[Sun Sep 25 23:34:33 2011] Detection parameters:
  Position = (176.6, 437.0) = 13 36 37.75 -34 9 24.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 224.3 +/- 23.3
  Background counts = 90.6
  Rate = 0.002 +/- 0.0002

[Sun Sep 25 23:34:34 2011] Off-axis axis estimate = 13.38'
[Mon Sep 26 01:28:04 2011] Using EEF radius (= 13.12 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 01:28:04 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep 26 01:28:04 2011] Initial guess for spatial extent in simple fitting = 13.12"
[Mon Sep 26 01:28:04 2011] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.991
[Mon Sep 26 01:28:04 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 13.12"
[Mon Sep 26 02:08:37 2011] fullrun_mos1_xmm0029740701_pi300-10000_cl_pass0_src13.ximg exists
[Mon Sep 26 02:08:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0029740701_pi300-10000_cl_pass0_src13.csv
[Mon Sep 26 02:08:37 2011] fullrun_mos1_xmm0029740701_pi300-10000_cl_pass0_src13_1.ximg exists
[Mon Sep 26 02:08:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0029740701_pi300-10000_cl_pass0_src13.csv
[Mon Sep 26 02:08:37 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0029740701_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0029740701_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 02:08:38 2011] fullrun_mos1_xmm0029740701_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Mon Sep 26 02:08:38 2011] fullrun_mos1_xmm0029740701_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Mon Sep 26 02:08:38 2011] Fit fullrun_mos1_xmm0029740701_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Mon Sep 26 04:08:33 2011] Warning, spatial fit 13 centroid is now closest to src. 19
[Mon Sep 26 04:08:33 2011] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 13.008543 pixels away
[Mon Sep 26 04:08:33 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 04:08:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 04:08:33 2011] Assessing source extent using major
[Mon Sep 26 04:08:33 2011] Source does appear to be extended
[Mon Sep 26 04:08:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 04:58:00 2011] Using EEF radius (= 13.12 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 04:58:00 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep 26 04:58:00 2011] Initial guess for spatial extent in simple fitting = 13.12"
[Mon Sep 26 04:58:00 2011] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.991
[Mon Sep 26 04:58:00 2011] Giving source the simple spatial ID 12 for pass 1, mean size = 13.12"
[Mon Sep 26 05:26:55 2011] fullrun_mos1_xmm0029740701_pi300-10000_cl_pass1_src12.ximg exists
[Mon Sep 26 05:26:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0029740701_pi300-10000_cl_pass1_src12.csv
[Mon Sep 26 05:26:55 2011] fullrun_mos1_xmm0029740701_pi300-10000_cl_pass1_src12_1.ximg exists
[Mon Sep 26 05:26:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0029740701_pi300-10000_cl_pass1_src12.csv
[Mon Sep 26 05:26:55 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0029740701_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0029740701_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 05:26:55 2011] fullrun_mos1_xmm0029740701_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Mon Sep 26 05:26:55 2011] fullrun_mos1_xmm0029740701_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Mon Sep 26 05:26:55 2011] Fit fullrun_mos1_xmm0029740701_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Mon Sep 26 07:05:12 2011] Spatial fit model total counts = 1076.000000, observed total counts = 1076.000000
[Mon Sep 26 07:05:12 2011] Offset between fit and detection position for source 14 = 0.247410 pixels
[Mon Sep 26 07:05:12 2011] 1073.440000 total counts/ 925.586000 bgd. counts: snr = 4.859870
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.247410 pixels
  Position = (176.8, 437.2) = 13 36 37.69 -34 9 24.4
  Extent = 6.3 (5.0-7.6)", rotation angle = 0
  Source counts = 147.9 +/- 32.8
  Background counts = 925.6
  Rate = 0.001 +/- 0.0003
[Mon Sep 26 07:05:12 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 07:05:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 07:05:12 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 07:05:12 2011] Source does appear to be extended
[Mon Sep 26 07:05:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 11:21:09 2011] XMMSAS src. selection expression = ellipse(15333.511400, 37987.148400, 376.948811, 376.948811, 0.000000, X, Y)
[Wed Sep 28 11:21:09 2011] Writing source region out to fullrun_mos1_xmm0029740701_pi300-10000_pass1_cl_src14_src.reg
[Wed Sep 28 11:21:09 2011] Extracting stamp from image fullrun_mos1_xmm0029740701_pi300-10000_cl_sm2.00.img.gz, (155, 416) - (198, 459)
[Wed Sep 28 11:21:09 2011] XMMSAS bgd. selection expression = annulus(15333.511400, 37987.148400, 628.248018, 1256.496036, X, Y) && !ellipse(16941.661713, 35997.781372, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Sep 28 11:21:09 2011] Writing fullrun_mos1_xmm0029740701_pi300-10000_pass1_cl_src14.gif
[Wed Sep 28 11:32:21 2011] Mean detx,y = (14058.55, -5665.46) 
[Wed Sep 28 11:32:22 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Sep 28 11:32:28 2011] Binned source spectrum to 10 counts/bin
[Wed Sep 28 11:32:28 2011] Setting source spectrum file to fullrun_mos1_xmm0029740701_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Wed Sep 28 11:32:28 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0029740701_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Wed Sep 28 14:55:39 2011] Updating aperture counts using extracted products
[Wed Sep 28 14:55:39 2011] Error reading totcts from fullrun_mos1_xmm0029740701_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Wed Sep 28 14:55:40 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 14:55:40 2011] Using photon index=1.80, rate=0.00128, arf fullrun_mos1_xmm0029740701_pi300-10000_pass1_cl_src14.arf
[Wed Sep 28 14:55:40 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Sep 28 14:55:40 2011] Updating source flux to 4.1e-14