[Wed Jun 27 10:11:08 2012] Detection parameters:
  Position = (402.8, 404.0) = 6 45 56.50 -44 23 11.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 67.2 +/- 10.7
  Background counts = 6.3
  Rate = 0.007 +/- 0.001

[Wed Jun 27 10:11:09 2012] Off-axis axis estimate = 10.76'
[Wed Jun 27 10:13:18 2012] Using EEF radius (= 11.81 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 10:13:18 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 27 10:13:18 2012] Initial guess for spatial extent in simple fitting = 11.81"
[Wed Jun 27 10:13:18 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.871
[Wed Jun 27 10:13:18 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 11.81"
[Wed Jun 27 10:56:39 2012] fullrun_pn_xmm0032140501_pi300-10000_cl_pass0_src2.ximg exists
[Wed Jun 27 10:56:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0032140501_pi300-10000_cl_pass0_src2.csv
[Wed Jun 27 10:56:39 2012] fullrun_pn_xmm0032140501_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Jun 27 10:56:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0032140501_pi300-10000_cl_pass0_src2.csv
[Wed Jun 27 10:56:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0032140501_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0032140501_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 10:56:40 2012] fullrun_pn_xmm0032140501_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Jun 27 10:56:40 2012] fullrun_pn_xmm0032140501_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Jun 27 10:56:40 2012] Fit fullrun_pn_xmm0032140501_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Wed Jun 27 11:56:07 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 15.953934 pixels away
[Wed Jun 27 11:56:07 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 11:56:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 11:56:07 2012] Assessing source extent using major
[Wed Jun 27 11:56:07 2012] Source does appear to be extended
[Wed Jun 27 11:56:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 11:56:21 2012] Using EEF radius (= 11.81 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 11:56:21 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 27 11:56:21 2012] Initial guess for spatial extent in simple fitting = 11.81"
[Wed Jun 27 11:56:21 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.871
[Wed Jun 27 11:56:21 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 11.81"
[Wed Jun 27 12:37:37 2012] fullrun_pn_xmm0032140501_pi300-10000_cl_pass1_src2.ximg exists
[Wed Jun 27 12:37:37 2012] fullrun_pn_xmm0032140501_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed Jun 27 12:37:37 2012] Fit fullrun_pn_xmm0032140501_pi300-10000_cl_pass1_src2 appears to have run properly
[Wed Jun 27 12:37:37 2012] fullrun_pn_xmm0032140501_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed Jun 27 12:37:37 2012] fullrun_pn_xmm0032140501_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Jun 27 12:37:37 2012] Fit fullrun_pn_xmm0032140501_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Wed Jun 27 13:33:43 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 15.246921 pixels away
[Wed Jun 27 13:33:43 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 13:33:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 13:33:43 2012] Assessing source extent using major
[Wed Jun 27 13:33:43 2012] Source does appear to be extended
[Wed Jun 27 13:33:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 13:33:57 2012] XMMSAS src. selection expression = ellipse(34998.035400, 35098.820312, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jun 27 13:33:57 2012] Writing source region out to fullrun_pn_xmm0032140501_pi300-10000_pass1_cl_src3_src.reg
[Wed Jun 27 13:33:57 2012] Extracting stamp from image fullrun_pn_xmm0032140501_pi300-10000_cl_sm2.00.img.gz, (365, 366) - (440, 441)
[Wed Jun 27 13:33:57 2012] XMMSAS bgd. selection expression = annulus(34998.035400, 35098.820312, 1087.500000, 2175.000000, X, Y)
[Wed Jun 27 13:33:57 2012] Writing fullrun_pn_xmm0032140501_pi300-10000_pass1_cl_src3.gif
[Wed Jun 27 13:35:10 2012] Mean detx,y = (-12169.24, 8068.39) 
[Wed Jun 27 13:35:12 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 27 13:35:36 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 27 13:35:36 2012] Setting source spectrum file to fullrun_pn_xmm0032140501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Jun 27 13:35:36 2012] Setting bgd. spectrum file to fullrun_pn_xmm0032140501_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Jun 27 13:50:49 2012] Not generating rmf since there are only 67 counts
[Wed Jun 27 13:50:49 2012] rmf not generated due to insufficient counts
[Wed Jun 27 14:13:09 2012] Updating aperture counts using extracted products
[Wed Jun 27 14:13:09 2012] Error reading totcts from fullrun_pn_xmm0032140501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Jun 27 14:13:10 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 27 14:13:10 2012] Using photon index=1.80, rate=0.00674, arf fullrun_pn_xmm0032140501_pi300-10000_pass1_cl_src3.arf
[Wed Jun 27 14:13:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 27 14:13:10 2012] Updating source flux to 4.8e-14
[Wed Jun 27 14:13:22 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting