[Sun Sep 25 23:34:33 2011] Detection parameters:
  Position = (302.2, 322.0) = 13 35 53.73 -34 17 45.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 986843.4 +/- 1238.9
  Background counts = 158.8
  Rate = 8 +/- 0.01

[Sun Sep 25 23:34:34 2011] Off-axis axis estimate = 1.73'
[Mon Sep 26 01:28:04 2011] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 01:28:04 2011] Initial guess for spatial extent in simple fitting = 7.29"
[Mon Sep 26 01:28:04 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.844
[Mon Sep 26 01:28:04 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Mon Sep 26 02:08:37 2011] fullrun_mos1_xmm0029740701_pi300-10000_cl_pass0_src1.ximg exists
[Mon Sep 26 02:08:37 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0029740701_pi300-10000_cl_pass0_src1.csv
[Mon Sep 26 02:08:37 2011] fullrun_mos1_xmm0029740701_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Sep 26 02:08:37 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0029740701_pi300-10000_cl_pass0_src1.csv
[Mon Sep 26 02:08:37 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0029740701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0029740701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 02:08:37 2011] fullrun_mos1_xmm0029740701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Sep 26 02:08:37 2011] fullrun_mos1_xmm0029740701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Sep 26 02:08:37 2011] Fit fullrun_mos1_xmm0029740701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Sep 26 04:08:33 2011] Spatial fit model total counts = 753462.000000, observed total counts = 804270.000000
[Mon Sep 26 04:08:33 2011] Offset between fit and detection position for source 3 = 0.174889 pixels
[Mon Sep 26 04:08:33 2011] 753160.000000 total counts/ 25600.000000 bgd. counts: snr = 4547.250000
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.174889 pixels
  Position = (302.1, 322.0) = 13 35 53.79 -34 17 45.9
  Extent = 7.1 (7.1-7.1)", rotation angle = 0
  Source counts = 727560.0 +/- 867.8
  Background counts = 25600.0
  Rate = 6 +/- 0.008
[Mon Sep 26 04:08:33 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 04:08:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 04:08:33 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 04:08:33 2011] Source does appear to be extended
[Mon Sep 26 04:08:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 04:58:00 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 04:58:00 2011] Initial guess for spatial extent in simple fitting = 7.14"
[Mon Sep 26 04:58:00 2011] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.873
[Mon Sep 26 04:58:00 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 7.14"
[Mon Sep 26 05:26:55 2011] fullrun_mos1_xmm0029740701_pi300-10000_cl_pass1_src1.ximg exists
[Mon Sep 26 05:26:55 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0029740701_pi300-10000_cl_pass1_src1.csv
[Mon Sep 26 05:26:55 2011] fullrun_mos1_xmm0029740701_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Sep 26 05:26:55 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0029740701_pi300-10000_cl_pass1_src1.csv
[Mon Sep 26 05:26:55 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0029740701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0029740701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 05:26:55 2011] fullrun_mos1_xmm0029740701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Sep 26 05:26:55 2011] fullrun_mos1_xmm0029740701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Sep 26 05:26:55 2011] Fit fullrun_mos1_xmm0029740701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Sep 26 07:05:12 2011] Spatial fit model total counts = 753373.000000, observed total counts = 804270.000000
[Mon Sep 26 07:05:12 2011] Offset between fit and detection position for source 3 = 0.000430 pixels
[Mon Sep 26 07:05:12 2011] 753072.000000 total counts/ 25600.000000 bgd. counts: snr = 4546.700000
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.000430 pixels
  Position = (302.1, 322.0) = 13 35 53.79 -34 17 45.9
  Extent = 7.1 (7.1-7.1)", rotation angle = 0
  Source counts = 727472.0 +/- 867.8
  Background counts = 25600.0
  Rate = 6 +/- 0.008
[Mon Sep 26 07:05:12 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 07:05:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 07:05:12 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 07:05:12 2011] Source does appear to be extended
[Mon Sep 26 07:05:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 11:21:09 2011] Counts = 727472.000000, rescaling region sizes by 3.000000
[Wed Sep 28 11:21:09 2011] XMMSAS src. selection expression = ellipse(26230.041900, 27964.587800, 1284.931837, 1284.931837, 0.000000, X, Y)
[Wed Sep 28 11:21:09 2011] Writing source region out to fullrun_mos1_xmm0029740701_pi300-10000_pass1_cl_src3_src.reg
[Wed Sep 28 11:21:09 2011] Extracting stamp from image fullrun_mos1_xmm0029740701_pi300-10000_cl_sm2.00.img.gz, (228, 248) - (376, 396)
[Wed Sep 28 11:21:09 2011] XMMSAS bgd. selection expression = annulus(26230.041900, 27964.587800, 6424.659185, 12849.318370, X, Y) && !ellipse(34918.498688, 23113.067566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17589.965439, 32500.916626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28806.957000, 20867.431000, 446.057613, 446.057613, 0.000000, X, Y) && !ellipse(18011.347794, 17289.282043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35987.065674, 25702.761902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17638.240509, 14398.458267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30249.138489, 37695.478790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35532.525028, 37509.425000, 343.847210, 343.847210, 0.000000, X, Y) && !ellipse(29499.182983, 39241.335083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35784.348877, 29601.011322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15333.511400, 37987.148400, 502.598414, 502.598414, 0.000000, X, Y) && !ellipse(27761.060089, 18714.309280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13692.058517, 30045.882721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28463.922600, 40846.947800, 663.960019, 663.960019, 0.000000, X, Y) && !ellipse(35307.782000, 37554.826400, 2014.096058, 2014.096058, 0.000000, X, Y) && !ellipse(16941.661713, 35997.781372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36038.307739, 37397.369446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34887.272888, 16285.702209, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Sep 28 11:21:09 2011] Writing fullrun_mos1_xmm0029740701_pi300-10000_pass1_cl_src3.gif
[Wed Sep 28 11:22:05 2011] Mean detx,y = (289.76, -181.64) 
[Wed Sep 28 11:22:11 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Sep 28 11:27:04 2011] Binned source spectrum to 10 counts/bin
[Wed Sep 28 11:27:05 2011] Setting source spectrum file to fullrun_mos1_xmm0029740701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Sep 28 11:27:05 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0029740701_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Sep 28 14:55:39 2011] Updating aperture counts using extracted products
[Wed Sep 28 14:55:39 2011] Error reading totcts from fullrun_mos1_xmm0029740701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Sep 28 14:55:39 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 14:55:39 2011] Using photon index=1.80, rate=6.3, arf fullrun_mos1_xmm0029740701_pi300-10000_pass1_cl_src3.arf
[Wed Sep 28 14:55:39 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 14:55:39 2011] Updating source flux to 5.8e-11
[Wed Sep 28 14:57:09 2011] Reading fit data from xmm0029740701/analysis//spectral/fullrun_mos1_xmm0029740701_pi300-10000_pass1_cl_src3_pl.csv
[Wed Sep 28 14:57:09 2011] Spectral fit parameter nH value = 1.1775e+13
[Wed Sep 28 14:57:09 2011] Spectral fit parameter PhoIndex value = 1.7238
[Wed Sep 28 14:57:09 2011] Failed to get F(0.3-8.0) from xmm0029740701/analysis//spectral/fullrun_mos1_xmm0029740701_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Wed Sep 28 14:57:09 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 14:57:09 2011] Using Nh = 1.2e+13, photon index=1.72, rate=6.3, arf fullrun_mos1_xmm0029740701_pi300-10000_pass1_cl_src3.arf
[Wed Sep 28 14:57:09 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 14:57:09 2011] Updating source flux to 6e-11