[Wed Jun 27 10:12:11 2012] Detection parameters:
  Position = (275.2, 455.3) = 6 46 48.29 -44 19 28.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 77.6 +/- 10.9
  Background counts = 3.0
  Rate = 0.006 +/- 0.0009

[Wed Jun 27 10:12:11 2012] Off-axis axis estimate = 11.49'
[Wed Jun 27 11:28:11 2012] Using EEF radius (= 12.18 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 11:28:11 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 27 11:28:11 2012] Initial guess for spatial extent in simple fitting = 12.18"
[Wed Jun 27 11:28:11 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.965
[Wed Jun 27 11:28:11 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 12.18"
[Wed Jun 27 11:56:01 2012] fullrun_mos2_xmm0032140501_pi300-10000_cl_pass0_src7.ximg exists
[Wed Jun 27 11:56:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0032140501_pi300-10000_cl_pass0_src7.csv
[Wed Jun 27 11:56:01 2012] fullrun_mos2_xmm0032140501_pi300-10000_cl_pass0_src7_1.ximg exists
[Wed Jun 27 11:56:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0032140501_pi300-10000_cl_pass0_src7.csv
[Wed Jun 27 11:56:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0032140501_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0032140501_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 11:56:01 2012] fullrun_mos2_xmm0032140501_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Wed Jun 27 11:56:01 2012] fullrun_mos2_xmm0032140501_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Wed Jun 27 11:56:01 2012] Fit fullrun_mos2_xmm0032140501_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Wed Jun 27 11:56:14 2012] Spatial fit model total counts = 97.645900, observed total counts = 97.000000
[Wed Jun 27 11:56:14 2012] Offset between fit and detection position for source 19 = 0.563918 pixels
[Wed Jun 27 11:56:14 2012] 97.632700 total counts/ 41.957000 bgd. counts: snr = 8.595348
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.563918 pixels
  Position = (274.6, 455.3) = 6 46 48.52 -44 19 30.0
  Extent = 6.1 (4.9-7.5)", rotation angle = 0
  Source counts = 55.7 +/- 9.9
  Background counts = 42.0
  Rate = 0.004 +/- 0.0008
[Wed Jun 27 11:56:14 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 11:56:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 11:56:14 2012] Assessing source extent using major axis lower bound
[Wed Jun 27 11:56:14 2012] Source does appear to be extended
[Wed Jun 27 11:56:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 13:04:01 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 27 13:04:01 2012] Initial guess for spatial extent in simple fitting = 6.10"
[Wed Jun 27 13:04:01 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.105
[Wed Jun 27 13:04:01 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 6.10"
[Wed Jun 27 13:33:37 2012] fullrun_mos2_xmm0032140501_pi300-10000_cl_pass1_src7.ximg exists
[Wed Jun 27 13:33:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0032140501_pi300-10000_cl_pass1_src7.csv
[Wed Jun 27 13:33:37 2012] fullrun_mos2_xmm0032140501_pi300-10000_cl_pass1_src7_1.ximg exists
[Wed Jun 27 13:33:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0032140501_pi300-10000_cl_pass1_src7.csv
[Wed Jun 27 13:33:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0032140501_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0032140501_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 13:33:37 2012] fullrun_mos2_xmm0032140501_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Wed Jun 27 13:33:37 2012] fullrun_mos2_xmm0032140501_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Wed Jun 27 13:33:37 2012] Fit fullrun_mos2_xmm0032140501_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Wed Jun 27 13:33:49 2012] Spatial fit model total counts = 91.598600, observed total counts = 91.000000
[Wed Jun 27 13:33:49 2012] Offset between fit and detection position for source 19 = 0.008123 pixels
[Wed Jun 27 13:33:49 2012] 91.705300 total counts/ 35.819000 bgd. counts: snr = 9.337887
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.008123 pixels
  Position = (274.6, 455.3) = 6 46 48.52 -44 19 30.0
  Extent = 6.1 (4.9-7.5)", rotation angle = 0
  Source counts = 55.9 +/- 9.6
  Background counts = 35.8
  Rate = 0.004 +/- 0.0008
[Wed Jun 27 13:33:49 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 13:33:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 13:33:49 2012] Assessing source extent using major axis lower bound
[Wed Jun 27 13:33:49 2012] Source does appear to be extended
[Wed Jun 27 13:33:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 14:03:45 2012] XMMSAS src. selection expression = ellipse(23845.026400, 39564.528800, 366.706811, 366.706811, 0.000000, X, Y)
[Wed Jun 27 14:03:45 2012] Writing source region out to fullrun_mos2_xmm0032140501_pi300-10000_pass1_cl_src19_src.reg
[Wed Jun 27 14:03:45 2012] Extracting stamp from image fullrun_mos2_xmm0032140501_pi300-10000_cl_sm2.00.img.gz, (254, 434) - (296, 476)
[Wed Jun 27 14:03:45 2012] XMMSAS bgd. selection expression = annulus(23845.026400, 39564.528800, 611.178018, 1222.356035, X, Y)
[Wed Jun 27 14:03:45 2012] Writing fullrun_mos2_xmm0032140501_pi300-10000_pass1_cl_src19.gif
[Wed Jun 27 14:05:07 2012] Mean detx,y = (2467.66, -15364.84) 
[Wed Jun 27 14:05:08 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 27 14:05:15 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 27 14:05:15 2012] Setting source spectrum file to fullrun_mos2_xmm0032140501_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Wed Jun 27 14:05:15 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0032140501_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Wed Jun 27 14:11:56 2012] Not generating rmf since there are only 55 counts
[Wed Jun 27 14:11:56 2012] rmf not generated due to insufficient counts
[Wed Jun 27 14:13:11 2012] Updating aperture counts using extracted products
[Wed Jun 27 14:13:11 2012] Error reading totcts from fullrun_mos2_xmm0032140501_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Wed Jun 27 14:13:11 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 27 14:13:11 2012] Using photon index=1.80, rate=0.00444, arf fullrun_mos2_xmm0032140501_pi300-10000_pass1_cl_src19.arf
[Wed Jun 27 14:13:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 27 14:13:11 2012] Updating source flux to 1.4e-13
[Wed Jun 27 14:13:13 2012] Source 19 has fewer than 100.000000 counts, skipping spectral fitting