm0032141201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Jun 13 11:24:39 2012] Fit fullrun_mos1_xmm0032141201_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Wed Jun 13 11:44:55 2012] Spatial fit model total counts = 119.427000, observed total counts = 115.000000
[Wed Jun 13 11:44:55 2012] Offset between fit and detection position for source 6 = 0.001099 pixels
[Wed Jun 13 11:44:55 2012] 120.370200 total counts/ 78.886900 bgd. counts: snr = 4.670580
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.001099 pixels
  Position = (215.2, 336.6) = 13 5 36.38 -10 16 35.9
  Extent = 4.3 (3.4-5.6)", rotation angle = 0
  Source counts = 41.5 +/- 11.0
  Background counts = 78.9
  Rate = 0.003 +/- 0.0008
[Wed Jun 13 11:44:55 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 11:44:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 11:44:55 2012] Assessing source extent using major axis lower bound
[Wed Jun 13 11:44:55 2012] Source does appear to be extended
[Wed Jun 13 11:44:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 12:20:29 2012] XMMSAS src. selection expression = ellipse(18673.366360, 29232.210000, 257.751607, 257.751607, 0.000000, X, Y)
[Wed Jun 13 12:20:29 2012] Writing source region out to fullrun_mos1_xmm0032141201_pi300-10000_pass1_cl_src6_src.reg
[Wed Jun 13 12:20:29 2012] Extracting stamp from image fullrun_mos1_xmm0032141201_pi300-10000_cl_sm2.00.img.gz, (200, 322) - (230, 351)
[Wed Jun 13 12:20:29 2012] XMMSAS bgd. selection expression = annulus(18673.366360, 29232.210000, 429.586012, 859.172025, X, Y) && !ellipse(17952.159640, 30291.099800, 424.690412, 424.690412, 0.000000, X, Y)
[Wed Jun 13 12:20:29 2012] Writing fullrun_mos1_xmm0032141201_pi300-10000_pass1_cl_src6.gif
[Wed Jun 13 12:21:20 2012] Mean detx,y = (-7363.74, 3915.46) 
[Wed Jun 13 12:21:21 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 13 12:21:30 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 13 12:21:30 2012] Setting source spectrum file to fullrun_mos1_xmm0032141201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Jun 13 12:21:30 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0032141201_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Wed Jun 13 12:27:16 2012] Not generating rmf since there are only 41 counts
[Wed Jun 13 12:27:16 2012] rmf not generated due to insufficient counts
[Wed Jun 13 12:41:07 2012] Updating aperture counts using extracted products
[Wed Jun 13 12:41:07 2012] Error reading totcts from fullrun_mos1_xmm0032141201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Jun 13 12:41:07 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 13 12:41:07 2012] Using photon index=1.80, rate=0.00306, arf fullrun_mos1_xmm0032141201_pi300-10000_pass1_cl_src6.arf
[Wed Jun 13 12:41:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 13 12:41:07 2012] Updating source flux to 6.3e-14
[Wed Jun 13 12:41:09 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting