[Sun Sep 25 02:53:51 2011] Detection parameters:
  Position = (301.5, 322.0) = 13 35 53.73 -34 17 45.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 587236.5 +/- 819.0
  Background counts = 135.0
  Rate = 8 +/- 0.01

[Sun Sep 25 02:53:52 2011] Off-axis axis estimate = 1.72'
[Sun Sep 25 04:16:33 2011] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 04:16:33 2011] Initial guess for spatial extent in simple fitting = 7.29"
[Sun Sep 25 04:16:33 2011] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.056
[Sun Sep 25 04:16:33 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Sun Sep 25 05:23:20 2011] fullrun_mos2_xmm0029740101_pi300-10000_cl_pass0_src1.ximg exists
[Sun Sep 25 05:23:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0029740101_pi300-10000_cl_pass0_src1.csv
[Sun Sep 25 05:23:20 2011] fullrun_mos2_xmm0029740101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Sep 25 05:23:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0029740101_pi300-10000_cl_pass0_src1.csv
[Sun Sep 25 05:23:20 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0029740101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0029740101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 05:23:20 2011] fullrun_mos2_xmm0029740101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Sep 25 05:23:20 2011] fullrun_mos2_xmm0029740101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Sep 25 05:23:20 2011] Fit fullrun_mos2_xmm0029740101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Sep 25 05:23:30 2011] Spatial fit model total counts = 434607.000000, observed total counts = 458535.000000
[Sun Sep 25 05:23:30 2011] Offset between fit and detection position for source 1 = 0.180237 pixels
[Sun Sep 25 05:23:30 2011] 430179.000000 total counts/ 25600.000000 bgd. counts: snr = 2528.618750
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.180237 pixels
  Position = (301.3, 322.1) = 13 35 53.79 -34 17 45.6
  Extent = 6.6 (6.6-6.6)", rotation angle = 0
  Source counts = 404579.0 +/- 655.9
  Background counts = 25600.0
  Rate = 6 +/- 0.009
[Sun Sep 25 05:23:30 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 05:23:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 05:23:30 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 05:23:30 2011] Source does appear to be extended
[Sun Sep 25 05:23:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 06:30:57 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 06:30:57 2011] Initial guess for spatial extent in simple fitting = 6.59"
[Sun Sep 25 06:30:57 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.985
[Sun Sep 25 06:30:57 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 6.59"
[Sun Sep 25 07:25:24 2011] fullrun_mos2_xmm0029740101_pi300-10000_cl_pass1_src1.ximg exists
[Sun Sep 25 07:25:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0029740101_pi300-10000_cl_pass1_src1.csv
[Sun Sep 25 07:25:24 2011] fullrun_mos2_xmm0029740101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Sep 25 07:25:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0029740101_pi300-10000_cl_pass1_src1.csv
[Sun Sep 25 07:25:24 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0029740101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0029740101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 07:25:24 2011] fullrun_mos2_xmm0029740101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Sep 25 07:25:24 2011] fullrun_mos2_xmm0029740101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Sep 25 07:25:24 2011] Fit fullrun_mos2_xmm0029740101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Sep 25 07:25:30 2011] Spatial fit model total counts = 434608.000000, observed total counts = 458535.000000
[Sun Sep 25 07:25:30 2011] Offset between fit and detection position for source 1 = 0.000120 pixels
[Sun Sep 25 07:25:30 2011] 430171.000000 total counts/ 25600.000000 bgd. counts: snr = 2528.568750
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000120 pixels
  Position = (301.3, 322.1) = 13 35 53.79 -34 17 45.6
  Extent = 6.6 (6.6-6.6)", rotation angle = 0
  Source counts = 404571.0 +/- 655.9
  Background counts = 25600.0
  Rate = 6 +/- 0.009
[Sun Sep 25 07:25:30 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 07:25:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 07:25:30 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 07:25:30 2011] Source does appear to be extended
[Sun Sep 25 07:25:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 11:31:16 2011] Counts = 404571.000000, rescaling region sizes by 3.000000
[Sun Sep 25 11:31:16 2011] XMMSAS src. selection expression = ellipse(26165.995200, 27972.792000, 1186.659034, 1186.659034, 0.000000, X, Y)
[Sun Sep 25 11:31:16 2011] Writing source region out to fullrun_mos2_xmm0029740101_pi300-10000_pass1_cl_src1_src.reg
[Sun Sep 25 11:31:16 2011] Extracting stamp from image fullrun_mos2_xmm0029740101_pi300-10000_cl_sm2.00.img.gz, (233, 254) - (370, 390)
[Sun Sep 25 11:31:16 2011] XMMSAS bgd. selection expression = annulus(26165.995200, 27972.792000, 5933.295171, 11866.590341, X, Y) && !ellipse(26710.531372, 28839.992310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27270.044281, 28118.233215, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17966.185745, 17322.815063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34880.964539, 23105.439667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17492.113007, 32568.410126, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35422.666000, 37590.371800, 2039.784059, 2039.784059, 0.000000, X, Y)
[Sun Sep 25 11:31:16 2011] Writing fullrun_mos2_xmm0029740101_pi300-10000_pass1_cl_src1.gif
[Sun Sep 25 11:31:50 2011] Mean detx,y = (82.84, 115.13) 
[Sun Sep 25 11:31:55 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Sep 25 11:36:22 2011] Binned source spectrum to 10 counts/bin
[Sun Sep 25 11:36:22 2011] Setting source spectrum file to fullrun_mos2_xmm0029740101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Sep 25 11:36:22 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0029740101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Sep 25 11:57:39 2011] Updating aperture counts using extracted products
[Sun Sep 25 11:57:39 2011] Error reading totcts from fullrun_mos2_xmm0029740101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Sep 25 11:57:39 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 11:57:39 2011] Using photon index=1.80, rate=5.69, arf fullrun_mos2_xmm0029740101_pi300-10000_pass1_cl_src1.arf
[Sun Sep 25 11:57:39 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Sep 25 11:57:39 2011] Updating source flux to 5.8e-11
[Sun Sep 25 11:58:42 2011] Reading fit data from xmm0029740101/analysis//spectral/fullrun_mos2_xmm0029740101_pi300-10000_pass1_cl_src1_pl.csv
[Sun Sep 25 11:58:42 2011] Spectral fit parameter nH value = 33802700000.0
[Sun Sep 25 11:58:42 2011] Spectral fit parameter PhoIndex value = 1.78099
[Sun Sep 25 11:58:42 2011] Failed to get F(0.3-8.0) from xmm0029740101/analysis//spectral/fullrun_mos2_xmm0029740101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Sep 25 11:58:42 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 11:58:42 2011] Using Nh = 3.4e+10, photon index=1.78, rate=5.69, arf fullrun_mos2_xmm0029740101_pi300-10000_pass1_cl_src1.arf
[Sun Sep 25 11:58:42 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Sep 25 11:58:42 2011] Updating source flux to 5.8e-11