[Sun Sep 25 23:34:57 2011] Detection parameters:
  Position = (313.7, 320.1) = 13 35 49.70 -34 17 57.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2211.1 +/- 79.3
  Background counts = 155.1
  Rate = 0.02 +/- 0.0008

[Sun Sep 25 23:34:58 2011] Off-axis axis estimate = 1.92'
[Mon Sep 26 02:08:38 2011] Using EEF radius (= 7.39 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 02:08:38 2011] Initial guess for spatial extent in simple fitting = 7.39"
[Mon Sep 26 02:08:38 2011] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.621
[Mon Sep 26 02:08:38 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 7.39"
[Mon Sep 26 04:08:24 2011] fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_src2.ximg exists
[Mon Sep 26 04:08:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_src2.csv
[Mon Sep 26 04:08:24 2011] fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_src2_1.ximg exists
[Mon Sep 26 04:08:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_src2.csv
[Mon Sep 26 04:08:24 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 04:08:24 2011] fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Mon Sep 26 04:08:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_tfrozen_src2.csv
[Mon Sep 26 04:08:24 2011] fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Mon Sep 26 04:08:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_tfrozen_src2.csv
[Mon Sep 26 04:08:24 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 04:08:40 2011] Source 2 is offset by 7.499168 and -1.556580 pixels which is larger than
2 X fitted extent = 2.479430 x 2.479430, not incorporating fit results
[Mon Sep 26 04:08:40 2011] Source 2 is offset by 7.623881 and -1.165198 pixels which is larger than
2 X fitted extent = 2.681182 x 2.681182, not incorporating fit results
[Mon Sep 26 04:08:40 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 04:08:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 04:08:40 2011] Assessing source extent using major
[Mon Sep 26 04:08:40 2011] Source does appear to be extended
[Mon Sep 26 04:08:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 04:08:40 2011] Source is confused with source 3
[Mon Sep 26 05:26:55 2011] Using EEF radius (= 7.39 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 05:26:55 2011] Initial guess for spatial extent in simple fitting = 7.39"
[Mon Sep 26 05:26:55 2011] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.621
[Mon Sep 26 05:26:55 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 7.39"
[Mon Sep 26 07:05:05 2011] fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_src2.ximg exists
[Mon Sep 26 07:05:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_src2.csv
[Mon Sep 26 07:05:05 2011] fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon Sep 26 07:05:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_src2.csv
[Mon Sep 26 07:05:05 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 07:05:06 2011] fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon Sep 26 07:05:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_tfrozen_src2.csv
[Mon Sep 26 07:05:06 2011] fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon Sep 26 07:05:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_tfrozen_src2.csv
[Mon Sep 26 07:05:06 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 07:05:16 2011] Source 2 is offset by 7.499168 and -1.544869 pixels which is larger than
2 X fitted extent = 2.532515 x 2.532515, not incorporating fit results
[Mon Sep 26 07:05:16 2011] Source 2 is offset by 7.623881 and -1.170302 pixels which is larger than
2 X fitted extent = 2.675775 x 2.675775, not incorporating fit results
[Mon Sep 26 07:05:16 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 07:05:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 07:05:16 2011] Assessing source extent using major
[Mon Sep 26 07:05:16 2011] Source does appear to be extended
[Mon Sep 26 07:05:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 12:45:30 2011] Counts = 2211.148926, rescaling region sizes by 2.000000
[Wed Sep 28 12:45:30 2011] XMMSAS src. selection expression = ellipse(27243.881622, 27796.573761, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed Sep 28 12:45:30 2011] Writing source region out to fullrun_mos2_xmm0029740701_pi300-10000_pass1_cl_src2_src.reg
[Wed Sep 28 12:45:30 2011] Extracting stamp from image fullrun_mos2_xmm0029740701_pi300-10000_cl_sm2.00.img.gz, (239, 245) - (389, 395)
[Wed Sep 28 12:45:30 2011] XMMSAS bgd. selection expression = annulus(27243.881622, 27796.573761, 4350.000000, 8700.000000, X, Y) && !ellipse(26236.667800, 27973.129200, 1788.652851, 1788.652851, 0.000000, X, Y) && !ellipse(27241.871765, 28184.593018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26752.706512, 28877.157410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34963.169556, 23097.971069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28853.986969, 20853.410629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35969.882324, 25698.752808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20895.981369, 35211.977661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32577.639008, 32890.759888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35786.340149, 29556.868805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27799.680145, 18736.911545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23708.202000, 18624.736000, 1523.040044, 1523.040044, 0.000000, X, Y) && !ellipse(30999.083374, 34328.880402, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18245.643509, 36536.561157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33914.161040, 38047.642000, 1985.144057, 1985.144057, 0.000000, X, Y)
[Wed Sep 28 12:45:30 2011] Writing fullrun_mos2_xmm0029740701_pi300-10000_pass1_cl_src2.gif
[Wed Sep 28 12:51:55 2011] Mean detx,y = (-7.87, 56.02) 
[Wed Sep 28 12:52:00 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Sep 28 12:54:16 2011] Binned source spectrum to 10 counts/bin
[Wed Sep 28 12:54:16 2011] Setting source spectrum file to fullrun_mos2_xmm0029740701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Sep 28 12:54:16 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0029740701_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Sep 28 13:19:15 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Sep 28 13:19:15 2011] rmf not generated due to insufficient counts
[Wed Sep 28 14:55:40 2011] Updating aperture counts using extracted products
[Wed Sep 28 14:55:40 2011] Error reading totcts from fullrun_mos2_xmm0029740701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Sep 28 14:55:41 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 14:55:41 2011] Using photon index=1.80, rate=0.0229, arf fullrun_mos2_xmm0029740701_pi300-10000_pass1_cl_src2.arf
[Wed Sep 28 14:55:41 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 14:55:41 2011] Updating source flux to 2.2e-13
[Wed Sep 28 14:57:09 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting