[Wed Sep 28 03:23:40 2011] Detection parameters:
  Position = (302.2, 322.0) = 13 35 53.76 -34 17 45.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 904104.2 +/- 1051.6
  Background counts = 82.8
  Rate = 8 +/- 0.009

[Wed Sep 28 03:23:41 2011] Off-axis axis estimate = 1.73'
[Wed Sep 28 05:55:33 2011] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 05:55:33 2011] Initial guess for spatial extent in simple fitting = 7.29"
[Wed Sep 28 05:55:33 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.844
[Wed Sep 28 05:55:33 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Wed Sep 28 08:28:06 2011] fullrun_mos2_xmm0029740801_pi300-10000_cl_pass0_src1.ximg exists
[Wed Sep 28 08:28:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0029740801_pi300-10000_cl_pass0_src1.csv
[Wed Sep 28 08:28:06 2011] fullrun_mos2_xmm0029740801_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Sep 28 08:28:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0029740801_pi300-10000_cl_pass0_src1.csv
[Wed Sep 28 08:28:06 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0029740801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0029740801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 08:28:06 2011] fullrun_mos2_xmm0029740801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Sep 28 08:28:06 2011] fullrun_mos2_xmm0029740801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Sep 28 08:28:06 2011] Fit fullrun_mos2_xmm0029740801_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Sep 28 08:28:24 2011] Spatial fit model total counts = 751779.000000, observed total counts = 794983.000000
[Wed Sep 28 08:28:24 2011] Offset between fit and detection position for source 1 = 0.173780 pixels
[Wed Sep 28 08:28:24 2011] 746511.000000 total counts/ 25600.000000 bgd. counts: snr = 4505.693750
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.173780 pixels
  Position = (302.1, 322.0) = 13 35 53.82 -34 17 45.9
  Extent = 7.0 (6.9-7.0)", rotation angle = 0
  Source counts = 720911.0 +/- 864.0
  Background counts = 25600.0
  Rate = 6 +/- 0.007
[Wed Sep 28 08:28:24 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 08:28:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 08:28:24 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 08:28:24 2011] Source does appear to be extended
[Wed Sep 28 08:28:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 09:57:09 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 09:57:09 2011] Initial guess for spatial extent in simple fitting = 6.96"
[Wed Sep 28 09:57:09 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.907
[Wed Sep 28 09:57:09 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 6.96"
[Wed Sep 28 11:30:58 2011] fullrun_mos2_xmm0029740801_pi300-10000_cl_pass1_src1.ximg exists
[Wed Sep 28 11:30:58 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0029740801_pi300-10000_cl_pass1_src1.csv
[Wed Sep 28 11:30:58 2011] fullrun_mos2_xmm0029740801_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Sep 28 11:30:58 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0029740801_pi300-10000_cl_pass1_src1.csv
[Wed Sep 28 11:30:58 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0029740801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0029740801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 11:30:58 2011] fullrun_mos2_xmm0029740801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Sep 28 11:30:58 2011] fullrun_mos2_xmm0029740801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Sep 28 11:30:58 2011] Fit fullrun_mos2_xmm0029740801_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Sep 28 11:31:10 2011] Spatial fit model total counts = 751717.000000, observed total counts = 794983.000000
[Wed Sep 28 11:31:10 2011] Offset between fit and detection position for source 1 = 0.000115 pixels
[Wed Sep 28 11:31:10 2011] 746449.000000 total counts/ 25600.000000 bgd. counts: snr = 4505.306250
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000115 pixels
  Position = (302.1, 322.0) = 13 35 53.82 -34 17 45.9
  Extent = 7.0 (6.9-7.0)", rotation angle = 0
  Source counts = 720849.0 +/- 864.0
  Background counts = 25600.0
  Rate = 6 +/- 0.007
[Wed Sep 28 11:31:10 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 11:31:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 11:31:10 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 11:31:10 2011] Source does appear to be extended
[Wed Sep 28 11:31:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 15:33:07 2011] Counts = 720849.000000, rescaling region sizes by 3.000000
