[Mon Jun 11 10:06:40 2012] Detection parameters:
  Position = (312.7, 295.8) = 1 39 43.75 -67 49 10.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 283.8 +/- 21.2
  Background counts = 17.0
  Rate = 0.03 +/- 0.002

[Mon Jun 11 10:06:40 2012] Off-axis axis estimate = 1.05'
[Mon Jun 11 10:26:03 2012] Using EEF radius (= 6.96 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 10:26:03 2012] Initial guess for spatial extent in simple fitting = 6.96"
[Mon Jun 11 10:26:03 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.908
[Mon Jun 11 10:26:03 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 6.96"
[Mon Jun 11 10:37:34 2012] fullrun_mos1_xmm0032140401_pi300-10000_cl_pass0_src2.ximg exists
[Mon Jun 11 10:37:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0032140401_pi300-10000_cl_pass0_src2.csv
[Mon Jun 11 10:37:34 2012] fullrun_mos1_xmm0032140401_pi300-10000_cl_pass0_src2_1.ximg exists
[Mon Jun 11 10:37:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0032140401_pi300-10000_cl_pass0_src2.csv
[Mon Jun 11 10:37:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0032140401_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0032140401_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 11 10:37:34 2012] fullrun_mos1_xmm0032140401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Mon Jun 11 10:37:34 2012] fullrun_mos1_xmm0032140401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Mon Jun 11 10:37:34 2012] Fit fullrun_mos1_xmm0032140401_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Mon Jun 11 10:46:49 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 10.382096 pixels away
[Mon Jun 11 10:46:49 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 10:46:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 10:46:49 2012] Assessing source extent using major
[Mon Jun 11 10:46:49 2012] Source does appear to be extended
[Mon Jun 11 10:46:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 11 11:04:18 2012] Using EEF radius (= 6.96 ")to estimate initial spatial extent for simple fitting
[Mon Jun 11 11:04:18 2012] Initial guess for spatial extent in simple fitting = 6.96"
[Mon Jun 11 11:04:18 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.908
[Mon Jun 11 11:04:18 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 6.96"
[Mon Jun 11 11:14:00 2012] fullrun_mos1_xmm0032140401_pi300-10000_cl_pass1_src2.ximg exists
[Mon Jun 11 11:14:00 2012] fullrun_mos1_xmm0032140401_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon Jun 11 11:14:00 2012] Fit fullrun_mos1_xmm0032140401_pi300-10000_cl_pass1_src2 appears to have run properly
[Mon Jun 11 11:14:00 2012] fullrun_mos1_xmm0032140401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon Jun 11 11:14:00 2012] fullrun_mos1_xmm0032140401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon Jun 11 11:14:00 2012] Fit fullrun_mos1_xmm0032140401_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Mon Jun 11 11:21:54 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 10.110442 pixels away
[Mon Jun 11 11:21:54 2012] Vigneting correction estimate = 1.000000
[Mon Jun 11 11:21:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 11 11:21:54 2012] Assessing source extent using major
[Mon Jun 11 11:21:54 2012] Source does appear to be extended
[Mon Jun 11 11:21:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 11 11:34:37 2012] XMMSAS src. selection expression = ellipse(27159.417175, 25690.400085, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 11 11:34:37 2012] Writing source region out to fullrun_mos1_xmm0032140401_pi300-10000_pass1_cl_src5_src.reg
[Mon Jun 11 11:34:37 2012] Extracting stamp from image fullrun_mos1_xmm0032140401_pi300-10000_cl_sm2.00.img.gz, (275, 258) - (350, 333)
[Mon Jun 11 11:34:37 2012] XMMSAS bgd. selection expression = annulus(27159.417175, 25690.400085, 1087.500000, 2175.000000, X, Y)
[Mon Jun 11 11:34:37 2012] Writing fullrun_mos1_xmm0032140401_pi300-10000_pass1_cl_src5.gif
[Mon Jun 11 11:35:16 2012] Mean detx,y = (-2406.64, -2176.00) 
[Mon Jun 11 11:35:17 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 11 11:35:22 2012] Binned source spectrum to 10 counts/bin
[Mon Jun 11 11:35:22 2012] Setting source spectrum file to fullrun_mos1_xmm0032140401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon Jun 11 11:35:22 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0032140401_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Mon Jun 11 11:39:27 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 11 11:39:27 2012] rmf not generated due to insufficient counts
[Mon Jun 11 11:46:18 2012] Updating aperture counts using extracted products
[Mon Jun 11 11:46:18 2012] Error reading totcts from fullrun_mos1_xmm0032140401_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon Jun 11 11:46:18 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jun 11 11:46:18 2012] Using photon index=1.80, rate=0.0272, arf fullrun_mos1_xmm0032140401_pi300-10000_pass1_cl_src5.arf
[Mon Jun 11 11:46:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 11 11:46:18 2012] Updating source flux to 3e-13
[Mon Jun 11 11:46:19 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting