[Mon Jun 11 10:06:28 2012] Detection parameters:
  Position = (311.9, 191.0) = 1 39 44.32 -67 56 46.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 111.3 +/- 14.2
  Background counts = 17.1
  Rate = 0.01 +/- 0.002

[Mon Jun 11 10:06:28 2012] Off-axis axis estimate = 7.85'
[Mon Jun 11 10:07:32 2012] Using EEF radius (= 10.35 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 10:07:32 2012] Initial guess for spatial extent in simple fitting = 10.35"
[Mon Jun 11 10:07:32 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.085
[Mon Jun 11 10:07:32 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 10.35"
[Mon Jun 11 10:26:03 2012] fullrun_pn_xmm0032140401_pi300-10000_cl_pass0_src14.ximg exists
[Mon Jun 11 10:26:03 2012] fullrun_pn_xmm0032140401_pi300-10000_cl_pass0_src14_1.ximg exists
[Mon Jun 11 10:26:03 2012] Fit fullrun_pn_xmm0032140401_pi300-10000_cl_pass0_src14 appears to have run properly
[Mon Jun 11 10:26:03 2012] fullrun_pn_xmm0032140401_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Mon Jun 11 10:26:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0032140401_pi300-10000_cl_pass0_tfrozen_src14.csv
[Mon Jun 11 10:26:03 2012] fullrun_pn_xmm0032140401_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Mon Jun 11 10:26:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0032140401_pi300-10000_cl_pass0_tfrozen_src14.csv
[Mon Jun 11 10:26:03 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0032140401_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0032140401_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 10:46:48 2012] Source 14 is offset by -6.315804 and -7.335662 pixels which is larger than
2 X fitted extent = 0.828340 x 0.873989, not incorporating fit results
[Mon Jun 11 10:46:48 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 10:46:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 10:46:48 2012] Assessing source extent using major
[Mon Jun 11 10:46:48 2012] Source does appear to be extended
[Mon Jun 11 10:46:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 11 10:46:55 2012] Using EEF radius (= 10.35 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 10:46:55 2012] Initial guess for spatial extent in simple fitting = 10.35"
[Mon Jun 11 10:46:55 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.085
[Mon Jun 11 10:46:55 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 10.35"
[Mon Jun 11 11:04:18 2012] fullrun_pn_xmm0032140401_pi300-10000_cl_pass1_src14.ximg exists
[Mon Jun 11 11:04:18 2012] fullrun_pn_xmm0032140401_pi300-10000_cl_pass1_src14_1.ximg exists
[Mon Jun 11 11:04:18 2012] Fit fullrun_pn_xmm0032140401_pi300-10000_cl_pass1_src14 appears to have run properly
[Mon Jun 11 11:04:18 2012] fullrun_pn_xmm0032140401_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Mon Jun 11 11:04:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0032140401_pi300-10000_cl_pass1_tfrozen_src14.csv
[Mon Jun 11 11:04:18 2012] fullrun_pn_xmm0032140401_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Mon Jun 11 11:04:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0032140401_pi300-10000_cl_pass1_tfrozen_src14.csv
[Mon Jun 11 11:04:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0032140401_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0032140401_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 11:21:53 2012] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 14.149365 pixels away
[Mon Jun 11 11:21:53 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 11:21:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 11:21:53 2012] Assessing source extent using major
[Mon Jun 11 11:21:53 2012] Source does appear to be extended
[Mon Jun 11 11:21:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 11 11:21:59 2012] XMMSAS src. selection expression = ellipse(27089.388123, 16567.686234, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 11 11:21:59 2012] Writing source region out to fullrun_pn_xmm0032140401_pi300-10000_pass1_cl_src14_src.reg
[Mon Jun 11 11:21:59 2012] Extracting stamp from image fullrun_pn_xmm0032140401_pi300-10000_cl_sm2.00.img.gz, (274, 153) - (349, 228)
[Mon Jun 11 11:21:59 2012] XMMSAS bgd. selection expression = annulus(27089.388123, 16567.686234, 1087.500000, 2175.000000, X, Y) && !ellipse(24175.020874, 14977.801590, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 11 11:21:59 2012] Writing fullrun_pn_xmm0032140401_pi300-10000_pass1_cl_src14.gif
[Mon Jun 11 11:25:51 2012] Mean detx,y = (-9837.19, -1922.97) 
[Mon Jun 11 11:25:52 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 11 11:26:06 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 11 11:26:06 2012] Setting source spectrum file to fullrun_pn_xmm0032140401_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Mon Jun 11 11:26:06 2012] Setting bgd. spectrum file to fullrun_pn_xmm0032140401_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Mon Jun 11 11:34:12 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 11 11:34:12 2012] rmf not generated due to insufficient counts
[Mon Jun 11 11:46:17 2012] Updating aperture counts using extracted products
[Mon Jun 11 11:46:17 2012] Error reading totcts from fullrun_pn_xmm0032140401_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Mon Jun 11 11:46:17 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 11 11:46:17 2012] Using photon index=1.80, rate=0.0121, arf fullrun_pn_xmm0032140401_pi300-10000_pass1_cl_src14.arf
[Mon Jun 11 11:46:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 11 11:46:18 2012] Updating source flux to 6.1e-14
[Mon Jun 11 11:46:33 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting