[Sun Sep 25 23:34:34 2011] Detection parameters:
  Position = (400.9, 434.0) = 13 35 19.16 -34 9 38.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 138.6 +/- 20.0
  Background counts = 100.9
  Rate = 0.001 +/- 0.0002

[Sun Sep 25 23:34:34 2011] Off-axis axis estimate = 12.32'
[Mon Sep 26 01:28:04 2011] Using EEF radius (= 12.59 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 01:28:04 2011] Initial guess for spatial extent in simple fitting = 12.59"
[Mon Sep 26 01:28:04 2011] source mask rpix=2.9, npix_max = 46, mask sum = 38, frac = 0.825
[Mon Sep 26 01:28:04 2011] Giving source the simple spatial ID 25 for pass 0, mean size = 12.59"
[Mon Sep 26 02:08:37 2011] fullrun_mos1_xmm0029740701_pi300-10000_cl_pass0_src25.ximg exists
[Mon Sep 26 02:08:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0029740701_pi300-10000_cl_pass0_src25.csv
[Mon Sep 26 02:08:37 2011] fullrun_mos1_xmm0029740701_pi300-10000_cl_pass0_src25_1.ximg exists
[Mon Sep 26 02:08:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0029740701_pi300-10000_cl_pass0_src25.csv
[Mon Sep 26 02:08:37 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0029740701_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0029740701_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 02:08:38 2011] fullrun_mos1_xmm0029740701_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Mon Sep 26 02:08:38 2011] fullrun_mos1_xmm0029740701_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Mon Sep 26 02:08:38 2011] Fit fullrun_mos1_xmm0029740701_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Mon Sep 26 04:08:33 2011] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 13.589636 pixels away
[Mon Sep 26 04:08:33 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 04:08:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 04:08:33 2011] Assessing source extent using major
[Mon Sep 26 04:08:33 2011] Source does appear to be extended
[Mon Sep 26 04:08:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 04:58:00 2011] Using EEF radius (= 12.59 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 04:58:00 2011] Initial guess for spatial extent in simple fitting = 12.59"
[Mon Sep 26 04:58:00 2011] source mask rpix=2.9, npix_max = 46, mask sum = 38, frac = 0.825
[Mon Sep 26 04:58:00 2011] Giving source the simple spatial ID 19 for pass 1, mean size = 12.59"
[Mon Sep 26 05:26:55 2011] fullrun_mos1_xmm0029740701_pi300-10000_cl_pass1_src19.ximg exists
[Mon Sep 26 05:26:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0029740701_pi300-10000_cl_pass1_src19.csv
[Mon Sep 26 05:26:55 2011] fullrun_mos1_xmm0029740701_pi300-10000_cl_pass1_src19_1.ximg exists
[Mon Sep 26 05:26:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0029740701_pi300-10000_cl_pass1_src19.csv
[Mon Sep 26 05:26:55 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0029740701_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0029740701_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 05:26:55 2011] fullrun_mos1_xmm0029740701_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Mon Sep 26 05:26:55 2011] fullrun_mos1_xmm0029740701_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Mon Sep 26 05:26:55 2011] Fit fullrun_mos1_xmm0029740701_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Mon Sep 26 07:05:12 2011] Spatial fit model total counts = 946.168000, observed total counts = 948.000000
[Mon Sep 26 07:05:12 2011] Offset between fit and detection position for source 16 = 5.801799 pixels
[Mon Sep 26 07:05:12 2011] 922.369000 total counts/ 387.083000 bgd. counts: snr = 27.207199
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 5.801799 pixels
  Position = (406.4, 432.2) = 13 35 17.22 -34 9 46.1
  Extent = 25.2 (25.2-50.4)", rotation angle = 0
  Source counts = 535.3 +/- 30.4
  Background counts = 387.1
  Rate = 0.005 +/- 0.0003
[Mon Sep 26 07:05:12 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 07:05:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 07:05:12 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 07:05:12 2011] Source does appear to be extended
[Mon Sep 26 07:05:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 07:05:12 2011] Source is confused with source 8
[Mon Sep 26 07:05:12 2011] Source is confused with source 18
[Wed Sep 28 11:21:09 2011] XMMSAS src. selection expression = ellipse(35307.782000, 37554.826400, 1510.572043, 1510.572043, 0.000000, X, Y)
[Wed Sep 28 11:21:09 2011] Writing source region out to fullrun_mos1_xmm0029740701_pi300-10000_pass1_cl_src16_src.reg
[Wed Sep 28 11:21:09 2011] Extracting stamp from image fullrun_mos1_xmm0029740701_pi300-10000_cl_sm2.00.img.gz, (320, 345) - (493, 519)
[Wed Sep 28 11:21:09 2011] XMMSAS bgd. selection expression = annulus(35307.782000, 37554.826400, 2517.620072, 5035.240145, X, Y) && !ellipse(30249.138489, 37695.478790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35532.525028, 37509.425000, 343.847210, 343.847210, 0.000000, X, Y) && !ellipse(29499.182983, 39241.335083, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36038.307739, 37397.369446, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Sep 28 11:21:09 2011] Writing fullrun_mos1_xmm0029740701_pi300-10000_pass1_cl_src16.gif
[Wed Sep 28 11:35:00 2011] Mean detx,y = (5002.97, 12147.75) 
[Wed Sep 28 11:35:01 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Sep 28 11:35:41 2011] Binned source spectrum to 10 counts/bin
[Wed Sep 28 11:35:41 2011] Setting source spectrum file to fullrun_mos1_xmm0029740701_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Wed Sep 28 11:35:41 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0029740701_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Wed Sep 28 14:55:39 2011] Updating aperture counts using extracted products
[Wed Sep 28 14:55:39 2011] Error reading totcts from fullrun_mos1_xmm0029740701_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Wed Sep 28 14:55:40 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 14:55:40 2011] Using photon index=1.80, rate=0.00463, arf fullrun_mos1_xmm0029740701_pi300-10000_pass1_cl_src16.arf
[Wed Sep 28 14:55:40 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 14:55:40 2011] Updating source flux to 7.5e-14
[Wed Sep 28 14:55:43 2011] Flag c found in src. 16 procflags, skipping spectral fitting