[Sun Sep 25 23:34:58 2011] Detection parameters:
  Position = (375.0, 378.6) = 13 35 28.20 -34 13 39.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 143.9 +/- 20.8
  Background counts = 127.1
  Rate = 0.002 +/- 0.0002

[Sun Sep 25 23:34:58 2011] Off-axis axis estimate = 8.04'
[Mon Sep 26 02:08:38 2011] Using EEF radius (= 10.45 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 02:08:38 2011] Initial guess for spatial extent in simple fitting = 10.45"
[Mon Sep 26 02:08:38 2011] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.069
[Mon Sep 26 02:08:38 2011] Giving source the simple spatial ID 16 for pass 0, mean size = 10.45"
[Mon Sep 26 04:08:24 2011] fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_src16.ximg exists
[Mon Sep 26 04:08:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_src16.csv
[Mon Sep 26 04:08:24 2011] fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_src16_1.ximg exists
[Mon Sep 26 04:08:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_src16.csv
[Mon Sep 26 04:08:24 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 04:08:24 2011] fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Mon Sep 26 04:08:25 2011] fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Mon Sep 26 04:08:25 2011] Fit fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Mon Sep 26 04:08:40 2011] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 13.305486 pixels away
[Mon Sep 26 04:08:40 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 04:08:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 04:08:40 2011] Assessing source extent using major
[Mon Sep 26 04:08:40 2011] Source does appear to be extended
[Mon Sep 26 04:08:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 05:26:55 2011] Using EEF radius (= 10.45 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 05:26:55 2011] Initial guess for spatial extent in simple fitting = 10.45"
[Mon Sep 26 05:26:55 2011] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.069
[Mon Sep 26 05:26:55 2011] Giving source the simple spatial ID 16 for pass 1, mean size = 10.45"
[Mon Sep 26 07:05:06 2011] fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_src16.ximg exists
[Mon Sep 26 07:05:06 2011] fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_src16_1.ximg exists
[Mon Sep 26 07:05:06 2011] Fit fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_src16 appears to have run properly
[Mon Sep 26 07:05:06 2011] fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Mon Sep 26 07:05:06 2011] fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Mon Sep 26 07:05:06 2011] Fit fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Mon Sep 26 07:05:16 2011] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 13.305486 pixels away
[Mon Sep 26 07:05:16 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 07:05:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 07:05:16 2011] Assessing source extent using major
[Mon Sep 26 07:05:16 2011] Source does appear to be extended
[Mon Sep 26 07:05:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 12:45:31 2011] XMMSAS src. selection expression = ellipse(32577.639008, 32890.759888, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Sep 28 12:45:31 2011] Writing source region out to fullrun_mos2_xmm0029740701_pi300-10000_pass1_cl_src25_src.reg
[Wed Sep 28 12:45:31 2011] Extracting stamp from image fullrun_mos2_xmm0029740701_pi300-10000_cl_sm2.00.img.gz, (338, 341) - (413, 416)
[Wed Sep 28 12:45:31 2011] XMMSAS bgd. selection expression = annulus(32577.639008, 32890.759888, 1087.500000, 2175.000000, X, Y) && !ellipse(30999.083374, 34328.880402, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Sep 28 12:45:31 2011] Writing fullrun_mos2_xmm0029740701_pi300-10000_pass1_cl_src25.gif
[Wed Sep 28 13:06:59 2011] Mean detx,y = (-7808.06, 1826.45) 
[Wed Sep 28 13:07:01 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Sep 28 13:07:09 2011] Binned source spectrum to 10 counts/bin
[Wed Sep 28 13:07:09 2011] Setting source spectrum file to fullrun_mos2_xmm0029740701_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Wed Sep 28 13:07:09 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0029740701_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Wed Sep 28 14:34:31 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Sep 28 14:34:31 2011] rmf not generated due to insufficient counts
[Wed Sep 28 14:55:40 2011] Updating aperture counts using extracted products
[Wed Sep 28 14:55:40 2011] Error reading totcts from fullrun_mos2_xmm0029740701_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Wed Sep 28 14:55:41 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 14:55:41 2011] Using photon index=1.80, rate=0.00169, arf fullrun_mos2_xmm0029740701_pi300-10000_pass1_cl_src25.arf
[Wed Sep 28 14:55:41 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 14:55:41 2011] Updating source flux to 2.5e-14
[Wed Sep 28 14:57:09 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting