[Wed Jun 27 10:11:09 2012] Detection parameters:
  Position = (290.8, 100.8) = 6 46 41.97 -44 45 12.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 61.7 +/- 10.4
  Background counts = 6.8
  Rate = 0.006 +/- 0.001

[Wed Jun 27 10:11:09 2012] Off-axis axis estimate = 14.34'
[Wed Jun 27 10:13:18 2012] Using EEF radius (= 13.60 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 10:13:18 2012] Initial guess for spatial extent in simple fitting = 13.60"
[Wed Jun 27 10:13:18 2012] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.932
[Wed Jun 27 10:13:18 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 13.60"
[Wed Jun 27 10:56:40 2012] fullrun_pn_xmm0032140501_pi300-10000_cl_pass0_src25.ximg exists
[Wed Jun 27 10:56:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0032140501_pi300-10000_cl_pass0_src25.csv
[Wed Jun 27 10:56:40 2012] fullrun_pn_xmm0032140501_pi300-10000_cl_pass0_src25_1.ximg exists
[Wed Jun 27 10:56:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0032140501_pi300-10000_cl_pass0_src25.csv
[Wed Jun 27 10:56:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0032140501_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0032140501_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 10:56:40 2012] fullrun_pn_xmm0032140501_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Wed Jun 27 10:56:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0032140501_pi300-10000_cl_pass0_tfrozen_src25.csv
[Wed Jun 27 10:56:40 2012] fullrun_pn_xmm0032140501_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Wed Jun 27 10:56:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0032140501_pi300-10000_cl_pass0_tfrozen_src25.csv
[Wed Jun 27 10:56:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0032140501_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0032140501_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 11:56:07 2012] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 18.378118 pixels away
[Wed Jun 27 11:56:07 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 11:56:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 11:56:07 2012] Assessing source extent using major
[Wed Jun 27 11:56:07 2012] Source does appear to be extended
[Wed Jun 27 11:56:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 11:56:21 2012] Using EEF radius (= 13.60 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 11:56:21 2012] Initial guess for spatial extent in simple fitting = 13.60"
[Wed Jun 27 11:56:21 2012] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.932
[Wed Jun 27 11:56:21 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 13.60"
[Wed Jun 27 12:37:37 2012] fullrun_pn_xmm0032140501_pi300-10000_cl_pass1_src25.ximg exists
[Wed Jun 27 12:37:37 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0032140501_pi300-10000_cl_pass1_src25.csv
[Wed Jun 27 12:37:37 2012] fullrun_pn_xmm0032140501_pi300-10000_cl_pass1_src25_1.ximg exists
[Wed Jun 27 12:37:37 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0032140501_pi300-10000_cl_pass1_src25.csv
[Wed Jun 27 12:37:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0032140501_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0032140501_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 12:37:38 2012] fullrun_pn_xmm0032140501_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Wed Jun 27 12:37:38 2012] fullrun_pn_xmm0032140501_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Wed Jun 27 12:37:38 2012] Fit fullrun_pn_xmm0032140501_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Wed Jun 27 13:33:43 2012] Spatial fit model total counts = 138.020000, observed total counts = 127.000000
[Wed Jun 27 13:33:43 2012] Offset between fit and detection position for source 27 = 0.372998 pixels
[Wed Jun 27 13:33:43 2012] 139.910200 total counts/ 77.325400 bgd. counts: snr = 7.117177
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.372998 pixels
  Position = (290.7, 100.5) = 6 46 42.02 -44 45 13.6
  Extent = 9.7 (7.3-12.5)", rotation angle = 0
  Source counts = 62.6 +/- 11.8
  Background counts = 77.3
  Rate = 0.006 +/- 0.001
[Wed Jun 27 13:33:43 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 13:33:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 13:33:43 2012] Assessing source extent using major axis lower bound
[Wed Jun 27 13:33:43 2012] Source does appear to be extended
[Wed Jun 27 13:33:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 13:33:58 2012] XMMSAS src. selection expression = ellipse(25244.619720, 8694.162600, 582.430817, 582.430817, 0.000000, X, Y)
[Wed Jun 27 13:33:58 2012] Writing source region out to fullrun_pn_xmm0032140501_pi300-10000_pass1_cl_src27_src.reg
[Wed Jun 27 13:33:58 2012] Extracting stamp from image fullrun_pn_xmm0032140501_pi300-10000_cl_sm2.00.img.gz, (257, 67) - (324, 134)
[Wed Jun 27 13:33:58 2012] XMMSAS bgd. selection expression = annulus(25244.619720, 8694.162600, 970.718028, 1941.436056, X, Y)
[Wed Jun 27 13:33:58 2012] Writing fullrun_pn_xmm0032140501_pi300-10000_pass1_cl_src27.gif
[Wed Jun 27 13:47:28 2012] Mean detx,y = (3876.58, -15031.80) 
[Wed Jun 27 13:47:31 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 27 13:47:57 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 27 13:47:57 2012] Setting source spectrum file to fullrun_pn_xmm0032140501_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Wed Jun 27 13:47:57 2012] Setting bgd. spectrum file to fullrun_pn_xmm0032140501_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Wed Jun 27 13:57:00 2012] Not generating rmf since there are only 62 counts
[Wed Jun 27 13:57:00 2012] rmf not generated due to insufficient counts
[Wed Jun 27 14:13:09 2012] Updating aperture counts using extracted products
[Wed Jun 27 14:13:09 2012] Error reading totcts from fullrun_pn_xmm0032140501_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Wed Jun 27 14:13:10 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 27 14:13:10 2012] Using photon index=1.80, rate=0.00628, arf fullrun_pn_xmm0032140501_pi300-10000_pass1_cl_src27.arf
[Wed Jun 27 14:13:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 27 14:13:10 2012] Updating source flux to 4.6e-14
[Wed Jun 27 14:13:22 2012] Source 27 has fewer than 100.000000 counts, skipping spectral fitting