[Sun Sep 25 02:53:51 2011] Detection parameters:
  Position = (307.6, 332.1) = 13 35 51.59 -34 16 58.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 932.1 +/- 49.6
  Background counts = 133.9
  Rate = 0.02 +/- 0.0008

[Sun Sep 25 02:53:52 2011] Off-axis axis estimate = 2.53'
[Sun Sep 25 04:16:33 2011] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 04:16:33 2011] Initial guess for spatial extent in simple fitting = 7.69"
[Sun Sep 25 04:16:33 2011] source mask rpix=1.8, npix_max = 20, mask sum = 12, frac = 0.583
[Sun Sep 25 04:16:33 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 7.69"
[Sun Sep 25 05:23:20 2011] fullrun_mos2_xmm0029740101_pi300-10000_cl_pass0_src2.ximg exists
[Sun Sep 25 05:23:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0029740101_pi300-10000_cl_pass0_src2.csv
[Sun Sep 25 05:23:20 2011] fullrun_mos2_xmm0029740101_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun Sep 25 05:23:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0029740101_pi300-10000_cl_pass0_src2.csv
[Sun Sep 25 05:23:20 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0029740101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0029740101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 05:23:20 2011] fullrun_mos2_xmm0029740101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun Sep 25 05:23:20 2011] fullrun_mos2_xmm0029740101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun Sep 25 05:23:20 2011] Fit fullrun_mos2_xmm0029740101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sun Sep 25 05:23:30 2011] Source 4 is offset by 6.171510 and 6.124119 pixels which is larger than
2 X fitted extent = 3.410363 x 3.410363, not incorporating fit results
[Sun Sep 25 05:23:30 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 05:23:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 05:23:30 2011] Assessing source extent using major
[Sun Sep 25 05:23:30 2011] Source does appear to be extended
[Sun Sep 25 05:23:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 06:30:57 2011] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 06:30:57 2011] Initial guess for spatial extent in simple fitting = 7.69"
[Sun Sep 25 06:30:57 2011] source mask rpix=1.8, npix_max = 20, mask sum = 12, frac = 0.583
[Sun Sep 25 06:30:57 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 7.69"
[Sun Sep 25 07:25:24 2011] fullrun_mos2_xmm0029740101_pi300-10000_cl_pass1_src2.ximg exists
[Sun Sep 25 07:25:24 2011] fullrun_mos2_xmm0029740101_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun Sep 25 07:25:24 2011] Fit fullrun_mos2_xmm0029740101_pi300-10000_cl_pass1_src2 appears to have run properly
[Sun Sep 25 07:25:24 2011] fullrun_mos2_xmm0029740101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun Sep 25 07:25:24 2011] fullrun_mos2_xmm0029740101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun Sep 25 07:25:24 2011] Fit fullrun_mos2_xmm0029740101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sun Sep 25 07:25:30 2011] Source 4 is offset by 6.210751 and 6.124119 pixels which is larger than
2 X fitted extent = 3.666855 x 3.004258, not incorporating fit results
[Sun Sep 25 07:25:30 2011] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 175.553018 pixels away
[Sun Sep 25 07:25:30 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 07:25:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 07:25:30 2011] Assessing source extent using major
[Sun Sep 25 07:25:30 2011] Source does appear to be extended
[Sun Sep 25 07:25:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 11:31:16 2011] XMMSAS src. selection expression = ellipse(26710.531372, 28839.992310, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Sep 25 11:31:16 2011] Writing source region out to fullrun_mos2_xmm0029740101_pi300-10000_pass1_cl_src4_src.reg
[Sun Sep 25 11:31:16 2011] Extracting stamp from image fullrun_mos2_xmm0029740101_pi300-10000_cl_sm2.00.img.gz, (270, 295) - (345, 370)
[Sun Sep 25 11:31:16 2011] XMMSAS bgd. selection expression = annulus(26710.531372, 28839.992310, 1087.500000, 2175.000000, X, Y) && !ellipse(26165.995200, 27972.792000, 1582.212046, 1582.212046, 0.000000, X, Y) && !ellipse(27270.044281, 28118.233215, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Sep 25 11:31:16 2011] Writing fullrun_mos2_xmm0029740101_pi300-10000_pass1_cl_src4.gif
[Sun Sep 25 11:36:35 2011] Mean detx,y = (-457.80, 509.55) 
[Sun Sep 25 11:36:36 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Sep 25 11:36:53 2011] Binned source spectrum to 10 counts/bin
[Sun Sep 25 11:36:53 2011] Setting source spectrum file to fullrun_mos2_xmm0029740101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Sep 25 11:36:53 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0029740101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun Sep 25 11:43:11 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Sep 25 11:43:11 2011] rmf not generated due to insufficient counts
[Sun Sep 25 11:57:39 2011] Updating aperture counts using extracted products
[Sun Sep 25 11:57:39 2011] Error reading totcts from fullrun_mos2_xmm0029740101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Sep 25 11:57:39 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 11:57:39 2011] Using photon index=1.80, rate=0.0152, arf fullrun_mos2_xmm0029740101_pi300-10000_pass1_cl_src4.arf
[Sun Sep 25 11:57:39 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Sep 25 11:57:39 2011] Updating source flux to 1.6e-13
[Sun Sep 25 11:58:22 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting