[Sun Sep 25 23:34:58 2011] Detection parameters:
  Position = (145.4, 343.1) = 13 36 48.78 -34 16 11.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 146.8 +/- 19.8
  Background counts = 85.7
  Rate = 0.001 +/- 0.0002

[Sun Sep 25 23:34:58 2011] Off-axis axis estimate = 11.56'
[Mon Sep 26 02:08:38 2011] Using EEF radius (= 12.21 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 02:08:38 2011] Initial guess for spatial extent in simple fitting = 12.21"
[Mon Sep 26 02:08:38 2011] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.960
[Mon Sep 26 02:08:38 2011] Giving source the simple spatial ID 28 for pass 0, mean size = 12.21"
[Mon Sep 26 04:08:24 2011] fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_src28.ximg exists
[Mon Sep 26 04:08:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_src28.csv
[Mon Sep 26 04:08:24 2011] fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_src28_1.ximg exists
[Mon Sep 26 04:08:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_src28.csv
[Mon Sep 26 04:08:24 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 04:08:25 2011] fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Mon Sep 26 04:08:25 2011] fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Mon Sep 26 04:08:25 2011] Fit fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Mon Sep 26 04:08:40 2011] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 11.535074 pixels away
[Mon Sep 26 04:08:40 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 04:08:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 04:08:40 2011] Assessing source extent using major
[Mon Sep 26 04:08:40 2011] Source does appear to be extended
[Mon Sep 26 04:08:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 05:26:55 2011] Using EEF radius (= 12.21 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 05:26:55 2011] Initial guess for spatial extent in simple fitting = 12.21"
[Mon Sep 26 05:26:55 2011] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.960
[Mon Sep 26 05:26:55 2011] Giving source the simple spatial ID 26 for pass 1, mean size = 12.21"
[Mon Sep 26 07:05:06 2011] fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_src26.ximg exists
[Mon Sep 26 07:05:06 2011] fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_src26_1.ximg exists
[Mon Sep 26 07:05:06 2011] Fit fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_src26 appears to have run properly
[Mon Sep 26 07:05:06 2011] fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Mon Sep 26 07:05:06 2011] fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Mon Sep 26 07:05:06 2011] Fit fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Mon Sep 26 07:05:16 2011] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 27 at 15.093336 pixels away
[Mon Sep 26 07:05:16 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 07:05:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 07:05:16 2011] Assessing source extent using major
[Mon Sep 26 07:05:16 2011] Source does appear to be extended
[Mon Sep 26 07:05:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 12:45:31 2011] XMMSAS src. selection expression = ellipse(12597.209396, 29802.403259, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Sep 28 12:45:31 2011] Writing source region out to fullrun_mos2_xmm0029740701_pi300-10000_pass1_cl_src27_src.reg
[Wed Sep 28 12:45:31 2011] Extracting stamp from image fullrun_mos2_xmm0029740701_pi300-10000_cl_sm2.00.img.gz, (108, 306) - (183, 381)
[Wed Sep 28 12:45:31 2011] XMMSAS bgd. selection expression = annulus(12597.209396, 29802.403259, 1087.500000, 2175.000000, X, Y)
[Wed Sep 28 12:45:31 2011] Writing fullrun_mos2_xmm0029740701_pi300-10000_pass1_cl_src27.gif
[Wed Sep 28 13:11:18 2011] Mean detx,y = (11577.79, 7589.89) 
[Wed Sep 28 13:11:20 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Sep 28 13:11:54 2011] Binned source spectrum to 10 counts/bin
[Wed Sep 28 13:11:54 2011] Setting source spectrum file to fullrun_mos2_xmm0029740701_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Wed Sep 28 13:11:54 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0029740701_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Wed Sep 28 14:38:46 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Sep 28 14:38:46 2011] rmf not generated due to insufficient counts
[Wed Sep 28 14:55:41 2011] Updating aperture counts using extracted products
[Wed Sep 28 14:55:41 2011] Error reading totcts from fullrun_mos2_xmm0029740701_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Wed Sep 28 14:55:42 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 14:55:42 2011] Using photon index=1.80, rate=0.00119, arf fullrun_mos2_xmm0029740701_pi300-10000_pass1_cl_src27.arf
[Wed Sep 28 14:55:42 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 14:55:42 2011] Updating source flux to 3.4e-14
[Wed Sep 28 14:57:09 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting