[Sat May 4 01:03:17 2013] Detection parameters: Position = (304.7, 324.0) = 12 57 21.84 -30 21 48.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 580.5 +/- 37.1 Background counts = 187.1 Rate = 0.04 +/- 0.003 [Sat May 4 01:03:19 2013] Off-axis axis estimate = 1.91' [Sat May 4 01:06:14 2013] Using EEF radius (= 7.38 ")to estimate initial spatial extent for simple fitting [Sat May 4 01:06:14 2013] Initial guess for spatial extent in simple fitting = 7.38" [Sat May 4 01:06:14 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.828 [Sat May 4 01:06:14 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 7.38" [Sat May 4 03:55:34 2013] fullrun_pn_xmm0030140301_pi300-10000_cl_pass0_src2.ximg exists [Sat May 4 03:55:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0030140301_pi300-10000_cl_pass0_src2.csv [Sat May 4 03:55:34 2013] fullrun_pn_xmm0030140301_pi300-10000_cl_pass0_src2_1.ximg exists [Sat May 4 03:55:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0030140301_pi300-10000_cl_pass0_src2.csv [Sat May 4 03:55:34 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0030140301_pi300-10000_cl_pass0_src2_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0030140301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 4 03:55:35 2013] fullrun_pn_xmm0030140301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists [Sat May 4 03:55:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0030140301_pi300-10000_cl_pass0_tfrozen_src2.csv [Sat May 4 03:55:35 2013] fullrun_pn_xmm0030140301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists [Sat May 4 03:55:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0030140301_pi300-10000_cl_pass0_tfrozen_src2.csv [Sat May 4 03:55:35 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0030140301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0030140301_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 4 06:28:12 2013] Spatial fit model total counts = 3452.050000, observed total counts = 3053.000000 [Sat May 4 06:28:12 2013] Poor agreement between spatial fit and data for source 2 It may help to tweak spatial fit manually Not incorporating fit results [Sat May 4 06:28:12 2013] Source 2 is offset by -4.899790 and 2.984988 pixels which is larger than 2 X fitted extent = 0.867756 x 0.867756, not incorporating fit results [Sat May 4 06:28:12 2013] Vigneting correction estimate = 1.000000 [Sat May 4 06:28:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat May 4 06:28:12 2013] Assessing source extent using major [Sat May 4 06:28:12 2013] Source does appear to be extended [Sat May 4 06:28:12 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat May 4 06:28:12 2013] Source is confused with source 17 [Sat May 4 06:28:33 2013] Using EEF radius (= 7.38 ")to estimate initial spatial extent for simple fitting [Sat May 4 06:28:33 2013] Initial guess for spatial extent in simple fitting = 7.38" [Sat May 4 06:28:33 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.828 [Sat May 4 06:28:33 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 7.38" [Sat May 4 08:41:26 2013] fullrun_pn_xmm0030140301_pi300-10000_cl_pass1_src2.ximg exists [Sat May 4 08:41:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0030140301_pi300-10000_cl_pass1_src2.csv [Sat May 4 08:41:26 2013] fullrun_pn_xmm0030140301_pi300-10000_cl_pass1_src2_1.ximg exists [Sat May 4 08:41:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0030140301_pi300-10000_cl_pass1_src2.csv [Sat May 4 08:41:26 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0030140301_pi300-10000_cl_pass1_src2_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0030140301_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 4 08:41:27 2013] fullrun_pn_xmm0030140301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists [Sat May 4 08:41:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0030140301_pi300-10000_cl_pass1_tfrozen_src2.csv [Sat May 4 08:41:27 2013] fullrun_pn_xmm0030140301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists [Sat May 4 08:41:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0030140301_pi300-10000_cl_pass1_tfrozen_src2.csv [Sat May 4 08:41:27 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0030140301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0030140301_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 4 10:38:43 2013] Spatial fit model total counts = 3450.500000, observed total counts = 3053.000000 [Sat May 4 10:38:43 2013] Poor agreement between spatial fit and data for source 2 It may help to tweak spatial fit manually Not incorporating fit results [Sat May 4 10:38:43 2013] Vigneting correction estimate = 1.000000 [Sat May 4 10:38:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat May 4 10:38:43 2013] Assessing source extent using major [Sat May 4 10:38:43 2013] Source does appear to be extended [Sat May 4 10:38:43 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat May 4 10:39:01 2013] XMMSAS src. selection expression = ellipse(26461.471039, 28143.471924, 652.500000, 652.500000, 0.000000, X, Y) [Sat May 4 10:39:01 2013] Writing source region out to fullrun_pn_xmm0030140301_pi300-10000_pass1_cl_src2_src.reg [Sat May 4 10:39:01 2013] Extracting stamp from image fullrun_pn_xmm0030140301_pi300-10000_cl_sm2.00.img.gz, (267, 287) - (342, 362) [Sat May 4 10:39:01 2013] XMMSAS bgd. selection expression = annulus(26461.471039, 28143.471924, 1087.500000, 2175.000000, X, Y) && !ellipse(26610.309326, 29550.794098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25513.782227, 29332.760437, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24891.010590, 29380.335907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26224.294617, 29237.288239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28052.080505, 28919.818420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25176.274000, 28924.882000, 1124.368032, 1124.368032, 0.000000, X, Y) && !ellipse(24426.932709, 28537.765015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26940.610901, 28395.041260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27682.306610, 27964.945099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28942.888000, 28164.908000, 1258.880036, 1258.880036, 0.000000, X, Y) && !ellipse(28750.548000, 27180.316000, 1243.632036, 1243.632036, 0.000000, X, Y) && !ellipse(24959.215637, 27791.781433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25222.475067, 27268.281342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24671.572418, 27113.025848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27851.678894, 26934.520264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25200.456909, 26837.972778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29123.732635, 26735.108978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26403.455994, 27366.190857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25848.578766, 26411.460907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24849.130157, 26417.785187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29407.942000, 25637.016000, 1225.584035, 1225.584035, 0.000000, X, Y) && !ellipse(26892.602661, 26841.437592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28212.885010, 25878.397400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25475.098000, 25579.046000, 1039.472030, 1039.472030, 0.000000, X, Y) && !ellipse(27454.744049, 25607.610962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25765.096680, 25979.660217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26562.574554, 25889.075928, 870.000000, 870.000000, 0.000000, X, Y) [Sat May 4 10:39:01 2013] Writing fullrun_pn_xmm0030140301_pi300-10000_pass1_cl_src2.gif [Sat May 4 10:39:45 2013] Mean detx,y = (196.81, -419.69) [Sat May 4 10:39:47 2013] Setting backscal keywords in source and bgd. spectrum [Sat May 4 10:40:01 2013] Binned source spectrum to 10 counts/bin [Sat May 4 10:40:01 2013] Setting source spectrum file to fullrun_pn_xmm0030140301_pi300-10000_pass1_cl_src2_src_b10.pi.gz [Sat May 4 10:40:01 2013] Setting bgd. spectrum file to fullrun_pn_xmm0030140301_pi300-10000_pass1_cl_src2_bgd.pi.gz [Sat May 4 10:59:24 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sat May 4 10:59:24 2013] rmf not generated due to insufficient counts [Sat May 4 12:15:44 2013] Updating aperture counts using extracted products [Sat May 4 12:15:44 2013] Total counts from fullrun_pn_xmm0030140301_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 2397.00 [Sat May 4 12:15:44 2013] Total counts from fullrun_pn_xmm0030140301_pi300-10000_pass1_cl_src2_bgd.pi.gz = 127.00 [Sat May 4 12:15:44 2013] Got source and background scale factors 1286876.000000, 170783.000000 [Sat May 4 12:15:44 2013] User source parameters: Position = (304.7, 324.0) = 12 57 21.84 -30 21 48.8 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 1440.0 +/- 50.0 Background aperture counts = 957.0 Rate = 0.1 +/- 0.004 [Sat May 4 12:15:44 2013] Updating counts from extracted products [Sat May 4 12:15:44 2013] Set source signif. to 1440.04/30.93 = 46.55 [Sat May 4 12:15:51 2013] Calculating source flux in energy range 0.30-8.00 [Sat May 4 12:15:51 2013] Using photon index=1.80, rate=0.124, arf fullrun_pn_xmm0030140301_pi300-10000_pass1_cl_src2.arf [Sat May 4 12:15:51 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat May 4 12:15:51 2013] Updating source flux to 3.7e-13 [Sat May 4 12:16:03 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sat May 4 12:16:07 2013] xmm0030140301/analysis//spectral/fullrun_pn_xmm0030140301_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete