[Wed Jun 27 10:12:10 2012] Detection parameters:
  Position = (280.0, 164.1) = 6 46 46.37 -44 40 37.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 118.4 +/- 13.2
  Background counts = 2.0
  Rate = 0.02 +/- 0.002

[Wed Jun 27 10:12:11 2012] Off-axis axis estimate = 9.83'
[Wed Jun 27 11:28:11 2012] Using EEF radius (= 11.35 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 11:28:11 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 27 11:28:11 2012] Initial guess for spatial extent in simple fitting = 11.35"
[Wed Jun 27 11:28:11 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.932
[Wed Jun 27 11:28:11 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.35"
[Wed Jun 27 11:56:01 2012] fullrun_mos2_xmm0032140501_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jun 27 11:56:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0032140501_pi300-10000_cl_pass0_src1.csv
[Wed Jun 27 11:56:01 2012] fullrun_mos2_xmm0032140501_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jun 27 11:56:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0032140501_pi300-10000_cl_pass0_src1.csv
[Wed Jun 27 11:56:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0032140501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0032140501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 11:56:01 2012] fullrun_mos2_xmm0032140501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jun 27 11:56:01 2012] fullrun_mos2_xmm0032140501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jun 27 11:56:01 2012] Fit fullrun_mos2_xmm0032140501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Jun 27 11:56:14 2012] Spatial fit model total counts = 161.084000, observed total counts = 171.000000
[Wed Jun 27 11:56:14 2012] Offset between fit and detection position for source 1 = 0.288913 pixels
[Wed Jun 27 11:56:14 2012] 155.241140 total counts/ 2.617140 bgd. counts: snr = 94.342929
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.288913 pixels
  Position = (280.3, 164.0) = 6 46 46.26 -44 40 37.3
  Extent = 16.1 (15.9-16.2)", rotation angle = 0
  Source counts = 152.6 +/- 12.5
  Background counts = 2.6
  Rate = 0.01 +/- 0.001
[Wed Jun 27 11:56:14 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 11:56:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 11:56:14 2012] Assessing source extent using major axis lower bound
[Wed Jun 27 11:56:14 2012] Source does appear to be extended
[Wed Jun 27 11:56:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 13:04:01 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 27 13:04:01 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 27 13:04:01 2012] Initial guess for spatial extent in simple fitting = 16.13"
[Wed Jun 27 13:04:01 2012] source mask rpix=3.7, npix_max = 70, mask sum = 72, frac = 1.017
[Wed Jun 27 13:04:01 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 16.13"
[Wed Jun 27 13:33:37 2012] fullrun_mos2_xmm0032140501_pi300-10000_cl_pass1_src1.ximg exists
[Wed Jun 27 13:33:37 2012] fullrun_mos2_xmm0032140501_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Jun 27 13:33:37 2012] Fit fullrun_mos2_xmm0032140501_pi300-10000_cl_pass1_src1 appears to have run properly
[Wed Jun 27 13:33:37 2012] fullrun_mos2_xmm0032140501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Jun 27 13:33:37 2012] fullrun_mos2_xmm0032140501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Jun 27 13:33:37 2012] Fit fullrun_mos2_xmm0032140501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Jun 27 13:33:49 2012] Spatial fit model total counts = 229.596000, observed total counts = 229.000000
[Wed Jun 27 13:33:49 2012] Offset between fit and detection position for source 1 = 0.827608 pixels
[Wed Jun 27 13:33:49 2012] 229.287000 total counts/ 122.051000 bgd. counts: snr = 9.706663
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.827608 pixels
  Position = (279.5, 163.8) = 6 46 46.59 -44 40 38.1
  Extent = 10.7" x 4.4", rotation angle = 347
  Source counts = 107.2 +/- 15.1
  Background counts = 122.1
  Rate = 0.009 +/- 0.001
[Wed Jun 27 13:33:49 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 13:33:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 13:33:49 2012] Assessing source extent using major
[Wed Jun 27 13:33:49 2012] Source does appear to be extended
[Wed Jun 27 13:33:49 2012] Computing asymmetry using major and minor axis, asym = 2.40
[Wed Jun 27 13:33:49 2012] Source is asymmetric
[Wed Jun 27 14:03:45 2012] XMMSAS src. selection expression = ellipse(24269.622593, 14202.830563, 639.552018, 265.990066, 347.256431, X, Y)
[Wed Jun 27 14:03:45 2012] Writing source region out to fullrun_mos2_xmm0032140501_pi300-10000_pass1_cl_src1_src.reg
[Wed Jun 27 14:03:45 2012] Extracting stamp from image fullrun_mos2_xmm0032140501_pi300-10000_cl_sm2.00.img.gz, (243, 127) - (316, 201)
[Wed Jun 27 14:03:45 2012] XMMSAS bgd. selection expression = annulus(24269.622593, 14202.830563, 1065.920031, 2131.840061, X, Y) && !ellipse(25315.828000, 16300.386600, 297.736809, 297.736809, 0.000000, X, Y)
[Wed Jun 27 14:03:45 2012] Writing fullrun_mos2_xmm0032140501_pi300-10000_pass1_cl_src1.gif
[Wed Jun 27 14:03:46 2012] Mean detx,y = (-3207.94, 9327.05) 
[Wed Jun 27 14:03:47 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 27 14:03:55 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 27 14:03:55 2012] Setting source spectrum file to fullrun_mos2_xmm0032140501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jun 27 14:03:55 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0032140501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Jun 27 14:13:11 2012] Updating aperture counts using extracted products
[Wed Jun 27 14:13:11 2012] Error reading totcts from fullrun_mos2_xmm0032140501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Jun 27 14:13:11 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 27 14:13:11 2012] Using photon index=1.80, rate=0.00852, arf fullrun_mos2_xmm0032140501_pi300-10000_pass1_cl_src1.arf
[Wed Jun 27 14:13:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 27 14:13:11 2012] Updating source flux to 2e-13
[Wed Jun 27 14:13:22 2012] Reading fit data from xmm0032140501/analysis//spectral/fullrun_mos2_xmm0032140501_pi300-10000_pass1_cl_src1_pl.csv
[Wed Jun 27 14:13:22 2012] Spectral fit parameter nH value = 9.61536e+21
[Wed Jun 27 14:13:22 2012] Spectral fit parameter PhoIndex value = 9.49996
[Wed Jun 27 14:13:22 2012] Failed to get F(0.3-8.0) from xmm0032140501/analysis//spectral/fullrun_mos2_xmm0032140501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Jun 27 14:13:22 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 27 14:13:22 2012] Using Nh = 9.6e+21, photon index=9.50, rate=0.00852, arf fullrun_mos2_xmm0032140501_pi300-10000_pass1_cl_src1.arf
[Wed Jun 27 14:13:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 27 14:13:22 2012] Updating source flux to 1.2e-13