[Wed Jun 27 10:11:43 2012] Detection parameters:
  Position = (214.6, 254.0) = 6 47 12.99 -44 33 59.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 30.2 +/- 6.7
  Background counts = 3.2
  Rate = 0.004 +/- 0.0009

[Wed Jun 27 10:11:43 2012] Off-axis axis estimate = 6.88'
[Wed Jun 27 10:56:40 2012] Using EEF radius (= 9.87 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 10:56:40 2012] Initial guess for spatial extent in simple fitting = 9.87"
[Wed Jun 27 10:56:40 2012] source mask rpix=2.3, npix_max = 30, mask sum = 22, frac = 0.718
[Wed Jun 27 10:56:40 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 9.87"
[Wed Jun 27 11:28:10 2012] fullrun_mos1_xmm0032140501_pi300-10000_cl_pass0_src11.ximg exists
[Wed Jun 27 11:28:10 2012] fullrun_mos1_xmm0032140501_pi300-10000_cl_pass0_src11_1.ximg exists
[Wed Jun 27 11:28:10 2012] Fit fullrun_mos1_xmm0032140501_pi300-10000_cl_pass0_src11 appears to have run properly
[Wed Jun 27 11:28:11 2012] fullrun_mos1_xmm0032140501_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Wed Jun 27 11:28:11 2012] fullrun_mos1_xmm0032140501_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Jun 27 11:28:11 2012] Fit fullrun_mos1_xmm0032140501_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Wed Jun 27 11:56:10 2012] Spatial fit model total counts = 57.684100, observed total counts = 54.000000
[Wed Jun 27 11:56:10 2012] Offset between fit and detection position for source 17 = 1.136389 pixels
[Wed Jun 27 11:56:10 2012] 57.935500 total counts/ 38.092700 bgd. counts: snr = 3.215008
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 1.136389 pixels
  Position = (214.3, 255.1) = 6 47 13.14 -44 34 0.8
  Extent = 3.7 (2.5-8.8)", rotation angle = 0
  Source counts = 19.8 +/- 7.6
  Background counts = 38.1
  Rate = 0.002 +/- 0.0006
[Wed Jun 27 11:56:10 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 11:56:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 11:56:10 2012] Assessing source extent using major axis lower bound
[Wed Jun 27 11:56:10 2012] Source does appear to be extended
[Wed Jun 27 11:56:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 12:37:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 27 12:37:38 2012] Initial guess for spatial extent in simple fitting = 3.73"
[Wed Jun 27 12:37:38 2012] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.813
[Wed Jun 27 12:37:38 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 3.73"
[Wed Jun 27 13:04:01 2012] fullrun_mos1_xmm0032140501_pi300-10000_cl_pass1_src11.ximg exists
[Wed Jun 27 13:04:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0032140501_pi300-10000_cl_pass1_src11.csv
[Wed Jun 27 13:04:01 2012] fullrun_mos1_xmm0032140501_pi300-10000_cl_pass1_src11_1.ximg exists
[Wed Jun 27 13:04:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0032140501_pi300-10000_cl_pass1_src11.csv
[Wed Jun 27 13:04:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0032140501_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0032140501_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 13:04:01 2012] fullrun_mos1_xmm0032140501_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Wed Jun 27 13:04:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0032140501_pi300-10000_cl_pass1_tfrozen_src11.csv
[Wed Jun 27 13:04:01 2012] fullrun_mos1_xmm0032140501_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Wed Jun 27 13:04:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0032140501_pi300-10000_cl_pass1_tfrozen_src11.csv
[Wed Jun 27 13:04:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0032140501_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0032140501_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 13:33:46 2012] Spatial fit model total counts = 104.036000, observed total counts = 57.000000
[Wed Jun 27 13:33:46 2012] Poor agreement between spatial fit and data for source 17
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 27 13:33:46 2012] Vigneting correction estimate = 1.000000
[Wed Jun 27 13:33:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 27 13:33:46 2012] Assessing source extent using major axis lower bound
[Wed Jun 27 13:33:46 2012] Source does appear to be extended
[Wed Jun 27 13:33:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 27 13:57:09 2012] XMMSAS src. selection expression = ellipse(18591.430200, 22143.868840, 224.089206, 224.089206, 0.000000, X, Y)
[Wed Jun 27 13:57:09 2012] Writing source region out to fullrun_mos1_xmm0032140501_pi300-10000_pass1_cl_src17_src.reg
[Wed Jun 27 13:57:09 2012] Extracting stamp from image fullrun_mos1_xmm0032140501_pi300-10000_cl_sm2.00.img.gz, (201, 242) - (227, 268)
[Wed Jun 27 13:57:09 2012] XMMSAS bgd. selection expression = annulus(18591.430200, 22143.868840, 373.482011, 746.964021, X, Y) && !ellipse(17008.788818, 21760.149597, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 27 13:57:09 2012] Writing fullrun_mos1_xmm0032140501_pi300-10000_pass1_cl_src17.gif
[Wed Jun 27 14:00:01 2012] Mean detx,y = (433.50, 6644.57) 
[Wed Jun 27 14:00:02 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jun 27 14:00:13 2012] Binned source spectrum to 10 counts/bin
[Wed Jun 27 14:00:13 2012] Setting source spectrum file to fullrun_mos1_xmm0032140501_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Wed Jun 27 14:00:13 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0032140501_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Wed Jun 27 14:03:04 2012] Not generating rmf since there are only 19 counts
[Wed Jun 27 14:03:04 2012] rmf not generated due to insufficient counts
[Wed Jun 27 14:13:10 2012] Updating aperture counts using extracted products
[Wed Jun 27 14:13:10 2012] Error reading totcts from fullrun_mos1_xmm0032140501_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Wed Jun 27 14:13:11 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jun 27 14:13:11 2012] Using photon index=1.80, rate=0.00158, arf fullrun_mos1_xmm0032140501_pi300-10000_pass1_cl_src17.arf
[Wed Jun 27 14:13:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jun 27 14:13:11 2012] Updating source flux to 2.7e-14
[Wed Jun 27 14:13:12 2012] Flag p found in src. 17 procflags, skipping spectral fitting
[Wed Jun 27 14:13:12 2012] Source 17 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Jun 27 14:13:13 2012] xmm0032140501/analysis//spectral/fullrun_mos1_xmm0032140501_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete