[Fri May 24 03:17:20 2013] Detection parameters:
  Position = (343.8, 425.6) = 0 34 2.73 -5 24 22.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 260.0 +/- 21.7
  Background counts = 26.5
  Rate = 0.007 +/- 0.0006

[Fri May 24 03:17:21 2013] Off-axis axis estimate = 9.79'
[Fri May 24 03:56:47 2013] Using EEF radius (= 11.32 ")to estimate initial spatial extent for simple fitting
[Fri May 24 03:56:47 2013] Initial guess for spatial extent in simple fitting = 11.32"
[Fri May 24 03:56:47 2013] source mask rpix=2.6, npix_max = 38, mask sum = 21, frac = 0.545
[Fri May 24 03:56:47 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 11.32"
[Fri May 24 04:37:27 2013] fullrun_mos2_xmm0031740101_pi300-10000_cl_pass0_src3.ximg exists
[Fri May 24 04:37:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0031740101_pi300-10000_cl_pass0_src3.csv
[Fri May 24 04:37:27 2013] fullrun_mos2_xmm0031740101_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri May 24 04:37:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0031740101_pi300-10000_cl_pass0_src3.csv
[Fri May 24 04:37:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0031740101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0031740101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 04:37:28 2013] fullrun_mos2_xmm0031740101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri May 24 04:37:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0031740101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri May 24 04:37:28 2013] fullrun_mos2_xmm0031740101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri May 24 04:37:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0031740101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri May 24 04:37:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0031740101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0031740101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 04:37:41 2013] Warning, spatial fit 3 centroid is now closest to src. 4
[Fri May 24 04:37:41 2013] Vigneting correction estimate = 1.000000
[Fri May 24 04:37:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 04:37:41 2013] Assessing source extent using major
[Fri May 24 04:37:41 2013] Source does appear to be extended
[Fri May 24 04:37:41 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 04:37:41 2013] Source is confused with source 2
[Fri May 24 04:37:41 2013] Source is confused with source 4
[Fri May 24 05:18:24 2013] Using EEF radius (= 11.32 ")to estimate initial spatial extent for simple fitting
[Fri May 24 05:18:24 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 24 05:18:24 2013] Initial guess for spatial extent in simple fitting = 11.32"
[Fri May 24 05:18:24 2013] source mask rpix=2.6, npix_max = 38, mask sum = 21, frac = 0.545
[Fri May 24 05:18:24 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 11.32"
[Fri May 24 06:01:48 2013] fullrun_mos2_xmm0031740101_pi300-10000_cl_pass1_src3.ximg exists
[Fri May 24 06:01:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0031740101_pi300-10000_cl_pass1_src3.csv
[Fri May 24 06:01:48 2013] fullrun_mos2_xmm0031740101_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri May 24 06:01:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0031740101_pi300-10000_cl_pass1_src3.csv
[Fri May 24 06:01:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0031740101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0031740101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 06:01:48 2013] fullrun_mos2_xmm0031740101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri May 24 06:01:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0031740101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri May 24 06:01:48 2013] fullrun_mos2_xmm0031740101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri May 24 06:01:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0031740101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri May 24 06:01:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0031740101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0031740101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 06:01:59 2013] Warning, spatial fit 3 centroid is now closest to src. 4
[Fri May 24 06:01:59 2013] Spatial fit model total counts = 552.893000, observed total counts = 423.000000
[Fri May 24 06:01:59 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 24 06:01:59 2013] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 33.075785 pixels away
[Fri May 24 06:01:59 2013] Vigneting correction estimate = 1.000000
[Fri May 24 06:01:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 06:01:59 2013] Assessing source extent using major
[Fri May 24 06:01:59 2013] Source does appear to be extended
[Fri May 24 06:01:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 06:20:04 2013] XMMSAS src. selection expression = ellipse(29865.558441, 36982.799896, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 24 06:20:04 2013] Writing source region out to fullrun_mos2_xmm0031740101_pi300-10000_pass1_cl_src3_src.reg
[Fri May 24 06:20:04 2013] Extracting stamp from image fullrun_mos2_xmm0031740101_pi300-10000_cl_sm2.00.img.gz, (306, 388) - (381, 463)
[Fri May 24 06:20:04 2013] XMMSAS bgd. selection expression = annulus(29865.558441, 36982.799896, 1087.500000, 2175.000000, X, Y) && !ellipse(29748.025604, 37191.442719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30822.888000, 36305.504000, 1797.208052, 1797.208052, 0.000000, X, Y) && !ellipse(28083.959442, 38444.154572, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 24 06:20:04 2013] Writing fullrun_mos2_xmm0031740101_pi300-10000_pass1_cl_src3.gif
[Fri May 24 06:20:50 2013] Mean detx,y = (149.39, -13342.23) 
[Fri May 24 06:20:53 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 24 06:21:17 2013] Binned source spectrum to 10 counts/bin
[Fri May 24 06:21:17 2013] Setting source spectrum file to fullrun_mos2_xmm0031740101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri May 24 06:21:17 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0031740101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri May 24 06:36:45 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 24 06:36:45 2013] rmf not generated due to insufficient counts
[Fri May 24 06:45:45 2013] Updating aperture counts using extracted products
[Fri May 24 06:45:46 2013] Total counts from fullrun_mos2_xmm0031740101_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 377.00
[Fri May 24 06:45:46 2013] Total counts from fullrun_mos2_xmm0031740101_pi300-10000_pass1_cl_src3_bgd.pi.gz = 452.00
[Fri May 24 06:45:46 2013] Got source and background scale factors 1130998.000000, 5047282.000000
[Fri May 24 06:45:46 2013] User source parameters:
  Position = (343.8, 425.6) = 0 34 2.73 -5 24 22.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 275.7 +/- 20.4
  Background aperture counts = 101.3
  Rate = 0.009 +/- 0.0006

[Fri May 24 06:45:46 2013] Updating counts from extracted products
[Fri May 24 06:45:46 2013] Set source signif. to 275.72/10.06 = 27.40
[Fri May 24 06:45:50 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 24 06:45:50 2013] Using photon index=1.80, rate=0.0086, arf fullrun_mos2_xmm0031740101_pi300-10000_pass1_cl_src3.arf
[Fri May 24 06:45:50 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 24 06:45:50 2013] Updating source flux to 2.2e-13
[Fri May 24 06:45:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 24 06:45:59 2013] xmm0031740101/analysis//spectral/fullrun_mos2_xmm0031740101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete