[Wed Sep 28 03:23:40 2011] Detection parameters:
  Position = (207.7, 199.2) = 13 36 26.99 -34 26 38.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 703.7 +/- 33.3
  Background counts = 43.7
  Rate = 0.006 +/- 0.0003

[Wed Sep 28 03:23:41 2011] Off-axis axis estimate = 9.75'
[Wed Sep 28 05:55:33 2011] Using EEF radius (= 11.30 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 05:55:33 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 28 05:55:33 2011] Initial guess for spatial extent in simple fitting = 11.30"
[Wed Sep 28 05:55:33 2011] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.938
[Wed Sep 28 05:55:33 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 11.30"
[Wed Sep 28 08:28:06 2011] fullrun_mos2_xmm0029740801_pi300-10000_cl_pass0_src4.ximg exists
[Wed Sep 28 08:28:06 2011] fullrun_mos2_xmm0029740801_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed Sep 28 08:28:06 2011] Fit fullrun_mos2_xmm0029740801_pi300-10000_cl_pass0_src4 appears to have run properly
[Wed Sep 28 08:28:06 2011] fullrun_mos2_xmm0029740801_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed Sep 28 08:28:06 2011] fullrun_mos2_xmm0029740801_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed Sep 28 08:28:06 2011] Fit fullrun_mos2_xmm0029740801_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Wed Sep 28 08:28:24 2011] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 14.771537 pixels away
[Wed Sep 28 08:28:24 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 08:28:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 08:28:24 2011] Assessing source extent using major
[Wed Sep 28 08:28:24 2011] Source does appear to be extended
[Wed Sep 28 08:28:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 09:57:09 2011] Using EEF radius (= 11.30 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 09:57:09 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 28 09:57:09 2011] Initial guess for spatial extent in simple fitting = 11.30"
[Wed Sep 28 09:57:09 2011] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.938
[Wed Sep 28 09:57:09 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 11.30"
[Wed Sep 28 11:30:58 2011] fullrun_mos2_xmm0029740801_pi300-10000_cl_pass1_src4.ximg exists
[Wed Sep 28 11:30:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0029740801_pi300-10000_cl_pass1_src4.csv
[Wed Sep 28 11:30:58 2011] fullrun_mos2_xmm0029740801_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed Sep 28 11:30:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0029740801_pi300-10000_cl_pass1_src4.csv
[Wed Sep 28 11:30:58 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0029740801_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0029740801_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 11:30:58 2011] fullrun_mos2_xmm0029740801_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed Sep 28 11:30:58 2011] fullrun_mos2_xmm0029740801_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Sep 28 11:30:58 2011] Fit fullrun_mos2_xmm0029740801_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Wed Sep 28 11:31:10 2011] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 13.633783 pixels away
[Wed Sep 28 11:31:10 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 11:31:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 11:31:10 2011] Assessing source extent using major
[Wed Sep 28 11:31:10 2011] Source does appear to be extended
[Wed Sep 28 11:31:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 15:33:07 2011] XMMSAS src. selection expression = ellipse(18023.689697, 17283.861801, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Sep 28 15:33:07 2011] Writing source region out to fullrun_mos2_xmm0029740801_pi300-10000_pass1_cl_src3_src.reg
[Wed Sep 28 15:33:07 2011] Extracting stamp from image fullrun_mos2_xmm0029740801_pi300-10000_cl_sm2.00.img.gz, (170, 162) - (245, 237)
[Wed Sep 28 15:33:07 2011] XMMSAS bgd. selection expression = annulus(18023.689697, 17283.861801, 1087.500000, 2175.000000, X, Y)
[Wed Sep 28 15:33:07 2011] Writing fullrun_mos2_xmm0029740801_pi300-10000_pass1_cl_src3.gif
[Wed Sep 28 15:43:41 2011] Mean detx,y = (11995.97, -6037.13) 
[Wed Sep 28 15:43:42 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Sep 28 15:43:58 2011] Binned source spectrum to 10 counts/bin
[Wed Sep 28 15:43:58 2011] Setting source spectrum file to fullrun_mos2_xmm0029740801_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Sep 28 15:43:58 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0029740801_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Sep 28 17:00:59 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Sep 28 17:00:59 2011] rmf not generated due to insufficient counts
[Wed Sep 28 17:32:10 2011] Updating aperture counts using extracted products
[Wed Sep 28 17:32:11 2011] Error reading totcts from fullrun_mos2_xmm0029740801_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Sep 28 17:32:11 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 17:32:11 2011] Using photon index=1.80, rate=0.00563, arf fullrun_mos2_xmm0029740801_pi300-10000_pass1_cl_src3.arf
[Wed Sep 28 17:32:11 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 17:32:11 2011] Updating source flux to 1.4e-13
[Wed Sep 28 17:33:08 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting