[Tue May 22 02:48:30 2012] Detection parameters:
  Position = (244.5, 306.7) = 12 54 49.30 -29 6 15.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 90.0 +/- 12.6
  Background counts = 13.2
  Rate = 0.006 +/- 0.0009

[Tue May 22 02:48:30 2012] Off-axis axis estimate = 3.95'
[Tue May 22 05:38:44 2012] Using EEF radius (= 8.41 ")to estimate initial spatial extent for simple fitting
[Tue May 22 05:38:44 2012] Initial guess for spatial extent in simple fitting = 8.41"
[Tue May 22 05:38:44 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.056
[Tue May 22 05:38:44 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 8.41"
[Tue May 22 07:42:22 2012] fullrun_mos2_xmm0030140101_pi300-10000_cl_pass0_src18.ximg exists
[Tue May 22 07:42:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0030140101_pi300-10000_cl_pass0_src18.csv
[Tue May 22 07:42:22 2012] fullrun_mos2_xmm0030140101_pi300-10000_cl_pass0_src18_1.ximg exists
[Tue May 22 07:42:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0030140101_pi300-10000_cl_pass0_src18.csv
[Tue May 22 07:42:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0030140101_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0030140101_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 07:42:23 2012] fullrun_mos2_xmm0030140101_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Tue May 22 07:42:23 2012] fullrun_mos2_xmm0030140101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Tue May 22 07:42:23 2012] Fit fullrun_mos2_xmm0030140101_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Tue May 22 07:42:45 2012] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 11.092558 pixels away
[Tue May 22 07:42:45 2012] Vigneting correction estimate = 1.000000
[Tue May 22 07:42:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 07:42:45 2012] Assessing source extent using major
[Tue May 22 07:42:45 2012] Source does appear to be extended
[Tue May 22 07:42:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 22 10:29:55 2012] Using EEF radius (= 8.41 ")to estimate initial spatial extent for simple fitting
[Tue May 22 10:29:55 2012] Initial guess for spatial extent in simple fitting = 8.41"
[Tue May 22 10:29:55 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.056
[Tue May 22 10:29:55 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 8.41"
[Tue May 22 12:54:56 2012] fullrun_mos2_xmm0030140101_pi300-10000_cl_pass1_src17.ximg exists
[Tue May 22 12:54:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0030140101_pi300-10000_cl_pass1_src17.csv
[Tue May 22 12:54:56 2012] fullrun_mos2_xmm0030140101_pi300-10000_cl_pass1_src17_1.ximg exists
[Tue May 22 12:54:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0030140101_pi300-10000_cl_pass1_src17.csv
[Tue May 22 12:54:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0030140101_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0030140101_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 12:54:56 2012] fullrun_mos2_xmm0030140101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Tue May 22 12:54:56 2012] fullrun_mos2_xmm0030140101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Tue May 22 12:54:56 2012] Fit fullrun_mos2_xmm0030140101_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Tue May 22 12:55:23 2012] Spatial fit model total counts = 187.000000, observed total counts = 187.000000
[Tue May 22 12:55:23 2012] Offset between fit and detection position for source 29 = 0.135979 pixels
[Tue May 22 12:55:23 2012] 186.931400 total counts/ 126.254000 bgd. counts: snr = 5.400132
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.135979 pixels
  Position = (244.5, 306.6) = 12 54 49.31 -29 6 16.4
  Extent = 4.7 (3.7-5.8)", rotation angle = 0
  Source counts = 60.7 +/- 13.7
  Background counts = 126.3
  Rate = 0.004 +/- 0.0008
[Tue May 22 12:55:23 2012] Vigneting correction estimate = 1.000000
[Tue May 22 12:55:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 12:55:23 2012] Assessing source extent using major axis lower bound
[Tue May 22 12:55:23 2012] Source does appear to be extended
[Tue May 22 12:55:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 22 15:00:07 2012] XMMSAS src. selection expression = ellipse(21220.587400, 26622.430400, 281.778008, 281.778008, 0.000000, X, Y)
[Tue May 22 15:00:07 2012] Writing source region out to fullrun_mos2_xmm0030140101_pi300-10000_pass1_cl_src29_src.reg
[Tue May 22 15:00:07 2012] Extracting stamp from image fullrun_mos2_xmm0030140101_pi300-10000_cl_sm2.00.img.gz, (228, 290) - (261, 323)
[Tue May 22 15:00:07 2012] XMMSAS bgd. selection expression = annulus(21220.587400, 26622.430400, 469.630014, 939.260027, X, Y) && !ellipse(22228.289280, 27780.762000, 519.038415, 519.038415, 0.000000, X, Y)
[Tue May 22 15:00:07 2012] Writing fullrun_mos2_xmm0030140101_pi300-10000_pass1_cl_src29.gif
[Tue May 22 15:13:00 2012] Mean detx,y = (-3089.32, -3664.47) 
[Tue May 22 15:13:02 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 22 15:13:15 2012] Binned source spectrum to 10 counts/bin
[Tue May 22 15:13:15 2012] Setting source spectrum file to fullrun_mos2_xmm0030140101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Tue May 22 15:13:15 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0030140101_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Tue May 22 16:02:49 2012] Not generating rmf since there are only 60 counts
[Tue May 22 16:02:49 2012] rmf not generated due to insufficient counts
[Tue May 22 16:23:19 2012] Updating aperture counts using extracted products
[Tue May 22 16:23:19 2012] Error reading totcts from fullrun_mos2_xmm0030140101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Tue May 22 16:23:20 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 22 16:23:20 2012] Using photon index=1.80, rate=0.00365, arf fullrun_mos2_xmm0030140101_pi300-10000_pass1_cl_src29.arf
[Tue May 22 16:23:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 22 16:23:20 2012] Updating source flux to 5.3e-14
[Tue May 22 16:25:27 2012] Source 29 has fewer than 100.000000 counts, skipping spectral fitting