[Wed Jun 13 08:55:16 2012] Detection parameters:
  Position = (273.7, 242.6) = 13 5 19.14 -10 23 24.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 281.6 +/- 20.4
  Background counts = 5.4
  Rate = 0.02 +/- 0.002

[Wed Jun 13 08:55:16 2012] Off-axis axis estimate = 4.43'
[Wed Jun 13 09:40:26 2012] Using EEF radius (= 8.64 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 09:40:26 2012] Initial guess for spatial extent in simple fitting = 8.64"
[Wed Jun 13 09:40:26 2012] source mask rpix=2.0, npix_max = 24, mask sum = 24, frac = 0.970
[Wed Jun 13 09:40:26 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 8.64"
[Wed Jun 13 09:55:55 2012] fullrun_mos1_xmm0032141201_pi300-10000_cl_pass0_src2.ximg exists
[Wed Jun 13 09:55:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0032141201_pi300-10000_cl_pass0_src2.csv
[Wed Jun 13 09:55:55 2012] fullrun_mos1_xmm0032141201_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Jun 13 09:55:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0032141201_pi300-10000_cl_pass0_src2.csv
[Wed Jun 13 09:55:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0032141201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0032141201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 09:55:55 2012] fullrun_mos1_xmm0032141201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Jun 13 09:55:55 2012] fullrun_mos1_xmm0032141201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Jun 13 09:55:55 2012] Fit fullrun_mos1_xmm0032141201_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Wed Jun 13 10:18:39 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 11.495258 pixels away
[Wed Jun 13 10:18:39 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 10:18:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 10:18:39 2012] Assessing source extent using major
[Wed Jun 13 10:18:39 2012] Source does appear to be extended
[Wed Jun 13 10:18:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 11:08:23 2012] Using EEF radius (= 8.64 ")to estimate initial spatial extent for simple fitting
[Wed Jun 13 11:08:23 2012] Initial guess for spatial extent in simple fitting = 8.64"
[Wed Jun 13 11:08:23 2012] source mask rpix=2.0, npix_max = 24, mask sum = 24, frac = 0.970
[Wed Jun 13 11:08:23 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 8.64"
[Wed Jun 13 11:24:39 2012] fullrun_mos1_xmm0032141201_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jun 13 11:24:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0032141201_pi300-10000_cl_pass1_src1.csv
[Wed Jun 13 11:24:39 2012] fullrun_mos1_xmm0032141201_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jun 13 11:24:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0032141201_pi300-10000_cl_pass1_src1.csv
[Wed Jun 13 11:24:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0032141201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0032141201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 13 11:24:39 2012] fullrun_mos1_xmm0032141201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jun 13 11:24:39 2012] fullrun_mos1_xmm0032141201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jun 13 11:24:39 2012] Fit fullrun_mos1_xmm0032141201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jun 13 11:44:55 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 11.991870 pixels away
[Wed Jun 13 11:44:55 2012] Vigneting correction estimate = 1.000000
[Wed Jun 13 11:44:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 13 11:44:55 2012] Assessing source extent using major
[Wed Jun 13 11:44:55 2012] Source does appear to be extended
[Wed Jun 13 11:44:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 13 12:20:29 2012] XMMSAS src. selection expression = ellipse(23763.116974, 21060.573273, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 13 12:20:29 2012] Writing source region out to fullrun_mos1_xmm0032141201_pi300-10000_pass1_cl_src10_src.reg
[Wed Jun 13 12:20:29 2012] Extracting stamp from image fullrun_mos1_xmm0032141201_pi300-10000_cl_sm2.00.img.gz, (236, 205) - (311, 280)
[Wed Jun 13 12:20:29 2012] XMMSAS bgd. selection expression = annulus(23763.116974, 21060.573273, 1087.500000, 2175.000000, X, Y) && !ellipse(24937.055400, 21290.239800, 717.920021, 717.920021, 0.000000, X, Y)
[Wed Jun 13 12:20:29 2012] Writing fullrun_mos1_xmm0032141201_pi300-10000_pass1_cl_src10.gif
[Wed Jun 13 12:20:30 2012] Mean detx,y = (2157.40, 2557.06) 
[Wed Jun 13 12:20:31 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 13 12:20:43 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 13 12:20:43 2012] Setting source spectrum file to fullrun_mos1_xmm0032141201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Jun 13 12:20:43 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0032141201_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Wed Jun 13 12:23:51 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 13 12:23:51 2012] rmf not generated due to insufficient counts
[Wed Jun 13 12:41:07 2012] Updating aperture counts using extracted products
[Wed Jun 13 12:41:07 2012] Error reading totcts from fullrun_mos1_xmm0032141201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Jun 13 12:41:07 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 13 12:41:07 2012] Using photon index=1.80, rate=0.0226, arf fullrun_mos1_xmm0032141201_pi300-10000_pass1_cl_src10.arf
[Wed Jun 13 12:41:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 13 12:41:07 2012] Updating source flux to 2.4e-13
[Wed Jun 13 12:41:09 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Jun 13 12:41:18 2012] xmm0032141201/analysis//spectral/fullrun_mos1_xmm0032141201_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete