[Wed Jun 27 10:11:08 2012] Detection parameters:
  Position = (294.3, 339.1) = 6 46 40.57 -44 27 54.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 23.9 +/- 7.1
  Background counts = 7.6
  Rate = 0.003 +/- 0.001

[Wed Jun 27 10:11:09 2012] Off-axis axis estimate = 2.97'
[Wed Jun 27 10:13:18 2012] Using EEF radius (= 7.91 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 10:13:18 2012] Initial guess for spatial extent in simple fitting = 7.91"
[Wed Jun 27 10:13:18 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.930
[Wed Jun 27 10:13:18 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 7.91"
[Wed Jun 27 10:56:39 2012] fullrun_pn_xmm0032140501_pi300-10000_cl_pass0_src8.ximg exists
[Wed Jun 27 10:56:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0032140501_pi300-10000_cl_pass0_src8.csv
[Wed Jun 27 10:56:39 2012] fullrun_pn_xmm0032140501_pi300-10000_cl_pass0_src8_1.ximg exists
[Wed Jun 27 10:56:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0032140501_pi300-10000_cl_pass0_src8.csv
[Wed Jun 27 10:56:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0032140501_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0032140501_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 10:56:40 2012] fullrun_pn_xmm0032140501_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Wed Jun 27 10:56:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0032140501_pi300-10000_cl_pass0_tfrozen_src8.csv
[Wed Jun 27 10:56:40 2012] fullrun_pn_xmm0032140501_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Wed Jun 27 10:56:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0032140501_pi300-10000_cl_pass0_tfrozen_src8.csv
[Wed Jun 27 10:56:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0032140501_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0032140501_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 11:56:07 2012] Source 10 is offset by -7.011531 and 4.544127 pixels which is larger than
2 X fitted extent = 1.502579 x 1.502579, not incorporating fit results
[Wed Jun 27 11:56:07 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 11:56:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 11:56:07 2012] Assessing source extent using major
[Wed Jun 27 11:56:07 2012] Source does appear to be extended
[Wed Jun 27 11:56:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 11:56:21 2012] Using EEF radius (= 7.91 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 11:56:21 2012] Initial guess for spatial extent in simple fitting = 7.91"
[Wed Jun 27 11:56:21 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.930
[Wed Jun 27 11:56:21 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 7.91"
[Wed Jun 27 12:37:37 2012] fullrun_pn_xmm0032140501_pi300-10000_cl_pass1_src8.ximg exists
[Wed Jun 27 12:37:37 2012] fullrun_pn_xmm0032140501_pi300-10000_cl_pass1_src8_1.ximg exists
[Wed Jun 27 12:37:37 2012] Fit fullrun_pn_xmm0032140501_pi300-10000_cl_pass1_src8 appears to have run properly
[Wed Jun 27 12:37:38 2012] fullrun_pn_xmm0032140501_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Wed Jun 27 12:37:38 2012] fullrun_pn_xmm0032140501_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Wed Jun 27 12:37:38 2012] Fit fullrun_pn_xmm0032140501_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Wed Jun 27 13:33:43 2012] Spatial fit model total counts = 108.189000, observed total counts = 102.000000
[Wed Jun 27 13:33:43 2012] Offset between fit and detection position for source 10 = 0.925696 pixels
[Wed Jun 27 13:33:43 2012] 107.032400 total counts/ 87.602300 bgd. counts: snr = 2.075952
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.925696 pixels
  Position = (293.3, 339.0) = 6 46 40.94 -44 27 56.0
  Extent = 6.5 (2.7-11.0)", rotation angle = 0
  Source counts = 19.4 +/- 10.3
  Background counts = 87.6
  Rate = 0.002 +/- 0.001
[Wed Jun 27 13:33:43 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 13:33:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 13:33:43 2012] Assessing source extent using major axis lower bound
[Wed Jun 27 13:33:43 2012] Source does appear to be extended
[Wed Jun 27 13:33:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 13:33:57 2012] XMMSAS src. selection expression = ellipse(25471.481200, 29446.214600, 391.548611, 391.548611, 0.000000, X, Y)
[Wed Jun 27 13:33:57 2012] Writing source region out to fullrun_pn_xmm0032140501_pi300-10000_pass1_cl_src10_src.reg
[Wed Jun 27 13:33:57 2012] Extracting stamp from image fullrun_pn_xmm0032140501_pi300-10000_cl_sm2.00.img.gz, (271, 317) - (316, 362)
[Wed Jun 27 13:33:57 2012] XMMSAS bgd. selection expression = annulus(25471.481200, 29446.214600, 652.581019, 1305.162038, X, Y) && !ellipse(25570.426200, 28513.645000, 339.600810, 339.600810, 0.000000, X, Y)
[Wed Jun 27 13:33:57 2012] Writing fullrun_pn_xmm0032140501_pi300-10000_pass1_cl_src10.gif
[Wed Jun 27 13:38:45 2012] Mean detx,y = (-1504.05, 5002.07) 
[Wed Jun 27 13:38:47 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 27 13:39:06 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 27 13:39:07 2012] Setting source spectrum file to fullrun_pn_xmm0032140501_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Jun 27 13:39:07 2012] Setting bgd. spectrum file to fullrun_pn_xmm0032140501_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Wed Jun 27 13:54:21 2012] Not generating rmf since there are only 19 counts
[Wed Jun 27 13:54:21 2012] rmf not generated due to insufficient counts
[Wed Jun 27 14:13:09 2012] Updating aperture counts using extracted products
[Wed Jun 27 14:13:09 2012] Error reading totcts from fullrun_pn_xmm0032140501_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Jun 27 14:13:10 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 27 14:13:10 2012] Using photon index=1.80, rate=0.00195, arf fullrun_pn_xmm0032140501_pi300-10000_pass1_cl_src10.arf
[Wed Jun 27 14:13:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 27 14:13:10 2012] Updating source flux to 7.2e-15
[Wed Jun 27 14:13:22 2012] Flag b found in src. 10 procflags, skipping spectral fitting
[Wed Jun 27 14:13:22 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting