[Sun Sep 25 23:34:57 2011] Detection parameters:
  Position = (302.2, 321.9) = 13 35 53.74 -34 17 45.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 983683.7 +/- 1138.8
  Background counts = 156.1
  Rate = 8 +/- 0.01

[Sun Sep 25 23:34:58 2011] Off-axis axis estimate = 1.73'
[Mon Sep 26 02:08:38 2011] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 02:08:38 2011] Initial guess for spatial extent in simple fitting = 7.29"
[Mon Sep 26 02:08:38 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Mon Sep 26 02:08:38 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Mon Sep 26 04:08:24 2011] fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_src1.ximg exists
[Mon Sep 26 04:08:24 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_src1.csv
[Mon Sep 26 04:08:24 2011] fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Sep 26 04:08:24 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_src1.csv
[Mon Sep 26 04:08:24 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 04:08:24 2011] fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Sep 26 04:08:24 2011] fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Sep 26 04:08:24 2011] Fit fullrun_mos2_xmm0029740701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Sep 26 04:08:40 2011] Spatial fit model total counts = 783240.000000, observed total counts = 819065.000000
[Mon Sep 26 04:08:40 2011] Offset between fit and detection position for source 1 = 0.152548 pixels
[Mon Sep 26 04:08:40 2011] 769506.000000 total counts/ 25600.000000 bgd. counts: snr = 4649.412500
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.152548 pixels
  Position = (302.0, 322.0) = 13 35 53.79 -34 17 46.1
  Extent = 7.0 (7.0-7.0)", rotation angle = 0
  Source counts = 743906.0 +/- 877.2
  Background counts = 25600.0
  Rate = 6 +/- 0.008
[Mon Sep 26 04:08:40 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 04:08:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 04:08:40 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 04:08:40 2011] Source does appear to be extended
[Mon Sep 26 04:08:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 05:26:55 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 05:26:55 2011] Initial guess for spatial extent in simple fitting = 6.97"
[Mon Sep 26 05:26:55 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.904
[Mon Sep 26 05:26:55 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 6.97"
[Mon Sep 26 07:05:05 2011] fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_src1.ximg exists
[Mon Sep 26 07:05:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_src1.csv
[Mon Sep 26 07:05:05 2011] fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Sep 26 07:05:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_src1.csv
[Mon Sep 26 07:05:05 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 07:05:06 2011] fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Sep 26 07:05:06 2011] fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Sep 26 07:05:06 2011] Fit fullrun_mos2_xmm0029740701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Sep 26 07:05:16 2011] Spatial fit model total counts = 807654.000000, observed total counts = 819065.000000
[Mon Sep 26 07:05:16 2011] Offset between fit and detection position for source 1 = 0.152695 pixels
[Mon Sep 26 07:05:16 2011] 788408.000000 total counts/ 25600.000000 bgd. counts: snr = 4767.550000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.152695 pixels
  Position = (302.1, 322.1) = 13 35 53.76 -34 17 45.5
  Extent = 7.5 (7.5-7.5)", rotation angle = 0
  Source counts = 762808.0 +/- 887.9
  Background counts = 25600.0
  Rate = 7 +/- 0.008
[Mon Sep 26 07:05:16 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 07:05:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 07:05:16 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 07:05:16 2011] Source does appear to be extended
[Mon Sep 26 07:05:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 12:45:30 2011] Counts = 762808.000000, rescaling region sizes by 3.000000
[Wed Sep 28 12:45:30 2011] XMMSAS src. selection expression = ellipse(26236.667800, 27973.129200, 1341.489639, 1341.489639, 0.000000, X, Y)
[Wed Sep 28 12:45:30 2011] Writing source region out to fullrun_mos2_xmm0029740701_pi300-10000_pass1_cl_src1_src.reg
[Wed Sep 28 12:45:30 2011] Extracting stamp from image fullrun_mos2_xmm0029740701_pi300-10000_cl_sm2.00.img.gz, (225, 245) - (379, 399)
[Wed Sep 28 12:45:30 2011] XMMSAS bgd. selection expression = annulus(26236.667800, 27973.129200, 6707.448193, 13414.896386, X, Y) && !ellipse(27243.881622, 27796.573761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27241.871765, 28184.593018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26752.706512, 28877.157410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34963.169556, 23097.971069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18034.666916, 17282.106827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17553.572952, 32514.996246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28853.986969, 20853.410629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30252.735287, 37653.837776, 504.038415, 347.564338, 24.923561, X, Y) && !ellipse(35525.734600, 37537.306000, 428.856012, 220.962406, 27.966900, X, Y) && !ellipse(35969.882324, 25698.752808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30474.794739, 16064.017883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32659.257263, 17423.002594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20895.981369, 35211.977661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32577.639008, 32890.759888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28423.123505, 40858.338196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35786.340149, 29556.868805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27799.680145, 18736.911545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23708.202000, 18624.736000, 1523.040044, 1523.040044, 0.000000, X, Y) && !ellipse(15338.191284, 38040.226379, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30999.083374, 34328.880402, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34849.300659, 37655.324127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34843.119751, 16223.196182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12597.209396, 29802.403259, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29456.307160, 39254.970972, 551.649927, 531.455102, 46.049984, X, Y) && !ellipse(40061.553591, 34226.113361, 2036.824648, 1838.949144, 341.671576, X, Y) && !ellipse(36067.499786, 37399.764282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18245.643509, 36536.561157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33914.161040, 38047.642000, 1985.144057, 1985.144057, 0.000000, X, Y) && !ellipse(38943.845200, 35462.418000, 1143.592033, 1143.592033, 0.000000, X, Y)
[Wed Sep 28 12:45:30 2011] Writing fullrun_mos2_xmm0029740701_pi300-10000_pass1_cl_src1.gif
[Wed Sep 28 12:46:28 2011] Mean detx,y = (34.17, 76.64) 
[Wed Sep 28 12:46:34 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Sep 28 12:51:02 2011] Binned source spectrum to 10 counts/bin
[Wed Sep 28 12:51:02 2011] Setting source spectrum file to fullrun_mos2_xmm0029740701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Sep 28 12:51:02 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0029740701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Sep 28 14:55:40 2011] Updating aperture counts using extracted products
[Wed Sep 28 14:55:40 2011] Error reading totcts from fullrun_mos2_xmm0029740701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Sep 28 14:55:41 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 14:55:41 2011] Using photon index=1.80, rate=6.54, arf fullrun_mos2_xmm0029740701_pi300-10000_pass1_cl_src1.arf
[Wed Sep 28 14:55:41 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 14:55:41 2011] Updating source flux to 6.6e-11
[Wed Sep 28 14:59:36 2011] Reading fit data from xmm0029740701/analysis//spectral/fullrun_mos2_xmm0029740701_pi300-10000_pass1_cl_src1_pl.csv
[Wed Sep 28 14:59:36 2011] Spectral fit parameter nH value = 1.45828e+13
[Wed Sep 28 14:59:36 2011] Spectral fit parameter PhoIndex value = 1.73804
[Wed Sep 28 14:59:36 2011] Failed to get F(0.3-8.0) from xmm0029740701/analysis//spectral/fullrun_mos2_xmm0029740701_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Sep 28 14:59:36 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 14:59:36 2011] Using Nh = 1.5e+13, photon index=1.74, rate=6.54, arf fullrun_mos2_xmm0029740701_pi300-10000_pass1_cl_src1.arf
[Wed Sep 28 14:59:36 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 14:59:36 2011] Updating source flux to 6.8e-11