[Sat May 4 01:04:10 2013] Detection parameters: Position = (321.8, 304.1) = 12 57 16.08 -30 23 19.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 65.8 +/- 14.1 Background counts = 62.6 Rate = 0.004 +/- 0.0009 [Sat May 4 01:04:10 2013] Off-axis axis estimate = 1.75' [Sat May 4 05:07:54 2013] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting [Sat May 4 05:07:54 2013] Initial guess for spatial extent in simple fitting = 7.30" [Sat May 4 05:07:54 2013] source mask rpix=1.7, npix_max = 18, mask sum = 14, frac = 0.738 [Sat May 4 05:07:54 2013] Giving source the simple spatial ID 22 for pass 0, mean size = 7.30" [Sat May 4 06:27:59 2013] fullrun_mos2_xmm0030140301_pi300-10000_cl_pass0_src22.ximg exists [Sat May 4 06:27:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0030140301_pi300-10000_cl_pass0_src22.csv [Sat May 4 06:27:59 2013] fullrun_mos2_xmm0030140301_pi300-10000_cl_pass0_src22_1.ximg exists [Sat May 4 06:27:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0030140301_pi300-10000_cl_pass0_src22.csv [Sat May 4 06:27:59 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0030140301_pi300-10000_cl_pass0_src22_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0030140301_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 4 06:28:00 2013] fullrun_mos2_xmm0030140301_pi300-10000_cl_pass0_tfrozen_src22.ximg exists [Sat May 4 06:28:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0030140301_pi300-10000_cl_pass0_tfrozen_src22.csv [Sat May 4 06:28:00 2013] fullrun_mos2_xmm0030140301_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists [Sat May 4 06:28:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0030140301_pi300-10000_cl_pass0_tfrozen_src22.csv [Sat May 4 06:28:00 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0030140301_pi300-10000_cl_pass0_tfrozen_src22_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0030140301_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 4 06:28:23 2013] Spatial fit model total counts = 947.761000, observed total counts = 854.000000 [Sat May 4 06:28:23 2013] Poor agreement between spatial fit and data for source 28 It may help to tweak spatial fit manually Not incorporating fit results [Sat May 4 06:28:23 2013] Vigneting correction estimate = 1.000000 [Sat May 4 06:28:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat May 4 06:28:23 2013] Assessing source extent using major [Sat May 4 06:28:23 2013] Source does appear to be extended [Sat May 4 06:28:23 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat May 4 09:38:52 2013] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting [Sat May 4 09:38:52 2013] Initial guess for spatial extent in simple fitting = 7.30" [Sat May 4 09:38:52 2013] source mask rpix=1.7, npix_max = 18, mask sum = 14, frac = 0.738 [Sat May 4 09:38:52 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 7.30" [Sat May 4 10:38:33 2013] fullrun_mos2_xmm0030140301_pi300-10000_cl_pass1_src17.ximg exists [Sat May 4 10:38:33 2013] fullrun_mos2_xmm0030140301_pi300-10000_cl_pass1_src17_1.ximg exists [Sat May 4 10:38:33 2013] Fit fullrun_mos2_xmm0030140301_pi300-10000_cl_pass1_src17 appears to have run properly [Sat May 4 10:38:33 2013] fullrun_mos2_xmm0030140301_pi300-10000_cl_pass1_tfrozen_src17.ximg exists [Sat May 4 10:38:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0030140301_pi300-10000_cl_pass1_tfrozen_src17.csv [Sat May 4 10:38:33 2013] fullrun_mos2_xmm0030140301_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists [Sat May 4 10:38:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0030140301_pi300-10000_cl_pass1_tfrozen_src17.csv [Sat May 4 10:38:33 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0030140301_pi300-10000_cl_pass1_tfrozen_src17_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0030140301_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 4 10:38:52 2013] Source 28 is offset by 0.509956 and 4.906606 pixels which is larger than 2 X fitted extent = 1.654152 x 1.654152, not incorporating fit results [Sat May 4 10:38:52 2013] Spatial fit model total counts = 939.900000, observed total counts = 854.000000 [Sat May 4 10:38:52 2013] Poor agreement between spatial fit and data for source 28 It may help to tweak spatial fit manually Not incorporating fit results [Sat May 4 10:38:52 2013] Vigneting correction estimate = 1.000000 [Sat May 4 10:38:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat May 4 10:38:52 2013] Assessing source extent using major [Sat May 4 10:38:52 2013] Source does appear to be extended [Sat May 4 10:38:52 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat May 4 12:03:45 2013] XMMSAS src. selection expression = ellipse(27952.384155, 26404.204712, 652.500000, 652.500000, 0.000000, X, Y) [Sat May 4 12:03:45 2013] Writing source region out to fullrun_mos2_xmm0030140301_pi300-10000_pass1_cl_src28_src.reg [Sat May 4 12:03:45 2013] Extracting stamp from image fullrun_mos2_xmm0030140301_pi300-10000_cl_sm2.00.img.gz, (284, 267) - (359, 342) [Sat May 4 12:03:45 2013] XMMSAS bgd. selection expression = annulus(27952.384155, 26404.204712, 1087.500000, 2175.000000, X, Y) && !ellipse(26423.865204, 28215.845367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27262.089813, 28424.817413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26980.008881, 28837.377106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26265.171448, 29337.552765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25783.063263, 27885.764160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26061.135101, 27451.443848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25539.594421, 28495.425262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27313.138062, 27885.485382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27503.593933, 27467.846619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27574.828369, 29274.105530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26864.581800, 26434.264000, 1123.200032, 1123.200032, 0.000000, X, Y) && !ellipse(29039.400940, 28963.668884, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(27068.654999, 26743.095306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27889.478546, 28444.100891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28147.563324, 27367.579437, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25042.764099, 26999.406525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26850.485931, 29374.338196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25123.230072, 29217.136566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28715.641357, 27411.204224, 870.000000, 870.000000, 0.000000, X, Y) [Sat May 4 12:03:45 2013] Writing fullrun_mos2_xmm0030140301_pi300-10000_pass1_cl_src28.gif [Sat May 4 12:07:32 2013] Mean detx,y = (-940.30, -1815.54) [Sat May 4 12:07:33 2013] Setting backscal keywords in source and bgd. spectrum [Sat May 4 12:07:43 2013] Binned source spectrum to 10 counts/bin [Sat May 4 12:07:43 2013] Setting source spectrum file to fullrun_mos2_xmm0030140301_pi300-10000_pass1_cl_src28_src_b10.pi.gz [Sat May 4 12:07:43 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0030140301_pi300-10000_pass1_cl_src28_bgd.pi.gz [Sat May 4 12:14:39 2013] Not generating rmf since there are only 65 counts [Sat May 4 12:14:39 2013] rmf not generated due to insufficient counts [Sat May 4 12:15:58 2013] Updating aperture counts using extracted products [Sat May 4 12:15:58 2013] Total counts from fullrun_mos2_xmm0030140301_pi300-10000_pass1_cl_src28_src_b10.pi.gz = 587.00 [Sat May 4 12:15:58 2013] Total counts from fullrun_mos2_xmm0030140301_pi300-10000_pass1_cl_src28_bgd.pi.gz = 1763.00 [Sat May 4 12:15:58 2013] Got source and background scale factors 1175608.000000, 4954108.000000 [Sat May 4 12:15:58 2013] User source parameters: Position = (321.8, 304.1) = 12 57 16.08 -30 23 19.2 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 168.6 +/- 25.2 Background aperture counts = 418.4 Rate = 0.01 +/- 0.002 [Sat May 4 12:15:58 2013] Updating counts from extracted products [Sat May 4 12:15:58 2013] Set source signif. to 168.64/20.45 = 8.24 [Sat May 4 12:15:59 2013] Calculating source flux in energy range 0.30-8.00 [Sat May 4 12:15:59 2013] Using photon index=1.80, rate=0.0101, arf fullrun_mos2_xmm0030140301_pi300-10000_pass1_cl_src28.arf [Sat May 4 12:15:59 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat May 4 12:15:59 2013] Updating source flux to 1.1e-13 [Sat May 4 12:16:02 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sat May 4 12:16:03 2013] xmm0030140301/analysis//spectral/fullrun_mos2_xmm0030140301_pi300-10000_pass1_cl_src28_pl.csv not found, spectral fit skipped or did not complete