[Thu May 24 10:21:36 2012] Detection parameters:
  Position = (268.2, 493.1) = 17 48 19.32 -28 15 45.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 44.3 +/- 9.4
  Background counts = 9.4
  Rate = 0.002 +/- 0.0003

[Thu May 24 10:21:37 2012] Off-axis axis estimate = 14.29'
[Thu May 24 10:49:18 2012] Using EEF radius (= 13.57 ")to estimate initial spatial extent for simple fitting
[Thu May 24 10:49:18 2012] Initial guess for spatial extent in simple fitting = 13.57"
[Thu May 24 10:49:18 2012] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.935
[Thu May 24 10:49:18 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 13.57"
[Thu May 24 11:14:14 2012] fullrun_mos2_xmm0030540101_pi300-10000_cl_pass0_src8.ximg exists
[Thu May 24 11:14:14 2012] fullrun_mos2_xmm0030540101_pi300-10000_cl_pass0_src8_1.ximg exists
[Thu May 24 11:14:14 2012] Fit fullrun_mos2_xmm0030540101_pi300-10000_cl_pass0_src8 appears to have run properly
[Thu May 24 11:14:14 2012] fullrun_mos2_xmm0030540101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Thu May 24 11:14:14 2012] fullrun_mos2_xmm0030540101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Thu May 24 11:14:14 2012] Fit fullrun_mos2_xmm0030540101_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Thu May 24 11:14:21 2012] Spatial fit model total counts = 179.339000, observed total counts = 178.000000
[Thu May 24 11:14:21 2012] Offset between fit and detection position for source 3 = 5.687870 pixels
[Thu May 24 11:14:21 2012] 171.540200 total counts/ 16.605200 bgd. counts: snr = 38.021345
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 5.687870 pixels
  Position = (273.9, 493.1) = 17 48 17.45 -28 15 47.0
  Extent = 27.1 (27.1-54.3)", rotation angle = 0
  Source counts = 154.9 +/- 13.1
  Background counts = 16.6
  Rate = 0.006 +/- 0.0005
[Thu May 24 11:14:21 2012] Vigneting correction estimate = 1.000000
[Thu May 24 11:14:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 11:14:21 2012] Assessing source extent using major axis lower bound
[Thu May 24 11:14:21 2012] Source does appear to be extended
[Thu May 24 11:14:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 11:14:21 2012] Source is confused with source 4
[Thu May 24 11:29:15 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 24 11:29:15 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 24 11:29:15 2012] Initial guess for spatial extent in simple fitting = 27.14"
[Thu May 24 11:29:15 2012] source mask rpix=6.2, npix_max = 181, mask sum = 196, frac = 1.079
[Thu May 24 11:29:15 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 27.14"
[Thu May 24 11:49:31 2012] fullrun_mos2_xmm0030540101_pi300-10000_cl_pass1_src8.ximg exists
[Thu May 24 11:49:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0030540101_pi300-10000_cl_pass1_src8.csv
[Thu May 24 11:49:31 2012] fullrun_mos2_xmm0030540101_pi300-10000_cl_pass1_src8_1.ximg exists
[Thu May 24 11:49:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0030540101_pi300-10000_cl_pass1_src8.csv
[Thu May 24 11:49:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0030540101_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0030540101_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 11:49:31 2012] fullrun_mos2_xmm0030540101_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Thu May 24 11:49:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0030540101_pi300-10000_cl_pass1_tfrozen_src8.csv
[Thu May 24 11:49:31 2012] fullrun_mos2_xmm0030540101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Thu May 24 11:49:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0030540101_pi300-10000_cl_pass1_tfrozen_src8.csv
[Thu May 24 11:49:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0030540101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0030540101_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 11:49:39 2012] Warning, spatial fit 8 centroid is now closest to src. 4
[Thu May 24 11:49:39 2012] Vigneting correction estimate = 1.000000
[Thu May 24 11:49:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 11:49:39 2012] Assessing source extent using major axis lower bound
[Thu May 24 11:49:39 2012] Source does appear to be extended
[Thu May 24 11:49:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 12:10:48 2012] XMMSAS src. selection expression = ellipse(23777.704000, 42854.095000, 1628.526047, 1628.526047, 0.000000, X, Y)
[Thu May 24 12:10:48 2012] Writing source region out to fullrun_mos2_xmm0030540101_pi300-10000_pass1_cl_src3_src.reg
[Thu May 24 12:10:48 2012] Extracting stamp from image fullrun_mos2_xmm0030540101_pi300-10000_cl_sm2.00.img.gz, (180, 400) - (367, 587)
[Thu May 24 12:10:48 2012] XMMSAS bgd. selection expression = annulus(23777.704000, 42854.095000, 2714.210078, 5428.420156, X, Y) && !ellipse(24663.471924, 42134.377136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27290.811920, 44075.025665, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 24 12:10:48 2012] Writing fullrun_mos2_xmm0030540101_pi300-10000_pass1_cl_src3.gif
[Thu May 24 12:14:18 2012] Mean detx,y = (3234.50, 15104.21) 
[Thu May 24 12:14:20 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 24 12:15:34 2012] Binned source spectrum to 10 counts/bin
[Thu May 24 12:15:35 2012] Setting source spectrum file to fullrun_mos2_xmm0030540101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu May 24 12:15:35 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0030540101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu May 24 12:22:35 2012] Updating aperture counts using extracted products
[Thu May 24 12:22:36 2012] Error reading totcts from fullrun_mos2_xmm0030540101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu May 24 12:22:36 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 24 12:22:36 2012] Using photon index=1.80, rate=0.00556, arf fullrun_mos2_xmm0030540101_pi300-10000_pass1_cl_src3.arf
[Thu May 24 12:22:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 24 12:22:36 2012] Updating source flux to 1.8e-13
[Thu May 24 12:22:53 2012] Flag c found in src. 3 procflags, skipping spectral fitting
[Thu May 24 12:23:47 2012] Reading fit data from xmm0030540101/analysis//spectral/fullrun_mos2_xmm0030540101_pi300-10000_pass1_cl_src3_pl.csv
[Thu May 24 12:23:47 2012] Spectral fit parameter nH value = 6.15266e+23
[Thu May 24 12:23:47 2012] Spectral fit parameter PhoIndex value = 6.30077
[Thu May 24 12:23:47 2012] Failed to get F(0.3-8.0) from xmm0030540101/analysis//spectral/fullrun_mos2_xmm0030540101_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Thu May 24 12:23:47 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 24 12:23:47 2012] Using Nh = 6.2e+23, photon index=6.30, rate=0.00556, arf fullrun_mos2_xmm0030540101_pi300-10000_pass1_cl_src3.arf
[Thu May 24 12:23:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 24 12:23:47 2012] Updating source flux to 6.2e-13