[Tue May 22 02:48:29 2012] Detection parameters:
  Position = (270.8, 205.0) = 12 54 40.60 -29 13 38.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1378.2 +/- 46.1
  Background counts = 53.7
  Rate = 0.1 +/- 0.004

[Tue May 22 02:48:30 2012] Off-axis axis estimate = 7.06'
[Tue May 22 05:38:44 2012] Using EEF radius (= 9.96 ")to estimate initial spatial extent for simple fitting
[Tue May 22 05:38:44 2012] Initial guess for spatial extent in simple fitting = 9.96"
[Tue May 22 05:38:44 2012] source mask rpix=2.3, npix_max = 31, mask sum = 31, frac = 0.996
[Tue May 22 05:38:44 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.96"
[Tue May 22 07:42:22 2012] fullrun_mos2_xmm0030140101_pi300-10000_cl_pass0_src1.ximg exists
[Tue May 22 07:42:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0030140101_pi300-10000_cl_pass0_src1.csv
[Tue May 22 07:42:22 2012] fullrun_mos2_xmm0030140101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue May 22 07:42:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0030140101_pi300-10000_cl_pass0_src1.csv
[Tue May 22 07:42:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0030140101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0030140101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 07:42:22 2012] fullrun_mos2_xmm0030140101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue May 22 07:42:22 2012] fullrun_mos2_xmm0030140101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue May 22 07:42:22 2012] Fit fullrun_mos2_xmm0030140101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue May 22 07:42:45 2012] Warning, spatial fit 1 centroid is now closest to src. 16
[Tue May 22 07:42:45 2012] Spatial fit model total counts = 756.428000, observed total counts = 620.000000
[Tue May 22 07:42:45 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 22 07:42:45 2012] Spatial fit model total counts = 1095.040000, observed total counts = 1096.000000
[Tue May 22 07:42:45 2012] Offset between fit and detection position for source 1 = 7.468633 pixels
[Tue May 22 07:42:45 2012] Warning, changing simple spatial fit ID from 1 to 20
[Tue May 22 07:42:45 2012] 1049.504000 total counts/ 810.266000 bgd. counts: snr = 8.404587
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 7.468633 pixels
  Position = (278.1, 206.5) = 12 54 38.17 -29 13 31.9
  Extent = 18.3 (16.0-19.4)", rotation angle = 0
  Source counts = 239.2 +/- 32.4
  Background counts = 810.3
  Rate = 0.01 +/- 0.002
[Tue May 22 07:42:45 2012] Vigneting correction estimate = 1.000000
[Tue May 22 07:42:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 07:42:45 2012] Assessing source extent using major axis lower bound
[Tue May 22 07:42:45 2012] Source does appear to be extended
[Tue May 22 07:42:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 22 07:42:45 2012] Source is confused with source 4
[Tue May 22 07:42:45 2012] Source is confused with source 35
[Tue May 22 10:29:55 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 22 10:29:55 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 22 10:29:55 2012] Initial guess for spatial extent in simple fitting = 18.28"
[Tue May 22 10:29:55 2012] source mask rpix=4.2, npix_max = 88, mask sum = 90, frac = 1.017
[Tue May 22 10:29:55 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 18.28"
[Tue May 22 12:54:56 2012] fullrun_mos2_xmm0030140101_pi300-10000_cl_pass1_src1.ximg exists
[Tue May 22 12:54:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0030140101_pi300-10000_cl_pass1_src1.csv
[Tue May 22 12:54:56 2012] fullrun_mos2_xmm0030140101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue May 22 12:54:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0030140101_pi300-10000_cl_pass1_src1.csv
[Tue May 22 12:54:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0030140101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0030140101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 12:54:56 2012] fullrun_mos2_xmm0030140101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue May 22 12:54:56 2012] fullrun_mos2_xmm0030140101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue May 22 12:54:56 2012] Fit fullrun_mos2_xmm0030140101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue May 22 12:55:22 2012] Warning, spatial fit 1 centroid is now closest to src. 14
[Tue May 22 12:55:22 2012] Source 1 is offset by 8.104115 and 1.533218 pixels which is larger than
2 X fitted extent = 2.138690 x 2.138690, not incorporating fit results
[Tue May 22 12:55:23 2012] Spatial fit model total counts = 1097.080000, observed total counts = 1096.000000
[Tue May 22 12:55:23 2012] Offset between fit and detection position for source 1 = 0.582736 pixels
[Tue May 22 12:55:23 2012] Warning, changing simple spatial fit ID from 1 to 19
[Tue May 22 12:55:23 2012] 1017.335000 total counts/ 833.969000 bgd. counts: snr = 6.349563
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.582736 pixels
  Position = (278.1, 205.9) = 12 54 38.17 -29 13 34.4
  Extent = 16.0 (10.0-19.4)", rotation angle = 0
  Source counts = 183.4 +/- 31.9
  Background counts = 834.0
  Rate = 0.01 +/- 0.002
[Tue May 22 12:55:23 2012] Vigneting correction estimate = 1.000000
[Tue May 22 12:55:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 12:55:23 2012] Assessing source extent using major axis lower bound
[Tue May 22 12:55:23 2012] Source does appear to be extended
[Tue May 22 12:55:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 22 15:00:06 2012] XMMSAS src. selection expression = ellipse(24144.334000, 17862.646000, 959.640028, 959.640028, 0.000000, X, Y)
[Tue May 22 15:00:06 2012] Writing source region out to fullrun_mos2_xmm0030140101_pi300-10000_pass1_cl_src1_src.reg
[Tue May 22 15:00:06 2012] Extracting stamp from image fullrun_mos2_xmm0030140101_pi300-10000_cl_sm2.00.img.gz, (223, 151) - (333, 261)
[Tue May 22 15:00:06 2012] XMMSAS bgd. selection expression = annulus(24144.334000, 17862.646000, 1599.400046, 3198.800092, X, Y) && !ellipse(22940.895400, 17767.361060, 742.140821, 742.140821, 0.000000, X, Y) && !ellipse(22766.334618, 18192.175077, 1344.960039, 1344.960039, 0.000000, X, Y) && !ellipse(23474.312000, 18245.624000, 1517.752044, 1517.752044, 0.000000, X, Y) && !ellipse(24413.851379, 16556.889557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22260.492523, 18750.785400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24916.135132, 18122.925400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22050.503601, 17396.363358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21667.122000, 18996.538200, 1573.640045, 1573.640045, 0.000000, X, Y) && !ellipse(24424.992000, 19657.762000, 1517.552044, 1517.552044, 0.000000, X, Y)
[Tue May 22 15:00:06 2012] Writing fullrun_mos2_xmm0030140101_pi300-10000_pass1_cl_src1.gif
[Tue May 22 15:00:12 2012] Mean detx,y = (-3102.59, 5479.36) 
[Tue May 22 15:00:14 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 22 15:00:55 2012] Binned source spectrum to 10 counts/bin
[Tue May 22 15:00:55 2012] Setting source spectrum file to fullrun_mos2_xmm0030140101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue May 22 15:00:55 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0030140101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue May 22 16:23:18 2012] Updating aperture counts using extracted products
[Tue May 22 16:23:18 2012] Error reading totcts from fullrun_mos2_xmm0030140101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue May 22 16:23:19 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 22 16:23:19 2012] Using photon index=1.80, rate=0.011, arf fullrun_mos2_xmm0030140101_pi300-10000_pass1_cl_src1.arf
[Tue May 22 16:23:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 22 16:23:19 2012] Updating source flux to 1.5e-13
[Tue May 22 16:25:27 2012] Flag b found in src. 1 procflags, skipping spectral fitting
[Tue May 22 16:25:27 2012] Flag p found in src. 1 procflags, skipping spectral fitting
[Tue May 22 16:25:27 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Tue May 22 16:28:55 2012] Reading fit data from xmm0030140101/analysis//spectral/fullrun_mos2_xmm0030140101_pi300-10000_pass1_cl_src1_pl.csv
[Tue May 22 16:28:55 2012] Spectral fit parameter nH value = 1.79182e+21
[Tue May 22 16:28:55 2012] Spectral fit parameter PhoIndex value = 2.1481
[Tue May 22 16:28:55 2012] Failed to get F(0.3-8.0) from xmm0030140101/analysis//spectral/fullrun_mos2_xmm0030140101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue May 22 16:28:55 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 22 16:28:55 2012] Using Nh = 1.8e+21, photon index=2.15, rate=0.011, arf fullrun_mos2_xmm0030140101_pi300-10000_pass1_cl_src1.arf
[Tue May 22 16:28:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 22 16:28:55 2012] Updating source flux to 1.5e-13