[Thu May 24 10:21:08 2012] Detection parameters:
  Position = (208.7, 269.9) = 17 48 38.99 -28 31 57.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 274.6 +/- 20.4
  Background counts = 12.4
  Rate = 0.02 +/- 0.001

[Thu May 24 10:21:08 2012] Off-axis axis estimate = 6.83'
[Thu May 24 10:31:40 2012] Using EEF radius (= 9.84 ")to estimate initial spatial extent for simple fitting
[Thu May 24 10:31:40 2012] Initial guess for spatial extent in simple fitting = 9.84"
[Thu May 24 10:31:40 2012] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.983
[Thu May 24 10:31:40 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.84"
[Thu May 24 10:49:18 2012] fullrun_mos1_xmm0030540101_pi300-10000_cl_pass0_src1.ximg exists
[Thu May 24 10:49:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0030540101_pi300-10000_cl_pass0_src1.csv
[Thu May 24 10:49:18 2012] fullrun_mos1_xmm0030540101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu May 24 10:49:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0030540101_pi300-10000_cl_pass0_src1.csv
[Thu May 24 10:49:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0030540101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0030540101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 10:49:18 2012] fullrun_mos1_xmm0030540101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu May 24 10:49:18 2012] fullrun_mos1_xmm0030540101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu May 24 10:49:18 2012] Fit fullrun_mos1_xmm0030540101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu May 24 11:14:18 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 12.439497 pixels away
[Thu May 24 11:14:18 2012] Vigneting correction estimate = 1.000000
[Thu May 24 11:14:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 11:14:18 2012] Assessing source extent using major
[Thu May 24 11:14:18 2012] Source does appear to be extended
[Thu May 24 11:14:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 11:15:36 2012] Using EEF radius (= 9.84 ")to estimate initial spatial extent for simple fitting
[Thu May 24 11:15:36 2012] Initial guess for spatial extent in simple fitting = 9.84"
[Thu May 24 11:15:36 2012] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.983
[Thu May 24 11:15:36 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 9.84"
[Thu May 24 11:29:14 2012] fullrun_mos1_xmm0030540101_pi300-10000_cl_pass1_src1.ximg exists
[Thu May 24 11:29:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0030540101_pi300-10000_cl_pass1_src1.csv
[Thu May 24 11:29:14 2012] fullrun_mos1_xmm0030540101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu May 24 11:29:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0030540101_pi300-10000_cl_pass1_src1.csv
[Thu May 24 11:29:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0030540101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0030540101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 24 11:29:14 2012] fullrun_mos1_xmm0030540101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu May 24 11:29:14 2012] fullrun_mos1_xmm0030540101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu May 24 11:29:14 2012] Fit fullrun_mos1_xmm0030540101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu May 24 11:49:35 2012] Spatial fit model total counts = 427.000000, observed total counts = 427.000000
[Thu May 24 11:49:35 2012] Offset between fit and detection position for source 1 = 0.123094 pixels
[Thu May 24 11:49:35 2012] 429.439000 total counts/ 230.540000 bgd. counts: snr = 13.099643
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.123094 pixels
  Position = (208.6, 269.7) = 17 48 39.00 -28 31 58.5
  Extent = 6.1 (5.4-7.0)", rotation angle = 0
  Source counts = 198.9 +/- 20.7
  Background counts = 230.5
  Rate = 0.007 +/- 0.0007
[Thu May 24 11:49:35 2012] Vigneting correction estimate = 1.000000
[Thu May 24 11:49:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 24 11:49:35 2012] Assessing source extent using major axis lower bound
[Thu May 24 11:49:35 2012] Source does appear to be extended
[Thu May 24 11:49:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 24 11:58:53 2012] XMMSAS src. selection expression = ellipse(18102.294400, 23419.193400, 365.247611, 365.247611, 0.000000, X, Y)
[Thu May 24 11:58:53 2012] Writing source region out to fullrun_mos1_xmm0030540101_pi300-10000_pass1_cl_src1_src.reg
[Thu May 24 11:58:53 2012] Extracting stamp from image fullrun_mos1_xmm0030540101_pi300-10000_cl_sm2.00.img.gz, (188, 249) - (230, 291)
[Thu May 24 11:58:53 2012] XMMSAS bgd. selection expression = annulus(18102.294400, 23419.193400, 608.746018, 1217.492035, X, Y)
[Thu May 24 11:58:53 2012] Writing fullrun_mos1_xmm0030540101_pi300-10000_pass1_cl_src1.gif
[Thu May 24 11:58:57 2012] Mean detx,y = (-3871.64, -9193.40) 
[Thu May 24 11:58:59 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 24 11:59:12 2012] Binned source spectrum to 10 counts/bin
[Thu May 24 11:59:13 2012] Setting source spectrum file to fullrun_mos1_xmm0030540101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May 24 11:59:13 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0030540101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu May 24 12:22:33 2012] Updating aperture counts using extracted products
[Thu May 24 12:22:33 2012] Error reading totcts from fullrun_mos1_xmm0030540101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu May 24 12:22:34 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 24 12:22:34 2012] Using photon index=1.80, rate=0.00714, arf fullrun_mos1_xmm0030540101_pi300-10000_pass1_cl_src1.arf
[Thu May 24 12:22:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 24 12:22:34 2012] Updating source flux to 1.9e-13
[Thu May 24 12:22:53 2012] Reading fit data from xmm0030540101/analysis//spectral/fullrun_mos1_xmm0030540101_pi300-10000_pass1_cl_src1_pl.csv
[Thu May 24 12:22:53 2012] Spectral fit parameter nH value = 3.93784e+22
[Thu May 24 12:22:53 2012] Spectral fit parameter PhoIndex value = 0.279413
[Thu May 24 12:22:53 2012] Failed to get F(0.3-8.0) from xmm0030540101/analysis//spectral/fullrun_mos1_xmm0030540101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu May 24 12:22:53 2012] Calculating source flux in energy range 0.30-8.00
[Thu May 24 12:22:53 2012] Using Nh = 3.9e+22, photon index=0.28, rate=0.00714, arf fullrun_mos1_xmm0030540101_pi300-10000_pass1_cl_src1.arf
[Thu May 24 12:22:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 24 12:22:53 2012] Updating source flux to 5.9e-13