[Wed Sep 28 03:23:10 2011] Detection parameters:
  Position = (302.2, 322.0) = 13 35 53.75 -34 17 45.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 909314.1 +/- 948.8
  Background counts = 87.4
  Rate = 8 +/- 0.008

[Wed Sep 28 03:23:11 2011] Off-axis axis estimate = 1.73'
[Wed Sep 28 04:50:37 2011] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 04:50:37 2011] Initial guess for spatial extent in simple fitting = 7.29"
[Wed Sep 28 04:50:37 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.844
[Wed Sep 28 04:50:37 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Wed Sep 28 05:55:32 2011] fullrun_mos1_xmm0029740801_pi300-10000_cl_pass0_src1.ximg exists
[Wed Sep 28 05:55:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0029740801_pi300-10000_cl_pass0_src1.csv
[Wed Sep 28 05:55:32 2011] fullrun_mos1_xmm0029740801_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Sep 28 05:55:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0029740801_pi300-10000_cl_pass0_src1.csv
[Wed Sep 28 05:55:32 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0029740801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0029740801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 05:55:32 2011] fullrun_mos1_xmm0029740801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Sep 28 05:55:32 2011] fullrun_mos1_xmm0029740801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Sep 28 05:55:32 2011] Fit fullrun_mos1_xmm0029740801_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Sep 28 08:28:17 2011] Spatial fit model total counts = 737873.000000, observed total counts = 788674.000000
[Wed Sep 28 08:28:17 2011] Offset between fit and detection position for source 4 = 0.181069 pixels
[Wed Sep 28 08:28:17 2011] 737561.000000 total counts/ 25600.000000 bgd. counts: snr = 4449.756250
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.181069 pixels
  Position = (302.1, 322.0) = 13 35 53.82 -34 17 45.8
  Extent = 7.1 (7.1-7.1)", rotation angle = 0
  Source counts = 711961.0 +/- 858.8
  Background counts = 25600.0
  Rate = 6 +/- 0.007
[Wed Sep 28 08:28:17 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 08:28:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 08:28:17 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 08:28:17 2011] Source does appear to be extended
[Wed Sep 28 08:28:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 09:29:09 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 09:29:09 2011] Initial guess for spatial extent in simple fitting = 7.07"
[Wed Sep 28 09:29:09 2011] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.885
[Wed Sep 28 09:29:09 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 7.07"
[Wed Sep 28 09:57:08 2011] fullrun_mos1_xmm0029740801_pi300-10000_cl_pass1_src1.ximg exists
[Wed Sep 28 09:57:08 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0029740801_pi300-10000_cl_pass1_src1.csv
[Wed Sep 28 09:57:08 2011] fullrun_mos1_xmm0029740801_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Sep 28 09:57:08 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0029740801_pi300-10000_cl_pass1_src1.csv
[Wed Sep 28 09:57:08 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0029740801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0029740801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 09:57:08 2011] fullrun_mos1_xmm0029740801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Sep 28 09:57:08 2011] fullrun_mos1_xmm0029740801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Sep 28 09:57:08 2011] Fit fullrun_mos1_xmm0029740801_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Sep 28 11:31:05 2011] Spatial fit model total counts = 737772.000000, observed total counts = 788674.000000
[Wed Sep 28 11:31:05 2011] Offset between fit and detection position for source 4 = 0.000485 pixels
[Wed Sep 28 11:31:05 2011] 737458.000000 total counts/ 25600.000000 bgd. counts: snr = 4449.112500
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.000485 pixels
  Position = (302.1, 322.0) = 13 35 53.82 -34 17 45.8
  Extent = 7.1 (7.1-7.1)", rotation angle = 0
  Source counts = 711858.0 +/- 858.8
  Background counts = 25600.0
  Rate = 6 +/- 0.007
[Wed Sep 28 11:31:05 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 11:31:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 11:31:05 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 11:31:05 2011] Source does appear to be extended
[Wed Sep 28 11:31:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 13:35:22 2011] Counts = 711858.000000, rescaling region sizes by 3.000000
[Wed Sep 28 13:35:22 2011] XMMSAS src. selection expression = ellipse(26231.290860, 27968.255200, 1272.697237, 1272.697237, 0.000000, X, Y)
[Wed Sep 28 13:35:22 2011] Writing source region out to fullrun_mos1_xmm0029740801_pi300-10000_pass1_cl_src4_src.reg
[Wed Sep 28 13:35:22 2011] Extracting stamp from image fullrun_mos1_xmm0029740801_pi300-10000_cl_sm2.00.img.gz, (229, 249) - (375, 395)
[Wed Sep 28 13:35:22 2011] XMMSAS bgd. selection expression = annulus(26231.290860, 27968.255200, 6363.486183, 12726.972366, X, Y) && !ellipse(34908.826020, 23130.234800, 426.404812, 426.404812, 0.000000, X, Y) && !ellipse(18011.187164, 17275.635193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17593.047928, 32498.646576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35980.271454, 25697.470428, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35538.588745, 37538.840027, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30272.393890, 37685.065765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15357.288289, 37976.681066, 656.809339, 262.086408, 311.115167, X, Y) && !ellipse(17648.469009, 14398.013550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29468.987335, 39275.059265, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28468.354584, 40895.556396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36405.097382, 24381.061768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35858.888800, 29461.862600, 1282.184037, 1282.184037, 0.000000, X, Y) && !ellipse(30889.366943, 34349.271027, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20743.285400, 35219.580200, 768.768022, 768.768022, 0.000000, X, Y) && !ellipse(24022.151200, 18655.936200, 565.665616, 565.665616, 0.000000, X, Y) && !ellipse(13682.844238, 30039.746948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34786.979156, 37686.751709, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16924.455795, 36048.102142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37163.187897, 23434.111053, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Sep 28 13:35:22 2011] Writing fullrun_mos1_xmm0029740801_pi300-10000_pass1_cl_src4.gif
[Wed Sep 28 13:36:14 2011] Mean detx,y = (295.37, -183.96) 
[Wed Sep 28 13:36:20 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Sep 28 13:40:52 2011] Binned source spectrum to 10 counts/bin
[Wed Sep 28 13:40:52 2011] Setting source spectrum file to fullrun_mos1_xmm0029740801_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Sep 28 13:40:52 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0029740801_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed Sep 28 17:32:09 2011] Updating aperture counts using extracted products
[Wed Sep 28 17:32:09 2011] Error reading totcts from fullrun_mos1_xmm0029740801_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Sep 28 17:32:10 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 17:32:10 2011] Using photon index=1.80, rate=5.73, arf fullrun_mos1_xmm0029740801_pi300-10000_pass1_cl_src4.arf
[Wed Sep 28 17:32:10 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 17:32:10 2011] Updating source flux to 5.2e-11
[Wed Sep 28 17:33:08 2011] Reading fit data from xmm0029740801/analysis//spectral/fullrun_mos1_xmm0029740801_pi300-10000_pass1_cl_src4_pl.csv
[Wed Sep 28 17:33:08 2011] Spectral fit parameter nH value = 1.88301e+13
[Wed Sep 28 17:33:08 2011] Spectral fit parameter PhoIndex value = 1.766
[Wed Sep 28 17:33:08 2011] Failed to get F(0.3-8.0) from xmm0029740801/analysis//spectral/fullrun_mos1_xmm0029740801_pi300-10000_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected
[Wed Sep 28 17:33:08 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 17:33:08 2011] Using Nh = 1.9e+13, photon index=1.77, rate=5.73, arf fullrun_mos1_xmm0029740801_pi300-10000_pass1_cl_src4.arf
[Wed Sep 28 17:33:08 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 17:33:08 2011] Updating source flux to 5.3e-11