[Wed Jun 27 10:11:08 2012] Detection parameters:
  Position = (280.3, 163.9) = 6 46 46.27 -44 40 36.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 238.6 +/- 17.9
  Background counts = 6.7
  Rate = 0.02 +/- 0.002

[Wed Jun 27 10:11:09 2012] Off-axis axis estimate = 9.85'
[Wed Jun 27 10:13:18 2012] Using EEF radius (= 11.35 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 10:13:18 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 27 10:13:18 2012] Initial guess for spatial extent in simple fitting = 11.35"
[Wed Jun 27 10:13:18 2012] source mask rpix=2.6, npix_max = 38, mask sum = 24, frac = 0.621
[Wed Jun 27 10:13:18 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.35"
[Wed Jun 27 10:56:39 2012] fullrun_pn_xmm0032140501_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jun 27 10:56:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0032140501_pi300-10000_cl_pass0_src1.csv
[Wed Jun 27 10:56:39 2012] fullrun_pn_xmm0032140501_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jun 27 10:56:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0032140501_pi300-10000_cl_pass0_src1.csv
[Wed Jun 27 10:56:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0032140501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0032140501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 10:56:40 2012] fullrun_pn_xmm0032140501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jun 27 10:56:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0032140501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Jun 27 10:56:40 2012] fullrun_pn_xmm0032140501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jun 27 10:56:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0032140501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Jun 27 10:56:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0032140501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0032140501_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 11:56:07 2012] Spatial fit model total counts = 426.743000, observed total counts = 351.000000
[Wed Jun 27 11:56:07 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 27 11:56:07 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 11:56:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 11:56:07 2012] Assessing source extent using major
[Wed Jun 27 11:56:07 2012] Source does appear to be extended
[Wed Jun 27 11:56:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 11:56:07 2012] Source is confused with source 26
[Wed Jun 27 11:56:21 2012] Using EEF radius (= 11.35 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 11:56:21 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 27 11:56:21 2012] Initial guess for spatial extent in simple fitting = 11.35"
[Wed Jun 27 11:56:21 2012] source mask rpix=2.6, npix_max = 38, mask sum = 24, frac = 0.621
[Wed Jun 27 11:56:21 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 11.35"
[Wed Jun 27 12:37:37 2012] fullrun_pn_xmm0032140501_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jun 27 12:37:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0032140501_pi300-10000_cl_pass1_src1.csv
[Wed Jun 27 12:37:37 2012] fullrun_pn_xmm0032140501_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jun 27 12:37:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0032140501_pi300-10000_cl_pass1_src1.csv
[Wed Jun 27 12:37:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0032140501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0032140501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 12:37:37 2012] fullrun_pn_xmm0032140501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jun 27 12:37:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0032140501_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed Jun 27 12:37:37 2012] fullrun_pn_xmm0032140501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jun 27 12:37:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0032140501_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed Jun 27 12:37:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0032140501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0032140501_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 13:33:43 2012] Spatial fit model total counts = 427.024000, observed total counts = 351.000000
[Wed Jun 27 13:33:43 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 27 13:33:43 2012] Spatial fit model total counts = 296.933000, observed total counts = 295.000000
[Wed Jun 27 13:33:43 2012] Offset between fit and detection position for source 1 = 0.653981 pixels
[Wed Jun 27 13:33:43 2012] Warning, changing simple spatial fit ID from 1 to 24
[Wed Jun 27 13:33:43 2012] 292.782000 total counts/ 164.430000 bgd. counts: snr = 10.009494
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.653981 pixels
  Position = (279.7, 164.1) = 6 46 46.51 -44 40 36.7
  Extent = 5.1 (4.0-6.7)", rotation angle = 0
  Source counts = 128.4 +/- 17.1
  Background counts = 164.4
  Rate = 0.01 +/- 0.002
[Wed Jun 27 13:33:43 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 13:33:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 13:33:43 2012] Assessing source extent using major axis lower bound
[Wed Jun 27 13:33:43 2012] Source does appear to be extended
[Wed Jun 27 13:33:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 13:33:57 2012] XMMSAS src. selection expression = ellipse(24285.226000, 14230.209800, 305.909409, 305.909409, 0.000000, X, Y)
[Wed Jun 27 13:33:57 2012] Writing source region out to fullrun_pn_xmm0032140501_pi300-10000_pass1_cl_src1_src.reg
[Wed Jun 27 13:33:57 2012] Extracting stamp from image fullrun_pn_xmm0032140501_pi300-10000_cl_sm2.00.img.gz, (262, 147) - (297, 182)
[Wed Jun 27 13:33:57 2012] XMMSAS bgd. selection expression = annulus(24285.226000, 14230.209800, 509.849015, 1019.698029, X, Y) && !ellipse(23719.470947, 14057.036102, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 27 13:33:57 2012] Writing fullrun_pn_xmm0032140501_pi300-10000_pass1_cl_src1.gif
[Wed Jun 27 13:34:04 2012] Mean detx,y = (3464.78, -9432.12) 
[Wed Jun 27 13:34:06 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 27 13:34:24 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 27 13:34:25 2012] Setting source spectrum file to fullrun_pn_xmm0032140501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jun 27 13:34:25 2012] Setting bgd. spectrum file to fullrun_pn_xmm0032140501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jun 27 14:13:09 2012] Updating aperture counts using extracted products
[Wed Jun 27 14:13:09 2012] Error reading totcts from fullrun_pn_xmm0032140501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jun 27 14:13:09 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 27 14:13:09 2012] Using photon index=1.80, rate=0.0129, arf fullrun_pn_xmm0032140501_pi300-10000_pass1_cl_src1.arf
[Wed Jun 27 14:13:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 27 14:13:10 2012] Updating source flux to 1.6e-13
[Wed Jun 27 14:13:22 2012] Flag p found in src. 1 procflags, skipping spectral fitting
[Wed Jun 27 14:13:22 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Wed Jun 27 14:13:35 2012] Reading fit data from xmm0032140501/analysis//spectral/fullrun_pn_xmm0032140501_pi300-10000_pass1_cl_src1_pl.csv
[Wed Jun 27 14:13:35 2012] Spectral fit parameter nH value = 7.31577e+21
[Wed Jun 27 14:13:35 2012] Spectral fit parameter PhoIndex value = 7.68865
[Wed Jun 27 14:13:35 2012] Failed to get F(0.3-8.0) from xmm0032140501/analysis//spectral/fullrun_pn_xmm0032140501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Jun 27 14:13:35 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 27 14:13:35 2012] Using Nh = 7.3e+21, photon index=7.69, rate=0.0129, arf fullrun_pn_xmm0032140501_pi300-10000_pass1_cl_src1.arf
[Wed Jun 27 14:13:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 27 14:13:35 2012] Updating source flux to 8.8e-14