[Sun Sep 25 23:34:57 2011] Detection parameters:
  Position = (402.4, 266.1) = 13 35 18.52 -34 21 48.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 709.8 +/- 36.2
  Background counts = 119.0
  Rate = 0.009 +/- 0.0004

[Sun Sep 25 23:34:58 2011] Off-axis axis estimate = 7.90'
[Mon Sep 26 02:08:38 2011] Using EEF radius (= 10.38 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 02:08:38 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep 26 02:08:38 2011] Initial guess for spatial extent in simple fitting = 10.38"
[Mon Sep 26 02:08:38 2011] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.901
[Mon Sep 26 02:08:38 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 10.38"
[Mon Sep 26 04:08:24 2011] fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_src5.ximg exists
[Mon Sep 26 04:08:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_src5.csv
[Mon Sep 26 04:08:24 2011] fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_src5_1.ximg exists
[Mon Sep 26 04:08:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_src5.csv
[Mon Sep 26 04:08:24 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 04:08:24 2011] fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Mon Sep 26 04:08:24 2011] fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Mon Sep 26 04:08:24 2011] Fit fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Mon Sep 26 04:08:40 2011] Warning, spatial fit 5 centroid is now closest to src. 30
[Mon Sep 26 04:08:40 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 04:08:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 04:08:40 2011] Assessing source extent using major
[Mon Sep 26 04:08:40 2011] Source does appear to be extended
[Mon Sep 26 04:08:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 05:26:55 2011] Using EEF radius (= 10.38 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 05:26:55 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep 26 05:26:55 2011] Initial guess for spatial extent in simple fitting = 10.38"
[Mon Sep 26 05:26:55 2011] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.901
[Mon Sep 26 05:26:55 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 10.38"
[Mon Sep 26 07:05:05 2011] fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_src5.ximg exists
[Mon Sep 26 07:05:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_src5.csv
[Mon Sep 26 07:05:05 2011] fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_src5_1.ximg exists
[Mon Sep 26 07:05:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_src5.csv
[Mon Sep 26 07:05:05 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 07:05:06 2011] fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Mon Sep 26 07:05:06 2011] fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Mon Sep 26 07:05:06 2011] Fit fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Mon Sep 26 07:05:16 2011] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 13.893515 pixels away
[Mon Sep 26 07:05:16 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 07:05:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 07:05:16 2011] Assessing source extent using major
[Mon Sep 26 07:05:16 2011] Source does appear to be extended
[Mon Sep 26 07:05:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 12:45:31 2011] XMMSAS src. selection expression = ellipse(34963.169556, 23097.971069, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Sep 28 12:45:31 2011] Writing source region out to fullrun_mos2_xmm0029740701_pi300-10000_pass1_cl_src4_src.reg
[Wed Sep 28 12:45:31 2011] Extracting stamp from image fullrun_mos2_xmm0029740701_pi300-10000_cl_sm2.00.img.gz, (365, 229) - (440, 304)
[Wed Sep 28 12:45:31 2011] XMMSAS bgd. selection expression = annulus(34963.169556, 23097.971069, 1087.500000, 2175.000000, X, Y) && !ellipse(35969.882324, 25698.752808, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Sep 28 12:45:31 2011] Writing fullrun_mos2_xmm0029740701_pi300-10000_pass1_cl_src4.gif
[Wed Sep 28 13:01:24 2011] Mean detx,y = (-5789.69, -8027.78) 
[Wed Sep 28 13:01:25 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Sep 28 13:01:39 2011] Binned source spectrum to 10 counts/bin
[Wed Sep 28 13:01:39 2011] Setting source spectrum file to fullrun_mos2_xmm0029740701_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Sep 28 13:01:39 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0029740701_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed Sep 28 14:26:50 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Sep 28 14:26:50 2011] rmf not generated due to insufficient counts
[Wed Sep 28 14:55:40 2011] Updating aperture counts using extracted products
[Wed Sep 28 14:55:40 2011] Error reading totcts from fullrun_mos2_xmm0029740701_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Sep 28 14:55:41 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 14:55:41 2011] Using photon index=1.80, rate=0.00865, arf fullrun_mos2_xmm0029740701_pi300-10000_pass1_cl_src4.arf
[Wed Sep 28 14:55:41 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 14:55:41 2011] Updating source flux to 1.4e-13
[Wed Sep 28 14:57:09 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting