[Sun Sep 25 23:34:57 2011] Detection parameters:
  Position = (308.1, 332.5) = 13 35 51.68 -34 17 0.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1757.9 +/- 67.9
  Background counts = 156.2
  Rate = 0.02 +/- 0.0007

[Sun Sep 25 23:34:58 2011] Off-axis axis estimate = 2.56'
[Mon Sep 26 02:08:38 2011] Using EEF radius (= 7.71 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 02:08:38 2011] Initial guess for spatial extent in simple fitting = 7.71"
[Mon Sep 26 02:08:38 2011] source mask rpix=1.8, npix_max = 20, mask sum = 14, frac = 0.678
[Mon Sep 26 02:08:38 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 7.71"
[Mon Sep 26 04:08:24 2011] fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_src4.ximg exists
[Mon Sep 26 04:08:24 2011] fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_src4_1.ximg exists
[Mon Sep 26 04:08:24 2011] Fit fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_src4 appears to have run properly
[Mon Sep 26 04:08:24 2011] fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Mon Sep 26 04:08:24 2011] fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Mon Sep 26 04:08:24 2011] Fit fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Mon Sep 26 04:08:40 2011] Source 6 is offset by 5.964535 and 6.569350 pixels which is larger than
2 X fitted extent = 3.300175 x 3.300175, not incorporating fit results
[Mon Sep 26 04:08:40 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 04:08:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 04:08:40 2011] Assessing source extent using major
[Mon Sep 26 04:08:40 2011] Source does appear to be extended
[Mon Sep 26 04:08:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 05:26:55 2011] Using EEF radius (= 7.71 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 05:26:55 2011] Initial guess for spatial extent in simple fitting = 7.71"
[Mon Sep 26 05:26:55 2011] source mask rpix=1.8, npix_max = 20, mask sum = 14, frac = 0.678
[Mon Sep 26 05:26:55 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 7.71"
[Mon Sep 26 07:05:05 2011] fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_src4.ximg exists
[Mon Sep 26 07:05:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_src4.csv
[Mon Sep 26 07:05:05 2011] fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_src4_1.ximg exists
[Mon Sep 26 07:05:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_src4.csv
[Mon Sep 26 07:05:05 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 07:05:06 2011] fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Mon Sep 26 07:05:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_tfrozen_src4.csv
[Mon Sep 26 07:05:06 2011] fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Mon Sep 26 07:05:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_tfrozen_src4.csv
[Mon Sep 26 07:05:06 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 07:05:16 2011] Source 6 is offset by 5.945730 and 6.569350 pixels which is larger than
2 X fitted extent = 2.897035 x 2.897035, not incorporating fit results
[Mon Sep 26 07:05:16 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 07:05:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 07:05:16 2011] Assessing source extent using major
[Mon Sep 26 07:05:16 2011] Source does appear to be extended
[Mon Sep 26 07:05:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 12:45:31 2011] Counts = 1757.917114, rescaling region sizes by 2.000000
[Wed Sep 28 12:45:31 2011] XMMSAS src. selection expression = ellipse(26752.706512, 28877.157410, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed Sep 28 12:45:31 2011] Writing source region out to fullrun_mos2_xmm0029740701_pi300-10000_pass1_cl_src6_src.reg
[Wed Sep 28 12:45:31 2011] Extracting stamp from image fullrun_mos2_xmm0029740701_pi300-10000_cl_sm2.00.img.gz, (233, 257) - (383, 407)
[Wed Sep 28 12:45:31 2011] XMMSAS bgd. selection expression = annulus(26752.706512, 28877.157410, 4350.000000, 8700.000000, X, Y) && !ellipse(26236.667800, 27973.129200, 1788.652851, 1788.652851, 0.000000, X, Y) && !ellipse(27243.881622, 27796.573761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27241.871765, 28184.593018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34963.169556, 23097.971069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17553.572952, 32514.996246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28853.986969, 20853.410629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30252.735287, 37653.837776, 504.038415, 347.564338, 24.923561, X, Y) && !ellipse(35525.734600, 37537.306000, 428.856012, 220.962406, 27.966900, X, Y) && !ellipse(35969.882324, 25698.752808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20895.981369, 35211.977661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32577.639008, 32890.759888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35786.340149, 29556.868805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30999.083374, 34328.880402, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34849.300659, 37655.324127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36067.499786, 37399.764282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18245.643509, 36536.561157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33914.161040, 38047.642000, 1985.144057, 1985.144057, 0.000000, X, Y)
[Wed Sep 28 12:45:31 2011] Writing fullrun_mos2_xmm0029740701_pi300-10000_pass1_cl_src6.gif
[Wed Sep 28 12:58:59 2011] Mean detx,y = (-11.65, 109.57) 
[Wed Sep 28 12:59:05 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Sep 28 13:01:12 2011] Binned source spectrum to 10 counts/bin
[Wed Sep 28 13:01:12 2011] Setting source spectrum file to fullrun_mos2_xmm0029740701_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Sep 28 13:01:12 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0029740701_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Wed Sep 28 14:14:38 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Sep 28 14:14:38 2011] rmf not generated due to insufficient counts
[Wed Sep 28 14:55:40 2011] Updating aperture counts using extracted products
[Wed Sep 28 14:55:40 2011] Error reading totcts from fullrun_mos2_xmm0029740701_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Sep 28 14:55:41 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 14:55:41 2011] Using photon index=1.80, rate=0.0188, arf fullrun_mos2_xmm0029740701_pi300-10000_pass1_cl_src6.arf
[Wed Sep 28 14:55:41 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 14:55:41 2011] Updating source flux to 1.9e-13
[Wed Sep 28 14:57:09 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting