[Wed Jun 27 10:12:10 2012] Detection parameters:
  Position = (297.4, 354.1) = 6 46 39.29 -44 26 49.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 24.4 +/- 6.2
  Background counts = 2.9
  Rate = 0.003 +/- 0.0007

[Wed Jun 27 10:12:11 2012] Off-axis axis estimate = 4.04'
[Wed Jun 27 11:28:11 2012] Using EEF radius (= 8.45 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 11:28:11 2012] Initial guess for spatial extent in simple fitting = 8.45"
[Wed Jun 27 11:28:11 2012] source mask rpix=1.9, npix_max = 23, mask sum = 22, frac = 0.922
[Wed Jun 27 11:28:11 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 8.45"
[Wed Jun 27 11:56:01 2012] fullrun_mos2_xmm0032140501_pi300-10000_cl_pass0_src15.ximg exists
[Wed Jun 27 11:56:01 2012] fullrun_mos2_xmm0032140501_pi300-10000_cl_pass0_src15_1.ximg exists
[Wed Jun 27 11:56:01 2012] Fit fullrun_mos2_xmm0032140501_pi300-10000_cl_pass0_src15 appears to have run properly
[Wed Jun 27 11:56:01 2012] fullrun_mos2_xmm0032140501_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Wed Jun 27 11:56:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0032140501_pi300-10000_cl_pass0_tfrozen_src15.csv
[Wed Jun 27 11:56:02 2012] fullrun_mos2_xmm0032140501_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Wed Jun 27 11:56:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0032140501_pi300-10000_cl_pass0_tfrozen_src15.csv
[Wed Jun 27 11:56:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0032140501_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0032140501_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 11:56:14 2012] Spatial fit model total counts = 52.161500, observed total counts = 53.000000
[Wed Jun 27 11:56:14 2012] Offset between fit and detection position for source 4 = 0.634619 pixels
[Wed Jun 27 11:56:14 2012] 52.565900 total counts/ 31.585500 bgd. counts: snr = 3.733102
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.634619 pixels
  Position = (296.9, 353.7) = 6 46 39.49 -44 26 52.1
  Extent = 6.4 (3.1-10.3)", rotation angle = 18 (315-0) degrees
  Source counts = 21.0 +/- 7.3
  Background counts = 31.6
  Rate = 0.002 +/- 0.0006
[Wed Jun 27 11:56:14 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 11:56:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 11:56:14 2012] Assessing source extent using major axis lower bound
[Wed Jun 27 11:56:14 2012] Source does appear to be extended
[Wed Jun 27 11:56:14 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.46
[Wed Jun 27 13:04:01 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 27 13:04:01 2012] Initial guess for spatial extent in simple fitting = 4.98"
[Wed Jun 27 13:04:01 2012] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.107
[Wed Jun 27 13:04:01 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 4.98"
[Wed Jun 27 13:33:37 2012] fullrun_mos2_xmm0032140501_pi300-10000_cl_pass1_src15.ximg exists
[Wed Jun 27 13:33:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0032140501_pi300-10000_cl_pass1_src15.csv
[Wed Jun 27 13:33:37 2012] fullrun_mos2_xmm0032140501_pi300-10000_cl_pass1_src15_1.ximg exists
[Wed Jun 27 13:33:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0032140501_pi300-10000_cl_pass1_src15.csv
[Wed Jun 27 13:33:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0032140501_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0032140501_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 13:33:37 2012] fullrun_mos2_xmm0032140501_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Wed Jun 27 13:33:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0032140501_pi300-10000_cl_pass1_tfrozen_src15.csv
[Wed Jun 27 13:33:37 2012] fullrun_mos2_xmm0032140501_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Wed Jun 27 13:33:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0032140501_pi300-10000_cl_pass1_tfrozen_src15.csv
[Wed Jun 27 13:33:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0032140501_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0032140501_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 13:33:49 2012] Warning, spatial fit 15 centroid is now closest to src. 12
[Wed Jun 27 13:33:49 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 13:33:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 13:33:49 2012] Assessing source extent using major axis lower bound
[Wed Jun 27 13:33:49 2012] Source does appear to be extended
[Wed Jun 27 13:33:49 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.46
[Wed Jun 27 14:03:45 2012] XMMSAS src. selection expression = ellipse(25782.128700, 30723.588200, 384.950411, 213.192606, 17.931132, X, Y)
[Wed Jun 27 14:03:45 2012] Writing source region out to fullrun_mos2_xmm0032140501_pi300-10000_pass1_cl_src4_src.reg
[Wed Jun 27 14:03:45 2012] Extracting stamp from image fullrun_mos2_xmm0032140501_pi300-10000_cl_sm2.00.img.gz, (275, 332) - (319, 376)
[Wed Jun 27 14:03:45 2012] XMMSAS bgd. selection expression = annulus(25782.128700, 30723.588200, 641.584018, 1283.168037, X, Y)
[Wed Jun 27 14:03:45 2012] Writing fullrun_mos2_xmm0032140501_pi300-10000_pass1_cl_src4.gif
[Wed Jun 27 14:06:39 2012] Mean detx,y = (2262.68, -6357.14) 
[Wed Jun 27 14:06:40 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 27 14:06:55 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 27 14:06:55 2012] Setting source spectrum file to fullrun_mos2_xmm0032140501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Jun 27 14:06:55 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0032140501_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed Jun 27 14:12:33 2012] Not generating rmf since there are only 20 counts
[Wed Jun 27 14:12:33 2012] rmf not generated due to insufficient counts
[Wed Jun 27 14:13:11 2012] Updating aperture counts using extracted products
[Wed Jun 27 14:13:11 2012] Error reading totcts from fullrun_mos2_xmm0032140501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Jun 27 14:13:11 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 27 14:13:11 2012] Using photon index=1.80, rate=0.00167, arf fullrun_mos2_xmm0032140501_pi300-10000_pass1_cl_src4.arf
[Wed Jun 27 14:13:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 27 14:13:11 2012] Updating source flux to 3.1e-14
[Wed Jun 27 14:13:13 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting