[Thu Aug  2 22:21:00 2012] Detection parameters:
  Position = (194.4, 319.9) = 23 2 54.32 8 39 4.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 220.8 +/- 18.8
  Background counts = 15.9
  Rate = 0.03 +/- 0.002

[Thu Aug  2 22:21:01 2012] Off-axis axis estimate = 7.70'
[Thu Aug  2 22:37:21 2012] Using EEF radius (= 10.28 ")to estimate initial spatial extent for simple fitting
[Thu Aug  2 22:37:21 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Aug  2 22:37:21 2012] Initial guess for spatial extent in simple fitting = 10.28"
[Thu Aug  2 22:37:21 2012] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.098
[Thu Aug  2 22:37:21 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.28"
[Thu Aug  2 22:45:08 2012] fullrun_mos2_xmm0032140201_pi300-10000_cl_pass0_src1.ximg exists
[Thu Aug  2 22:45:08 2012] fullrun_mos2_xmm0032140201_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Aug  2 22:45:08 2012] Fit fullrun_mos2_xmm0032140201_pi300-10000_cl_pass0_src1 appears to have run properly
[Thu Aug  2 22:45:08 2012] fullrun_mos2_xmm0032140201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Aug  2 22:45:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0032140201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Aug  2 22:45:08 2012] fullrun_mos2_xmm0032140201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Aug  2 22:45:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0032140201_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Aug  2 22:45:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0032140201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0032140201_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 22:45:12 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 13.790222 pixels away
[Thu Aug  2 22:45:12 2012] Vigneting correction estimate = 1.000000
[Thu Aug  2 22:45:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  2 22:45:12 2012] Assessing source extent using major
[Thu Aug  2 22:45:12 2012] Source does appear to be extended
[Thu Aug  2 22:45:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  2 22:57:18 2012] Using EEF radius (= 10.28 ")to estimate initial spatial extent for simple fitting
[Thu Aug  2 22:57:18 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Aug  2 22:57:18 2012] Initial guess for spatial extent in simple fitting = 10.28"
[Thu Aug  2 22:57:18 2012] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.098
[Thu Aug  2 22:57:18 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 10.28"
[Thu Aug  2 23:04:56 2012] fullrun_mos2_xmm0032140201_pi300-10000_cl_pass1_src1.ximg exists
[Thu Aug  2 23:04:56 2012] fullrun_mos2_xmm0032140201_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Aug  2 23:04:56 2012] Fit fullrun_mos2_xmm0032140201_pi300-10000_cl_pass1_src1 appears to have run properly
[Thu Aug  2 23:04:56 2012] fullrun_mos2_xmm0032140201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Aug  2 23:04:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0032140201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Thu Aug  2 23:04:56 2012] fullrun_mos2_xmm0032140201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Aug  2 23:04:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0032140201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Thu Aug  2 23:04:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0032140201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0032140201_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 23:05:00 2012] Spatial fit model total counts = 230.137000, observed total counts = 211.000000
[Thu Aug  2 23:05:00 2012] Offset between fit and detection position for source 2 = 0.131237 pixels
[Thu Aug  2 23:05:00 2012] 228.687800 total counts/ 99.236800 bgd. counts: snr = 12.994783
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.131237 pixels
  Position = (194.4, 319.8) = 23 2 54.30 8 39 3.2
  Extent = 6.8 (5.4-8.4)" x 5.8 (4.6-7.4)", rotation angle = 89 (86-90) degrees
  Source counts = 129.5 +/- 15.1
  Background counts = 99.2
  Rate = 0.01 +/- 0.002
[Thu Aug  2 23:05:00 2012] Vigneting correction estimate = 1.000000
[Thu Aug  2 23:05:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  2 23:05:00 2012] Assessing source extent using major axis lower bound
[Thu Aug  2 23:05:00 2012] Source does appear to be extended
[Thu Aug  2 23:05:00 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.72
[Thu Aug  2 23:11:31 2012] XMMSAS src. selection expression = ellipse(16865.757400, 27771.020600, 405.757212, 349.684810, 88.530190, X, Y)
[Thu Aug  2 23:11:31 2012] Writing source region out to fullrun_mos2_xmm0032140201_pi300-10000_pass1_cl_src2_src.reg
[Thu Aug  2 23:11:31 2012] Extracting stamp from image fullrun_mos2_xmm0032140201_pi300-10000_cl_sm2.00.img.gz, (171, 296) - (218, 343)
[Thu Aug  2 23:11:31 2012] XMMSAS bgd. selection expression = annulus(16865.757400, 27771.020600, 676.262019, 1352.524039, X, Y)
[Thu Aug  2 23:11:31 2012] Writing fullrun_mos2_xmm0032140201_pi300-10000_pass1_cl_src2.gif
[Thu Aug  2 23:11:32 2012] Mean detx,y = (-7898.96, 3.91) 
[Thu Aug  2 23:11:33 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  2 23:11:42 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  2 23:11:42 2012] Setting source spectrum file to fullrun_mos2_xmm0032140201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Aug  2 23:11:42 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0032140201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Aug  2 23:17:00 2012] Updating aperture counts using extracted products
[Thu Aug  2 23:17:00 2012] Error reading totcts from fullrun_mos2_xmm0032140201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Aug  2 23:17:00 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  2 23:17:00 2012] Using photon index=1.80, rate=0.0146, arf fullrun_mos2_xmm0032140201_pi300-10000_pass1_cl_src2.arf
[Thu Aug  2 23:17:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  2 23:17:00 2012] Updating source flux to 2.3e-13
[Thu Aug  2 23:17:07 2012] Reading fit data from xmm0032140201/analysis//spectral/fullrun_mos2_xmm0032140201_pi300-10000_pass1_cl_src2_pl.csv
[Thu Aug  2 23:17:07 2012] Spectral fit parameter nH value = 1.08154e+21
[Thu Aug  2 23:17:07 2012] Spectral fit parameter PhoIndex value = 2.1652
[Thu Aug  2 23:17:07 2012] Failed to get F(0.3-8.0) from xmm0032140201/analysis//spectral/fullrun_mos2_xmm0032140201_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Thu Aug  2 23:17:07 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  2 23:17:07 2012] Using Nh = 1.1e+21, photon index=2.17, rate=0.0146, arf fullrun_mos2_xmm0032140201_pi300-10000_pass1_cl_src2.arf
[Thu Aug  2 23:17:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  2 23:17:07 2012] Updating source flux to 2.1e-13