[Wed Jun 27 10:12:10 2012] Detection parameters:
  Position = (323.1, 251.8) = 6 46 28.82 -44 34 15.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 101.6 +/- 12.4
  Background counts = 3.4
  Rate = 0.009 +/- 0.001

[Wed Jun 27 10:12:11 2012] Off-axis axis estimate = 3.83'
[Wed Jun 27 11:28:11 2012] Using EEF radius (= 8.34 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 11:28:11 2012] Initial guess for spatial extent in simple fitting = 8.34"
[Wed Jun 27 11:28:11 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.069
[Wed Jun 27 11:28:11 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 8.34"
[Wed Jun 27 11:56:01 2012] fullrun_mos2_xmm0032140501_pi300-10000_cl_pass0_src3.ximg exists
[Wed Jun 27 11:56:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0032140501_pi300-10000_cl_pass0_src3.csv
[Wed Jun 27 11:56:01 2012] fullrun_mos2_xmm0032140501_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Jun 27 11:56:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0032140501_pi300-10000_cl_pass0_src3.csv
[Wed Jun 27 11:56:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0032140501_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0032140501_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 11:56:01 2012] fullrun_mos2_xmm0032140501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Jun 27 11:56:01 2012] fullrun_mos2_xmm0032140501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Jun 27 11:56:01 2012] Fit fullrun_mos2_xmm0032140501_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Jun 27 11:56:14 2012] Spatial fit model total counts = 102.596000, observed total counts = 104.000000
[Wed Jun 27 11:56:14 2012] Offset between fit and detection position for source 14 = 0.138767 pixels
[Wed Jun 27 11:56:14 2012] 102.851800 total counts/ 32.926400 bgd. counts: snr = 12.186047
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.138767 pixels
  Position = (323.1, 251.7) = 6 46 28.84 -44 34 15.9
  Extent = 4.9 (4.0-6.0)", rotation angle = 0
  Source counts = 69.9 +/- 10.1
  Background counts = 32.9
  Rate = 0.006 +/- 0.0008
[Wed Jun 27 11:56:14 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 11:56:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 11:56:14 2012] Assessing source extent using major axis lower bound
[Wed Jun 27 11:56:14 2012] Source does appear to be extended
[Wed Jun 27 11:56:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 13:04:01 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 27 13:04:01 2012] Initial guess for spatial extent in simple fitting = 4.89"
[Wed Jun 27 13:04:01 2012] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.137
[Wed Jun 27 13:04:01 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 4.89"
[Wed Jun 27 13:33:37 2012] fullrun_mos2_xmm0032140501_pi300-10000_cl_pass1_src3.ximg exists
[Wed Jun 27 13:33:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0032140501_pi300-10000_cl_pass1_src3.csv
[Wed Jun 27 13:33:37 2012] fullrun_mos2_xmm0032140501_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Jun 27 13:33:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0032140501_pi300-10000_cl_pass1_src3.csv
[Wed Jun 27 13:33:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0032140501_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0032140501_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 13:33:37 2012] fullrun_mos2_xmm0032140501_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Jun 27 13:33:37 2012] fullrun_mos2_xmm0032140501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Jun 27 13:33:37 2012] Fit fullrun_mos2_xmm0032140501_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Jun 27 13:33:49 2012] Spatial fit model total counts = 102.603000, observed total counts = 104.000000
[Wed Jun 27 13:33:49 2012] Offset between fit and detection position for source 14 = 0.000800 pixels
[Wed Jun 27 13:33:49 2012] 102.855600 total counts/ 32.998400 bgd. counts: snr = 12.160872
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.000800 pixels
  Position = (323.1, 251.7) = 6 46 28.84 -44 34 15.9
  Extent = 4.9 (4.0-6.0)", rotation angle = 0
  Source counts = 69.9 +/- 10.1
  Background counts = 33.0
  Rate = 0.006 +/- 0.0008
[Wed Jun 27 13:33:49 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 13:33:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 13:33:49 2012] Assessing source extent using major axis lower bound
[Wed Jun 27 13:33:49 2012] Source does appear to be extended
[Wed Jun 27 13:33:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 14:03:45 2012] XMMSAS src. selection expression = ellipse(28058.011460, 21847.175600, 292.528094, 292.528094, 0.000000, X, Y)
[Wed Jun 27 14:03:45 2012] Writing source region out to fullrun_mos2_xmm0032140501_pi300-10000_pass1_cl_src14_src.reg
[Wed Jun 27 14:03:45 2012] Extracting stamp from image fullrun_mos2_xmm0032140501_pi300-10000_cl_sm2.00.img.gz, (306, 235) - (340, 268)
[Wed Jun 27 14:03:45 2012] XMMSAS bgd. selection expression = annulus(28058.011460, 21847.175600, 487.546824, 975.093648, X, Y)
[Wed Jun 27 14:03:45 2012] Writing fullrun_mos2_xmm0032140501_pi300-10000_pass1_cl_src14.gif
[Wed Jun 27 14:04:07 2012] Mean detx,y = (2284.29, 2836.93) 
[Wed Jun 27 14:04:08 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 27 14:04:15 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 27 14:04:15 2012] Setting source spectrum file to fullrun_mos2_xmm0032140501_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Wed Jun 27 14:04:15 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0032140501_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Wed Jun 27 14:11:20 2012] Not generating rmf since there are only 69 counts
[Wed Jun 27 14:11:20 2012] rmf not generated due to insufficient counts
[Wed Jun 27 14:13:11 2012] Updating aperture counts using extracted products
[Wed Jun 27 14:13:11 2012] Error reading totcts from fullrun_mos2_xmm0032140501_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Wed Jun 27 14:13:11 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 27 14:13:11 2012] Using photon index=1.80, rate=0.00555, arf fullrun_mos2_xmm0032140501_pi300-10000_pass1_cl_src14.arf
[Wed Jun 27 14:13:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 27 14:13:11 2012] Updating source flux to 8.8e-14
[Wed Jun 27 14:13:13 2012] Source 14 has fewer than 100.000000 counts, skipping spectral fitting