[Wed Sep 28 15:33:07 2011] XMMSAS src. selection expression = ellipse(26230.110580, 27965.904800, 1252.711836, 1252.711836, 0.000000, X, Y)
[Wed Sep 28 15:33:07 2011] Writing source region out to fullrun_mos2_xmm0029740801_pi300-10000_pass1_cl_src1_src.reg
[Wed Sep 28 15:33:07 2011] Extracting stamp from image fullrun_mos2_xmm0029740801_pi300-10000_cl_sm2.00.img.gz, (230, 250) - (374, 394)
[Wed Sep 28 15:33:07 2011] XMMSAS bgd. selection expression = annulus(26230.110580, 27965.904800, 6263.559180, 12527.118360, X, Y) && !ellipse(26749.892181, 28854.934814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27243.119629, 28140.479706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34943.960460, 23092.294600, 388.815211, 388.815211, 0.000000, X, Y) && !ellipse(18023.689697, 17283.861801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17554.364151, 32512.011993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35959.823960, 25718.018800, 544.676816, 544.676816, 0.000000, X, Y) && !ellipse(28846.712189, 20856.580734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35531.512720, 37527.866000, 376.041611, 376.041611, 0.000000, X, Y) && !ellipse(30290.949890, 37644.852692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15312.466705, 37981.244904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32586.281128, 32871.834839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32629.810333, 17435.621948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20884.272690, 35205.244507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36994.739200, 23538.361520, 1322.960038, 407.612012, 38.720300, X, Y) && !ellipse(30546.669037, 16046.323441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35828.111725, 29617.852173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30870.532166, 34351.687103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35546.600000, 24307.758000, 1666.472048, 1666.472048, 0.000000, X, Y) && !ellipse(36784.633820, 23680.139343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28445.265200, 40859.580200, 554.382416, 554.382416, 0.000000, X, Y) && !ellipse(34593.332000, 34247.270000, 1117.512032, 1117.512032, 0.000000, X, Y) && !ellipse(29494.058777, 39242.004150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34828.617981, 37675.382874, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36100.430115, 37342.197937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24510.740000, 19101.838000, 1521.512044, 1521.512044, 0.000000, X, Y) && !ellipse(21060.952000, 39517.306000, 2022.872058, 2022.872058, 0.000000, X, Y)
[Wed Sep 28 15:33:07 2011] Writing fullrun_mos2_xmm0029740801_pi300-10000_pass1_cl_src1.gif
[Wed Sep 28 15:33:59 2011] Mean detx,y = (36.33, 82.65) 
[Wed Sep 28 15:34:05 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Sep 28 15:36:47 2011] Binned source spectrum to 10 counts/bin
[Wed Sep 28 15:36:47 2011] Setting source spectrum file to fullrun_mos2_xmm0029740801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Sep 28 15:36:47 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0029740801_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Sep 28 17:32:10 2011] Updating aperture counts using extracted products
[Wed Sep 28 17:32:10 2011] Error reading totcts from fullrun_mos2_xmm0029740801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Sep 28 17:32:11 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 17:32:11 2011] Using photon index=1.80, rate=5.8, arf fullrun_mos2_xmm0029740801_pi300-10000_pass1_cl_src1.arf
[Wed Sep 28 17:32:11 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 17:32:11 2011] Updating source flux to 5.9e-11
[Wed Sep 28 17:34:36 2011] Reading fit data from xmm0029740801/analysis//spectral/fullrun_mos2_xmm0029740801_pi300-10000_pass1_cl_src1_pl.csv
[Wed Sep 28 17:34:36 2011] Spectral fit parameter nH value = 1.04764e+14
[Wed Sep 28 17:34:36 2011] Spectral fit parameter PhoIndex value = 1.77609
[Wed Sep 28 17:34:36 2011] Failed to get F(0.3-8.0) from xmm0029740801/analysis//spectral/fullrun_mos2_xmm0029740801_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Sep 28 17:34:36 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 17:34:36 2011] Using Nh = 1e+14, photon index=1.78, rate=5.8, arf fullrun_mos2_xmm0029740801_pi300-10000_pass1_cl_src1.arf
[Wed Sep 28 17:34:36 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 17:34:36 2011] Updating source flux to 6e-11