[Wed Oct  5 20:40:52 2011] Detection parameters:
  Position = (366.5, 244.5) = 12 17 31.72 47 33 0.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 145.9 +/- 21.3
  Background counts = 141.4
  Rate = 0.008 +/- 0.001

[Wed Oct  5 20:40:52 2011] Off-axis axis estimate = 6.30'
[Wed Oct  5 20:49:53 2011] Using EEF radius (= 9.58 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 20:49:53 2011] Initial guess for spatial extent in simple fitting = 9.58"
[Wed Oct  5 20:49:53 2011] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.856
[Wed Oct  5 20:49:53 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 9.58"
[Wed Oct  5 21:11:05 2011] fullrun_mos1_xmm0032140101_pi300-10000_cl_pass0_src3.ximg exists
[Wed Oct  5 21:11:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0032140101_pi300-10000_cl_pass0_src3.csv
[Wed Oct  5 21:11:05 2011] fullrun_mos1_xmm0032140101_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Oct  5 21:11:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0032140101_pi300-10000_cl_pass0_src3.csv
[Wed Oct  5 21:11:05 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0032140101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0032140101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 21:11:05 2011] fullrun_mos1_xmm0032140101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Oct  5 21:11:05 2011] fullrun_mos1_xmm0032140101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Oct  5 21:11:05 2011] Fit fullrun_mos1_xmm0032140101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Oct  5 21:17:48 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 11.747747 pixels away
[Wed Oct  5 21:17:48 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 21:17:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 21:17:48 2011] Assessing source extent using major
[Wed Oct  5 21:17:48 2011] Source does appear to be extended
[Wed Oct  5 21:17:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 21:21:15 2011] Using EEF radius (= 9.58 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 21:21:15 2011] Initial guess for spatial extent in simple fitting = 9.58"
[Wed Oct  5 21:21:15 2011] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.856
[Wed Oct  5 21:21:15 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 9.58"
[Wed Oct  5 21:44:47 2011] fullrun_mos1_xmm0032140101_pi300-10000_cl_pass1_src2.ximg exists
[Wed Oct  5 21:44:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0032140101_pi300-10000_cl_pass1_src2.csv
[Wed Oct  5 21:44:47 2011] fullrun_mos1_xmm0032140101_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed Oct  5 21:44:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0032140101_pi300-10000_cl_pass1_src2.csv
[Wed Oct  5 21:44:47 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0032140101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0032140101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 21:44:47 2011] fullrun_mos1_xmm0032140101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed Oct  5 21:44:47 2011] fullrun_mos1_xmm0032140101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Oct  5 21:44:47 2011] Fit fullrun_mos1_xmm0032140101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Wed Oct  5 21:46:30 2011] Spatial fit model total counts = 348.996000, observed total counts = 349.000000
[Wed Oct  5 21:46:30 2011] Offset between fit and detection position for source 5 = 0.376975 pixels
[Wed Oct  5 21:46:30 2011] 354.293000 total counts/ 320.435000 bgd. counts: snr = 1.891435
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.376975 pixels
  Position = (366.7, 244.8) = 12 17 31.62 47 33 2.0
  Extent = 5.3 (2.9-9.0)", rotation angle = 0
  Source counts = 33.9 +/- 18.8
  Background counts = 320.4
  Rate = 0.004 +/- 0.002
[Wed Oct  5 21:46:30 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 21:46:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 21:46:30 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 21:46:30 2011] Source does appear to be extended
[Wed Oct  5 21:46:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 21:54:53 2011] XMMSAS src. selection expression = ellipse(31858.268400, 21250.365320, 315.320409, 315.320409, 0.000000, X, Y)
[Wed Oct  5 21:54:53 2011] Writing source region out to fullrun_mos1_xmm0032140101_pi300-10000_pass1_cl_src5_src.reg
[Wed Oct  5 21:54:53 2011] Extracting stamp from image fullrun_mos1_xmm0032140101_pi300-10000_cl_sm2.00.img.gz, (349, 227) - (385, 263)
[Wed Oct  5 21:54:53 2011] XMMSAS bgd. selection expression = annulus(31858.268400, 21250.365320, 525.534015, 1051.068030, X, Y)
[Wed Oct  5 21:54:53 2011] Writing fullrun_mos1_xmm0032140101_pi300-10000_pass1_cl_src5.gif
[Wed Oct  5 21:55:59 2011] Mean detx,y = (-8902.16, -476.72) 
[Wed Oct  5 21:56:00 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Oct  5 21:56:08 2011] Binned source spectrum to 10 counts/bin
[Wed Oct  5 21:56:08 2011] Setting source spectrum file to fullrun_mos1_xmm0032140101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Oct  5 21:56:08 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0032140101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Wed Oct  5 22:01:13 2011] Not generating rmf since there are only 33 counts
[Wed Oct  5 22:01:13 2011] rmf not generated due to insufficient counts
[Wed Oct  5 22:07:01 2011] Updating aperture counts using extracted products
[Wed Oct  5 22:07:01 2011] Error reading totcts from fullrun_mos1_xmm0032140101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Oct  5 22:07:02 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 22:07:02 2011] Using photon index=1.80, rate=0.00416, arf fullrun_mos1_xmm0032140101_pi300-10000_pass1_cl_src5.arf
[Wed Oct  5 22:07:02 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Oct  5 22:07:02 2011] Updating source flux to 8e-14
[Wed Oct  5 22:07:03 2011] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Oct  5 22:07:21 2011] xmm0032140101/analysis//spectral/fullrun_mos1_xmm0032140101_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete