[Sun Sep 25 02:52:57 2011] Detection parameters:
  Position = (322.3, 279.3) = 13 35 46.43 -34 20 52.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1519.1 +/- 61.4
  Background counts = 671.9
  Rate = 0.03 +/- 0.001

[Sun Sep 25 02:52:57 2011] Off-axis axis estimate = 2.22'
[Sun Sep 25 03:17:33 2011] Using EEF radius (= 7.54 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 03:17:33 2011] Initial guess for spatial extent in simple fitting = 7.54"
[Sun Sep 25 03:17:33 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.003
[Sun Sep 25 03:17:33 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.54"
[Sun Sep 25 03:35:55 2011] fullrun_pn_xmm0029740101_pi300-10000_cl_pass0_src1.ximg exists
[Sun Sep 25 03:35:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0029740101_pi300-10000_cl_pass0_src1.csv
[Sun Sep 25 03:35:55 2011] fullrun_pn_xmm0029740101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Sep 25 03:35:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0029740101_pi300-10000_cl_pass0_src1.csv
[Sun Sep 25 03:35:55 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0029740101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0029740101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 03:35:55 2011] fullrun_pn_xmm0029740101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Sep 25 03:35:55 2011] fullrun_pn_xmm0029740101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Sep 25 03:35:55 2011] Fit fullrun_pn_xmm0029740101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Sep 25 05:23:22 2011] Warning, spatial fit 1 centroid is now closest to src. 4
[Sun Sep 25 05:23:22 2011] Spatial fit model total counts = 11478.100000, observed total counts = 11488.000000
[Sun Sep 25 05:23:22 2011] Offset between fit and detection position for source 1 = 2.464485 pixels
[Sun Sep 25 05:23:22 2011] Warning, changing simple spatial fit ID from 1 to 4
[Sun Sep 25 05:23:22 2011] 11669.070000 total counts/ 8421.600000 bgd. counts: snr = 35.387334
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.464485 pixels
  Position = (321.3, 281.5) = 13 35 46.77 -34 20 42.0
  Extent = 14.6 (14.5-29.2)", rotation angle = 0
  Source counts = 3247.5 +/- 108.0
  Background counts = 8421.6
  Rate = 0.04 +/- 0.001
[Sun Sep 25 05:23:22 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 05:23:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 05:23:22 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 05:23:22 2011] Source does appear to be extended
[Sun Sep 25 05:23:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 05:23:22 2011] Source is confused with source 3
[Sun Sep 25 05:23:22 2011] Source is confused with source 4
[Sun Sep 25 05:23:36 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 05:23:36 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Sep 25 05:23:36 2011] Initial guess for spatial extent in simple fitting = 14.60"
[Sun Sep 25 05:23:36 2011] source mask rpix=3.4, npix_max = 59, mask sum = 56, frac = 0.942
[Sun Sep 25 05:23:36 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 14.60"
[Sun Sep 25 06:12:53 2011] fullrun_pn_xmm0029740101_pi300-10000_cl_pass1_src1.ximg exists
[Sun Sep 25 06:12:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0029740101_pi300-10000_cl_pass1_src1.csv
[Sun Sep 25 06:12:53 2011] fullrun_pn_xmm0029740101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Sep 25 06:12:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0029740101_pi300-10000_cl_pass1_src1.csv
[Sun Sep 25 06:12:53 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0029740101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0029740101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 06:12:53 2011] fullrun_pn_xmm0029740101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Sep 25 06:12:53 2011] fullrun_pn_xmm0029740101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Sep 25 06:12:53 2011] Fit fullrun_pn_xmm0029740101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Sep 25 07:25:26 2011] Spatial fit model total counts = 19758.200000, observed total counts = 20380.000000
[Sun Sep 25 07:25:26 2011] Offset between fit and detection position for source 1 = 0.344401 pixels
[Sun Sep 25 07:25:26 2011] 19989.510000 total counts/ 15926.100000 bgd. counts: snr = 32.198521
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.344401 pixels
  Position = (321.6, 281.6) = 13 35 46.65 -34 20 41.8
  Extent = 14.6 (14.3-15.2)", rotation angle = 0
  Source counts = 4063.4 +/- 141.4
  Background counts = 15926.1
  Rate = 0.05 +/- 0.002
[Sun Sep 25 07:25:26 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 07:25:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 07:25:26 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 07:25:26 2011] Source does appear to be extended
[Sun Sep 25 07:25:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 07:25:34 2011] Counts = 4063.410000, rescaling region sizes by 2.000000
[Sun Sep 25 07:25:34 2011] XMMSAS src. selection expression = ellipse(27934.723000, 24448.283400, 1754.196050, 1754.196050, 0.000000, X, Y)
[Sun Sep 25 07:25:34 2011] Writing source region out to fullrun_pn_xmm0029740101_pi300-10000_pass1_cl_src1_src.reg
[Sun Sep 25 07:25:34 2011] Extracting stamp from image fullrun_pn_xmm0029740101_pi300-10000_cl_sm2.00.img.gz, (221, 181) - (422, 382)
[Sun Sep 25 07:25:34 2011] XMMSAS bgd. selection expression = annulus(27934.723000, 24448.283400, 5847.320168, 11694.640337, X, Y) && !ellipse(26167.134400, 27981.284800, 1797.856512, 1797.856512, 0.000000, X, Y) && !ellipse(27246.844000, 25727.280000, 1146.856033, 1146.856033, 0.000000, X, Y) && !ellipse(27664.329200, 24910.192000, 1197.152034, 443.364813, 63.872500, X, Y) && !ellipse(29317.938000, 27427.838000, 1263.152036, 1263.152036, 0.000000, X, Y) && !ellipse(26717.534000, 23563.678000, 1024.464029, 1024.464029, 0.000000, X, Y)
[Sun Sep 25 07:25:34 2011] Writing fullrun_pn_xmm0029740101_pi300-10000_pass1_cl_src1.gif
[Sun Sep 25 07:30:12 2011] Mean detx,y = (106.09, 3056.99) 
[Sun Sep 25 07:30:22 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Sep 25 07:31:40 2011] Binned source spectrum to 10 counts/bin
[Sun Sep 25 07:31:40 2011] Setting source spectrum file to fullrun_pn_xmm0029740101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Sep 25 07:31:40 2011] Setting bgd. spectrum file to fullrun_pn_xmm0029740101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Sep 25 11:57:38 2011] Updating aperture counts using extracted products
[Sun Sep 25 11:57:38 2011] Error reading totcts from fullrun_pn_xmm0029740101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Sep 25 11:57:38 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 11:57:38 2011] Using photon index=1.80, rate=0.0502, arf fullrun_pn_xmm0029740101_pi300-10000_pass1_cl_src1.arf
[Sun Sep 25 11:57:38 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Sep 25 11:57:38 2011] Updating source flux to 1.7e-13
[Sun Sep 25 11:58:42 2011] Flag c found in src. 1 procflags, skipping spectral fitting
[Sun Sep 25 11:59:45 2011] Reading fit data from xmm0029740101/analysis//spectral/fullrun_pn_xmm0029740101_pi300-10000_pass1_cl_src1_pl.csv
[Sun Sep 25 11:59:45 2011] Spectral fit parameter nH value = 1.05929e+13
[Sun Sep 25 11:59:45 2011] Spectral fit parameter PhoIndex value = 0.974442
[Sun Sep 25 11:59:45 2011] Failed to get F(0.3-8.0) from xmm0029740101/analysis//spectral/fullrun_pn_xmm0029740101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Sep 25 11:59:45 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 11:59:45 2011] Using Nh = 1.1e+13, photon index=0.97, rate=0.0502, arf fullrun_pn_xmm0029740101_pi300-10000_pass1_cl_src1.arf
[Sun Sep 25 11:59:45 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Sep 25 11:59:45 2011] Updating source flux to 3.1e-13