[Sat May 4 01:03:18 2013] Detection parameters: Position = (291.3, 293.3) = 12 57 26.34 -30 24 5.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 76.8 +/- 19.0 Background counts = 140.5 Rate = 0.007 +/- 0.002 [Sat May 4 01:03:19 2013] Off-axis axis estimate = 0.64' [Sat May 4 01:06:14 2013] Using EEF radius (= 6.75 ")to estimate initial spatial extent for simple fitting [Sat May 4 01:06:14 2013] Initial guess for spatial extent in simple fitting = 6.75" [Sat May 4 01:06:14 2013] source mask rpix=1.6, npix_max = 16, mask sum = 13, frac = 0.772 [Sat May 4 01:06:14 2013] Giving source the simple spatial ID 39 for pass 0, mean size = 6.75" [Sat May 4 03:55:35 2013] fullrun_pn_xmm0030140301_pi300-10000_cl_pass0_src39.ximg exists [Sat May 4 03:55:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0030140301_pi300-10000_cl_pass0_src39.csv [Sat May 4 03:55:35 2013] fullrun_pn_xmm0030140301_pi300-10000_cl_pass0_src39_1.ximg exists [Sat May 4 03:55:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0030140301_pi300-10000_cl_pass0_src39.csv [Sat May 4 03:55:35 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0030140301_pi300-10000_cl_pass0_src39_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0030140301_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 4 03:55:36 2013] fullrun_pn_xmm0030140301_pi300-10000_cl_pass0_tfrozen_src39.ximg exists [Sat May 4 03:55:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0030140301_pi300-10000_cl_pass0_tfrozen_src39.csv [Sat May 4 03:55:36 2013] fullrun_pn_xmm0030140301_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists [Sat May 4 03:55:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0030140301_pi300-10000_cl_pass0_tfrozen_src39.csv [Sat May 4 03:55:36 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0030140301_pi300-10000_cl_pass0_tfrozen_src39_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0030140301_pi300-10000_cl_pass0_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 4 06:28:12 2013] Source 40 is offset by 5.931688 and -0.259716 pixels which is larger than 2 X fitted extent = 0.786303 x 0.786303, not incorporating fit results [Sat May 4 06:28:12 2013] Spatial fit model total counts = 1755.730000, observed total counts = 1757.000000 [Sat May 4 06:28:12 2013] Offset between fit and detection position for source 40 = 2.507392 pixels [Sat May 4 06:28:12 2013] Warning, changing simple spatial fit ID from 39 to 41 [Sat May 4 06:28:12 2013] 1796.550000 total counts/ 1682.400000 bgd. counts: snr = 2.782988 Spatial fit parameters: Offset between fit and detection position for source 40 = 2.507392 pixels Position = (293.4, 294.6) = 12 57 25.64 -30 23 58.4 Extent = 13.0 (13.0-26.0)", rotation angle = 0 Source counts = 114.2 +/- 42.4 Background counts = 1682.4 Rate = 0.01 +/- 0.004 [Sat May 4 06:28:12 2013] Vigneting correction estimate = 1.000000 [Sat May 4 06:28:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat May 4 06:28:12 2013] Assessing source extent using major axis lower bound [Sat May 4 06:28:12 2013] Source does appear to be extended [Sat May 4 06:28:12 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat May 4 06:28:12 2013] Source is confused with source 42 [Sat May 4 06:28:33 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Sat May 4 06:28:33 2013] Initial guess for spatial extent in simple fitting = 12.99" [Sat May 4 06:28:33 2013] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.007 [Sat May 4 06:28:33 2013] Giving source the simple spatial ID 32 for pass 1, mean size = 12.99" [Sat May 4 08:41:27 2013] fullrun_pn_xmm0030140301_pi300-10000_cl_pass1_src32.ximg exists [Sat May 4 08:41:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0030140301_pi300-10000_cl_pass1_src32.csv [Sat May 4 08:41:27 2013] fullrun_pn_xmm0030140301_pi300-10000_cl_pass1_src32_1.ximg exists [Sat May 4 08:41:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0030140301_pi300-10000_cl_pass1_src32.csv [Sat May 4 08:41:27 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0030140301_pi300-10000_cl_pass1_src32_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0030140301_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 4 08:41:28 2013] fullrun_pn_xmm0030140301_pi300-10000_cl_pass1_tfrozen_src32.ximg exists [Sat May 4 08:41:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0030140301_pi300-10000_cl_pass1_tfrozen_src32.csv [Sat May 4 08:41:28 2013] fullrun_pn_xmm0030140301_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists [Sat May 4 08:41:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0030140301_pi300-10000_cl_pass1_tfrozen_src32.csv [Sat May 4 08:41:28 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0030140301_pi300-10000_cl_pass1_tfrozen_src32_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0030140301_pi300-10000_cl_pass1_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 4 10:38:43 2013] Warning, spatial fit 32 centroid is now closest to src. 34 [Sat May 4 10:38:43 2013] Spatial fit model total counts = 1757.540000, observed total counts = 1757.000000 [Sat May 4 10:38:43 2013] Offset between fit and detection position for source 40 = 0.081732 pixels [Sat May 4 10:38:43 2013] Warning, changing simple spatial fit ID from 32 to 34 [Sat May 4 10:38:43 2013] 1797.549000 total counts/ 1683.970000 bgd. counts: snr = 2.767776 Spatial fit parameters: Offset between fit and detection position for source 40 = 0.081732 pixels Position = (293.4, 294.6) = 12 57 25.65 -30 23 58.7 Extent = 13.0 (12.7-26.0)", rotation angle = 0 Source counts = 113.6 +/- 42.4 Background counts = 1684.0 Rate = 0.01 +/- 0.004 [Sat May 4 10:38:43 2013] Vigneting correction estimate = 1.000000 [Sat May 4 10:38:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat May 4 10:38:43 2013] Assessing source extent using major axis lower bound [Sat May 4 10:38:43 2013] Source does appear to be extended [Sat May 4 10:38:43 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat May 4 10:39:02 2013] XMMSAS src. selection expression = ellipse(25475.098000, 25579.046000, 779.604022, 779.604022, 0.000000, X, Y) [Sat May 4 10:39:02 2013] Writing source region out to fullrun_pn_xmm0030140301_pi300-10000_pass1_cl_src40_src.reg [Sat May 4 10:39:02 2013] Extracting stamp from image fullrun_pn_xmm0030140301_pi300-10000_cl_sm2.00.img.gz, (249, 250) - (338, 339) [Sat May 4 10:39:03 2013] XMMSAS bgd. selection expression = annulus(25475.098000, 25579.046000, 1299.340037, 2598.680075, X, Y) && !ellipse(26461.471039, 28143.471924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28052.080505, 28919.818420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25176.274000, 28924.882000, 1124.368032, 1124.368032, 0.000000, X, Y) && !ellipse(24426.932709, 28537.765015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26940.610901, 28395.041260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27682.306610, 27964.945099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28942.888000, 28164.908000, 1258.880036, 1258.880036, 0.000000, X, Y) && !ellipse(28750.548000, 27180.316000, 1243.632036, 1243.632036, 0.000000, X, Y) && !ellipse(24959.215637, 27791.781433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25222.475067, 27268.281342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24671.572418, 27113.025848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27851.678894, 26934.520264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25200.456909, 26837.972778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26403.455994, 27366.190857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25848.578766, 26411.460907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24849.130157, 26417.785187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26892.602661, 26841.437592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28212.885010, 25878.397400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27454.744049, 25607.610962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25765.096680, 25979.660217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26562.574554, 25889.075928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28049.996307, 24474.056824, 870.000000, 870.000000, 0.000000, X, Y) [Sat May 4 10:39:03 2013] Writing fullrun_pn_xmm0030140301_pi300-10000_pass1_cl_src40.gif [Sat May 4 10:54:04 2013] Mean detx,y = (-1481.04, 1594.58) [Sat May 4 10:54:06 2013] Setting backscal keywords in source and bgd. spectrum [Sat May 4 10:54:26 2013] Binned source spectrum to 10 counts/bin [Sat May 4 10:54:27 2013] Setting source spectrum file to fullrun_pn_xmm0030140301_pi300-10000_pass1_cl_src40_src_b10.pi.gz [Sat May 4 10:54:27 2013] Setting bgd. spectrum file to fullrun_pn_xmm0030140301_pi300-10000_pass1_cl_src40_bgd.pi.gz [Sat May 4 12:15:50 2013] Updating aperture counts using extracted products [Sat May 4 12:15:50 2013] Total counts from fullrun_pn_xmm0030140301_pi300-10000_pass1_cl_src40_src_b10.pi.gz = 1242.00 [Sat May 4 12:15:50 2013] Total counts from fullrun_pn_xmm0030140301_pi300-10000_pass1_cl_src40_bgd.pi.gz = 3543.00 [Sat May 4 12:15:50 2013] Got source and background scale factors 1646768.000000, 7048519.000000 [Sat May 4 12:15:50 2013] User source parameters: Position = (293.4, 294.6) = 12 57 25.65 -30 23 58.7 Extent = 13.0 (12.7-26.0)", rotation angle = 0 Source aperture counts = 414.2 +/- 36.3 Background aperture counts = 827.8 Rate = 0.04 +/- 0.003 [Sat May 4 12:15:52 2013] Calculating source flux in energy range 0.30-8.00 [Sat May 4 12:15:52 2013] Using photon index=1.80, rate=0.00981, arf fullrun_pn_xmm0030140301_pi300-10000_pass1_cl_src40.arf [Sat May 4 12:15:52 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat May 4 12:15:52 2013] Updating source flux to 3.4e-14 [Sat May 4 12:16:03 2013] Flag b found in src. 40 procflags, skipping spectral fitting [Sat May 4 12:16:03 2013] Flag c found in src. 40 procflags, skipping spectral fitting [Sat May 4 12:16:07 2013] xmm0030140301/analysis//spectral/fullrun_pn_xmm0030140301_pi300-10000_pass1_cl_src40_pl.csv not found, spectral fit skipped or did not complete