[Mon Jun 11 10:06:28 2012] Detection parameters:
  Position = (312.8, 296.2) = 1 39 43.73 -67 49 10.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 442.6 +/- 25.5
  Background counts = 20.5
  Rate = 0.06 +/- 0.004

[Mon Jun 11 10:06:28 2012] Off-axis axis estimate = 1.05'
[Mon Jun 11 10:07:32 2012] Using EEF radius (= 6.95 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 10:07:32 2012] Initial guess for spatial extent in simple fitting = 6.95"
[Mon Jun 11 10:07:32 2012] source mask rpix=1.6, npix_max = 17, mask sum = 14, frac = 0.795
[Mon Jun 11 10:07:32 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 6.95"
[Mon Jun 11 10:26:03 2012] fullrun_pn_xmm0032140401_pi300-10000_cl_pass0_src7.ximg exists
[Mon Jun 11 10:26:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0032140401_pi300-10000_cl_pass0_src7.csv
[Mon Jun 11 10:26:03 2012] fullrun_pn_xmm0032140401_pi300-10000_cl_pass0_src7_1.ximg exists
[Mon Jun 11 10:26:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0032140401_pi300-10000_cl_pass0_src7.csv
[Mon Jun 11 10:26:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0032140401_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0032140401_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 10:26:03 2012] fullrun_pn_xmm0032140401_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Mon Jun 11 10:26:03 2012] fullrun_pn_xmm0032140401_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Mon Jun 11 10:26:03 2012] Fit fullrun_pn_xmm0032140401_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Mon Jun 11 10:46:48 2012] Spatial fit model total counts = 451.043000, observed total counts = 422.000000
[Mon Jun 11 10:46:48 2012] Offset between fit and detection position for source 7 = 0.456642 pixels
[Mon Jun 11 10:46:48 2012] 451.653000 total counts/ 171.171000 bgd. counts: snr = 21.438278
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.456642 pixels
  Position = (312.8, 295.7) = 1 39 43.74 -67 49 10.0
  Extent = 4.9 (4.3-5.6)", rotation angle = 0
  Source counts = 280.5 +/- 21.3
  Background counts = 171.2
  Rate = 0.05 +/- 0.004
[Mon Jun 11 10:46:48 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 10:46:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 10:46:48 2012] Assessing source extent using major axis lower bound
[Mon Jun 11 10:46:48 2012] Source does appear to be extended
[Mon Jun 11 10:46:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 11 10:46:55 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 11 10:46:55 2012] Initial guess for spatial extent in simple fitting = 4.95"
[Mon Jun 11 10:46:55 2012] source mask rpix=1.1, npix_max = 10, mask sum = 8, frac = 0.746
[Mon Jun 11 10:46:55 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 4.95"
[Mon Jun 11 11:04:18 2012] fullrun_pn_xmm0032140401_pi300-10000_cl_pass1_src7.ximg exists
[Mon Jun 11 11:04:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0032140401_pi300-10000_cl_pass1_src7.csv
[Mon Jun 11 11:04:18 2012] fullrun_pn_xmm0032140401_pi300-10000_cl_pass1_src7_1.ximg exists
[Mon Jun 11 11:04:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0032140401_pi300-10000_cl_pass1_src7.csv
[Mon Jun 11 11:04:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0032140401_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0032140401_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 11:04:18 2012] fullrun_pn_xmm0032140401_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Mon Jun 11 11:04:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0032140401_pi300-10000_cl_pass1_tfrozen_src7.csv
[Mon Jun 11 11:04:18 2012] fullrun_pn_xmm0032140401_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Mon Jun 11 11:04:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0032140401_pi300-10000_cl_pass1_tfrozen_src7.csv
[Mon Jun 11 11:04:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0032140401_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0032140401_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 11:21:53 2012] Warning, spatial fit 7 centroid is now closest to src. 9
[Mon Jun 11 11:21:53 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 11:21:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 11:21:53 2012] Assessing source extent using major axis lower bound
[Mon Jun 11 11:21:53 2012] Source does appear to be extended
[Mon Jun 11 11:21:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 11 11:21:59 2012] XMMSAS src. selection expression = ellipse(27161.419800, 25681.543200, 296.913809, 296.913809, 0.000000, X, Y)
[Mon Jun 11 11:21:59 2012] Writing source region out to fullrun_pn_xmm0032140401_pi300-10000_pass1_cl_src7_src.reg
[Mon Jun 11 11:21:59 2012] Extracting stamp from image fullrun_pn_xmm0032140401_pi300-10000_cl_sm2.00.img.gz, (296, 279) - (330, 313)
[Mon Jun 11 11:21:59 2012] XMMSAS bgd. selection expression = annulus(27161.419800, 25681.543200, 494.856348, 989.712695, X, Y) && !ellipse(26741.173065, 24240.812500, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 11 11:21:59 2012] Writing fullrun_pn_xmm0032140401_pi300-10000_pass1_cl_src7.gif
[Mon Jun 11 11:23:56 2012] Mean detx,y = (-1841.66, 2465.45) 
[Mon Jun 11 11:23:58 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 11 11:24:08 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 11 11:24:08 2012] Setting source spectrum file to fullrun_pn_xmm0032140401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Mon Jun 11 11:24:08 2012] Setting bgd. spectrum file to fullrun_pn_xmm0032140401_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Mon Jun 11 11:46:17 2012] Updating aperture counts using extracted products
[Mon Jun 11 11:46:17 2012] Error reading totcts from fullrun_pn_xmm0032140401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Mon Jun 11 11:46:17 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 11 11:46:17 2012] Using photon index=1.80, rate=0.0488, arf fullrun_pn_xmm0032140401_pi300-10000_pass1_cl_src7.arf
[Mon Jun 11 11:46:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 11 11:46:17 2012] Updating source flux to 2.1e-13
[Mon Jun 11 11:46:41 2012] Reading fit data from xmm0032140401/analysis//spectral/fullrun_pn_xmm0032140401_pi300-10000_pass1_cl_src7_pl.csv
[Mon Jun 11 11:46:41 2012] Spectral fit parameter nH value = 5.54794e+15
[Mon Jun 11 11:46:41 2012] Spectral fit parameter PhoIndex value = 2.00899
[Mon Jun 11 11:46:41 2012] Failed to get F(0.3-8.0) from xmm0032140401/analysis//spectral/fullrun_pn_xmm0032140401_pi300-10000_pass1_cl_src7_pl.csv, possibly due to different flux energy range selected
[Mon Jun 11 11:46:41 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 11 11:46:41 2012] Using Nh = 5.5e+15, photon index=2.01, rate=0.0488, arf fullrun_pn_xmm0032140401_pi300-10000_pass1_cl_src7.arf
[Mon Jun 11 11:46:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 11 11:46:41 2012] Updating source flux to 1.9e-13